Commit e353b325 authored by Adam Ford's avatar Adam Ford Committed by Shawn Guo

arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2

LDO1 and LDO2 settings are wrong and case the voltage to go above the
maximum level of 2.15V permitted by the SoC to 3.0V.

This patch is based on work done on the i.MX8M Mini-EVK which utilizes
the same fix.

Fixes: 593816fa ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Reviewed-by: default avatarDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent cfb12c89
...@@ -136,7 +136,7 @@ buck6_reg: BUCK6 { ...@@ -136,7 +136,7 @@ buck6_reg: BUCK6 {
ldo1_reg: LDO1 { ldo1_reg: LDO1 {
regulator-name = "LDO1"; regulator-name = "LDO1";
regulator-min-microvolt = <3000000>; regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
regulator-boot-on; regulator-boot-on;
regulator-always-on; regulator-always-on;
...@@ -144,7 +144,7 @@ ldo1_reg: LDO1 { ...@@ -144,7 +144,7 @@ ldo1_reg: LDO1 {
ldo2_reg: LDO2 { ldo2_reg: LDO2 {
regulator-name = "LDO2"; regulator-name = "LDO2";
regulator-min-microvolt = <900000>; regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>; regulator-max-microvolt = <900000>;
regulator-boot-on; regulator-boot-on;
regulator-always-on; regulator-always-on;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment