Commit e275ac47 authored by David Brownell's avatar David Brownell Committed by Linus Torvalds

kerneldoc for <linux/clk.h>

Add <linux/clk.h> to the generated kerneldoc, with some overview
to go along with those per-function descriptions.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent a3ed107e
...@@ -645,4 +645,58 @@ X!Idrivers/video/console/fonts.c ...@@ -645,4 +645,58 @@ X!Idrivers/video/console/fonts.c
!Edrivers/i2c/i2c-core.c !Edrivers/i2c/i2c-core.c
</chapter> </chapter>
<chapter id="clk">
<title>Clock Framework</title>
<para>
The clock framework defines programming interfaces to support
software management of the system clock tree.
This framework is widely used with System-On-Chip (SOC) platforms
to support power management and various devices which may need
custom clock rates.
Note that these "clocks" don't relate to timekeeping or real
time clocks (RTCs), each of which have separate frameworks.
These <structname>struct clk</structname> instances may be used
to manage for example a 96 MHz signal that is used to shift bits
into and out of peripherals or busses, or otherwise trigger
synchronous state machine transitions in system hardware.
</para>
<para>
Power management is supported by explicit software clock gating:
unused clocks are disabled, so the system doesn't waste power
changing the state of transistors that aren't in active use.
On some systems this may be backed by hardware clock gating,
where clocks are gated without being disabled in software.
Sections of chips that are powered but not clocked may be able
to retain their last state.
This low power state is often called a <emphasis>retention
mode</emphasis>.
This mode still incurs leakage currents, especially with finer
circuit geometries, but for CMOS circuits power is mostly used
by clocked state changes.
</para>
<para>
Power-aware drivers only enable their clocks when the device
they manage is in active use. Also, system sleep states often
differ according to which clock domains are active: while a
"standby" state may allow wakeup from several active domains, a
"mem" (suspend-to-RAM) state may require a more wholesale shutdown
of clocks derived from higher speed PLLs and oscillators, limiting
the number of possible wakeup event sources. A driver's suspend
method may need to be aware of system-specific clock constraints
on the target sleep state.
</para>
<para>
Some platforms support programmable clock generators. These
can be used by external chips of various kinds, such as other
CPUs, multimedia codecs, and devices with strict requirements
for interface clocking.
</para>
!Iinclude/linux/clk.h
</chapter>
</book> </book>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment