Commit e34cadde authored by Pratyush Anand's avatar Pratyush Anand Committed by Linus Torvalds

Pratyush Anand has moved

pratyush.anand@st.com email-id doesn't exist anymore as I have left the
company.  Replace ST's id with pratyush.anand@gmail.com.
Signed-off-by: default avatarPratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent b86a50c3
......@@ -95,6 +95,7 @@ Patrick Mochel <mochel@digitalimplant.org>
Peter A Jonsson <pj@ludd.ltu.se>
Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com>
Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
Praveen BP <praveenbp@ti.com>
Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org>
......
What: /config/pcie-gadget
Date: Feb 2011
KernelVersion: 2.6.37
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Interface is used to configure selected dual mode PCIe controller
......
......@@ -4,14 +4,14 @@ driver is bound with root hub device.
What: /sys/bus/usb/devices/.../get_dev_desc
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Get Device Descriptor"
for Link Layer Validation device. It is needed for TD.7.06.
What: /sys/bus/usb/devices/.../u1_timeout
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U1 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
......@@ -19,7 +19,7 @@ Description:
What: /sys/bus/usb/devices/.../u2_timeout
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Set "U2 timeout" for the downstream port where Link Layer
Validation device is connected. Timeout value must be between 0
......@@ -27,21 +27,21 @@ Description:
What: /sys/bus/usb/devices/.../hot_reset
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "Reset" for Link Layer Validation
device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
What: /sys/bus/usb/devices/.../u3_entry
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 entry" for Link Layer
Validation device. It is needed for TD.7.35 and TD.7.36.
What: /sys/bus/usb/devices/.../u3_exit
Date: March 2014
Contact: Pratyush Anand <pratyush.anand@st.com>
Contact: Pratyush Anand <pratyush.anand@gmail.com>
Description:
Write to this node to issue "U3 exit" for Link Layer
Validation device. It is needed for TD.7.36.
......@@ -2,7 +2,7 @@ Spear PCIe Gadget Driver:
Author
=============
Pratyush Anand (pratyush.anand@st.com)
Pratyush Anand (pratyush.anand@gmail.com)
Location
============
......
......@@ -2,7 +2,7 @@
* drivers/misc/spear13xx_pcie_gadget.c
*
* Copyright (C) 2010 ST Microelectronics
* Pratyush Anand<pratyush.anand@st.com>
* Pratyush Anand<pratyush.anand@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......
......@@ -4,7 +4,7 @@
* SPEAr13xx PCIe Glue Layer Source Code
*
* Copyright (C) 2010-2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
......@@ -386,5 +386,5 @@ static int __init spear13xx_pcie_init(void)
module_init(spear13xx_pcie_init);
MODULE_DESCRIPTION("ST Microelectronics SPEAr13xx PCIe host controller driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
......@@ -2,7 +2,7 @@
* ST SPEAr1310-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
......@@ -257,5 +257,5 @@ static struct platform_driver spear1310_miphy_driver = {
module_platform_driver(spear1310_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
......@@ -2,7 +2,7 @@
* ST spear1340-miphy driver
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Pratyush Anand <pratyush.anand@gmail.com>
* Mohit Kumar <mohit.kumar@st.com>
*
* This program is free software; you can redistribute it and/or modify
......@@ -290,5 +290,5 @@ static struct platform_driver spear1340_miphy_driver = {
module_platform_driver(spear1340_miphy_driver);
MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
MODULE_LICENSE("GPL v2");
......@@ -4,7 +4,7 @@
* Test pattern generation for Link Layer Validation System Tests
*
* Copyright (C) 2014 ST Microelectronics
* Pratyush Anand <pratyush.anand@st.com>
* Pratyush Anand <pratyush.anand@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment