Commit e3cc9319 authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Masahiro Yamada

ARM: dts: uniphier: add AVE ethernet node

Add nodes of the AVE ethernet controller for Pro4, PXs2, LD6b SoCs
and the boards.
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: default avatarJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent acc625de
...@@ -67,6 +67,17 @@ &i2c0 { ...@@ -67,6 +67,17 @@ &i2c0 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@0 {
reg = <0>;
};
};
&nand { &nand {
status = "okay"; status = "okay";
}; };
...@@ -77,3 +77,14 @@ &usb2 { ...@@ -77,3 +77,14 @@ &usb2 {
&usb3 { &usb3 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@1 {
reg = <1>;
};
};
...@@ -75,6 +75,17 @@ &usb3 { ...@@ -75,6 +75,17 @@ &usb3 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@0 {
reg = <0>;
};
};
&nand { &nand {
status = "okay"; status = "okay";
}; };
...@@ -72,3 +72,14 @@ &usb2 { ...@@ -72,3 +72,14 @@ &usb2 {
&usb3 { &usb3 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@1 {
reg = <1>;
};
};
...@@ -366,6 +366,24 @@ sys_rst: reset { ...@@ -366,6 +366,24 @@ sys_rst: reset {
}; };
}; };
eth: ethernet@65000000 {
compatible = "socionext,uniphier-pro4-ave4";
status = "disabled";
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
clocks = <&sys_clk 6>;
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
};
};
nand: nand@68000000 { nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5a"; compatible = "socionext,uniphier-denali-nand-v5a";
status = "disabled"; status = "disabled";
......
...@@ -53,3 +53,14 @@ eeprom@54 { ...@@ -53,3 +53,14 @@ eeprom@54 {
&i2c2 { &i2c2 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@1 {
reg = <1>;
};
};
...@@ -41,3 +41,14 @@ &serial2 { ...@@ -41,3 +41,14 @@ &serial2 {
&i2c0 { &i2c0 {
status = "okay"; status = "okay";
}; };
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@1 {
reg = <1>;
};
};
...@@ -446,6 +446,24 @@ pvtctl: pvtctl { ...@@ -446,6 +446,24 @@ pvtctl: pvtctl {
}; };
}; };
eth: ethernet@65000000 {
compatible = "socionext,uniphier-pxs2-ave4";
status = "disabled";
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
clocks = <&sys_clk 6>;
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
};
};
nand: nand@68000000 { nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b"; compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled"; status = "disabled";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment