[PATCH] pcmcia: remove irq_mask and irq_list parameters from PCMCIA drivers

Remove the now useless irq_mask and irq_list parameters from PCMCIA drivers.
Users should use either the socket driver's irq_mask / irq_list parameter or
use /sys/class/pcmcia_socket/pcmcia_socket%n/card_irq_mask which will be added
in a subsequent patch.
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/bluetooth/bluecard_cs.c

@@ -55,13 +55,6 @@
 /* ======================== Module parameters ======================== */
 
 
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0x86bc;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, uint, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
 MODULE_LICENSE("GPL");
@@ -871,7 +864,7 @@ static dev_link_t *bluecard_attach(void)
 	bluecard_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	/* Create new info device */
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -885,13 +878,7 @@ static dev_link_t *bluecard_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = bluecard_interrupt;
 	link->irq.Instance = info;

drivers/bluetooth/bt3c_cs.c

@@ -63,13 +63,6 @@
 /* ======================== Module parameters ======================== */
 
 
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xffff;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, uint, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
 MODULE_LICENSE("GPL");
@@ -676,7 +669,7 @@ static dev_link_t *bt3c_attach(void)
 	bt3c_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	/* Create new info device */
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -690,13 +683,7 @@ static dev_link_t *bt3c_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = bt3c_interrupt;
 	link->irq.Instance = info;

drivers/bluetooth/btuart_cs.c

@@ -59,13 +59,6 @@
 /* ======================== Module parameters ======================== */
 
 
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xffff;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, uint, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
 MODULE_LICENSE("GPL");
@@ -595,7 +588,7 @@ static dev_link_t *btuart_attach(void)
 	btuart_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	/* Create new info device */
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -609,13 +602,7 @@ static dev_link_t *btuart_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = btuart_interrupt;
 	link->irq.Instance = info;

drivers/bluetooth/dtl1_cs.c

@@ -59,13 +59,6 @@
 /* ======================== Module parameters ======================== */
 
 
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xffff;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, uint, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
 MODULE_LICENSE("GPL");
@@ -574,7 +567,7 @@ static dev_link_t *dtl1_attach(void)
 	dtl1_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	/* Create new info device */
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -588,13 +581,7 @@ static dev_link_t *dtl1_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = dtl1_interrupt;
 	link->irq.Instance = info;

drivers/char/pcmcia/synclink_cs.c

@@ -464,16 +464,6 @@ static int debug_level = 0;
 static int maxframe[MAX_DEVICE_COUNT] = {0,};
 static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
 
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_int irq_mask = 0xdeb8;
-
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 module_param(break_on_load, bool, 0);
 module_param(ttymajor, int, 0);
 module_param(debug_level, int, 0);
@@ -555,7 +545,7 @@ static dev_link_t *mgslpc_attach(void)
     MGSLPC_INFO *info;
     dev_link_t *link;
     client_reg_t client_reg;
-    int ret, i;
+    int ret;
     
     if (debug_level >= DEBUG_LEVEL_INFO)
 	    printk("mgslpc_attach\n");
@@ -592,11 +582,6 @@ static dev_link_t *mgslpc_attach(void)
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1   = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	    link->irq.IRQInfo2 = irq_mask;
-    else
-	    for (i = 0; i < 4; i++)
-		    link->irq.IRQInfo2 |= 1 << irq_list[i];
     link->irq.Handler = NULL;
     
     link->conf.Attributes = 0;

drivers/ide/legacy/ide-cs.c

@@ -64,11 +64,6 @@ MODULE_LICENSE("Dual MPL/GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 #ifdef PCMCIA_DEBUG
 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
@@ -116,7 +111,7 @@ static dev_link_t *ide_attach(void)
     ide_info_t *info;
     dev_link_t *link;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "ide_attach()\n");
 
@@ -130,12 +125,7 @@ static dev_link_t *ide_attach(void)
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.IOAddrLines = 3;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;

drivers/isdn/hardware/avm/avm_cs.c

@@ -43,16 +43,6 @@ MODULE_LICENSE("GPL");
 
 /*====================================================================*/
 
-/* Parameters that can be set with 'insmod' */
-
-/* This means pick from 15, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static int default_irq_list[10] = { 15, 12, 11, 10, 9, 7, 5, 4, 3, -1 };
-static int irq_list[10] = { -1 };
-
-MODULE_PARM(irq_list, "1-10i");
-
-/*====================================================================*/
-
 /*
    The event() function is this driver's Card Services event handler.
    It will be called by Card Services when an appropriate card status
@@ -134,7 +124,7 @@ static dev_link_t *avmcs_attach(void)
     client_reg_t client_reg;
     dev_link_t *link;
     local_info_t *local;
-    int ret, i;
+    int ret;
     
     /* Initialize the dev_link_t structure */
     link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
@@ -151,14 +141,7 @@ static dev_link_t *avmcs_attach(void)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] != -1) {
-	    for (i = 0; i < 10 && irq_list[i] > 0; i++)
-	       link->irq.IRQInfo2 |= 1 << irq_list[i];
-    } else {
-	    for (i = 0; i < 10 && default_irq_list[i] > 0; i++)
-	       link->irq.IRQInfo2 |= 1 << default_irq_list[i];
-    }
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;

drivers/isdn/hisax/avma1_cs.c

@@ -53,11 +53,8 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-static int default_irq_list[11] = { 15, 13, 12, 11, 10, 9, 7, 5, 4, 3, -1 };
-static int irq_list[11] = { -1 };
 static int isdnprot = 2;
 
-module_param_array(irq_list, int, NULL, 0);
 module_param(isdnprot, int, 0);
 
 /*====================================================================*/
@@ -143,7 +140,7 @@ static dev_link_t *avma1cs_attach(void)
     client_reg_t client_reg;
     dev_link_t *link;
     local_info_t *local;
-    int ret, i;
+    int ret;
     
     DEBUG(0, "avma1cs_attach()\n");
 
@@ -173,15 +170,8 @@ static dev_link_t *avma1cs_attach(void)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] != -1) {
-	    for (i = 0; i < 10 && irq_list[i] > 0; i++)
-	       link->irq.IRQInfo2 |= 1 << irq_list[i];
-    } else {
-	    for (i = 0; i < 10 && default_irq_list[i] > 0; i++)
-	       link->irq.IRQInfo2 |= 1 << default_irq_list[i];
-    }
-    
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;

drivers/isdn/hisax/elsa_cs.c

@@ -81,16 +81,6 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-/* Bit map of interrupts to choose from, the old way */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, 3 */
-static u_long irq_mask = 0xdeb8;
-
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, ulong, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
@@ -187,7 +177,7 @@ static dev_link_t *elsa_cs_attach(void)
     client_reg_t client_reg;
     dev_link_t *link;
     local_info_t *local;
-    int ret, i;
+    int ret;
 
     DEBUG(0, "elsa_cs_attach()\n");
 
@@ -200,12 +190,7 @@ static dev_link_t *elsa_cs_attach(void)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID|IRQ_SHARE_ID;
-    if (irq_list[0] == -1)
-        link->irq.IRQInfo2 = irq_mask;
-    else
-        for (i = 0; i < 4; i++)
-            link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*

drivers/isdn/hisax/sedlbauer_cs.c

@@ -82,15 +82,6 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_int irq_mask = 0xdeb8;
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
@@ -195,7 +186,7 @@ static dev_link_t *sedlbauer_attach(void)
     local_info_t *local;
     dev_link_t *link;
     client_reg_t client_reg;
-    int ret, i;
+    int ret;
     
     DEBUG(0, "sedlbauer_attach()\n");
 
@@ -208,14 +199,9 @@ static dev_link_t *sedlbauer_attach(void)
     
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
-    
+
     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost

drivers/isdn/hisax/teles_cs.c

@@ -62,16 +62,6 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-/* Bit map of interrupts to choose from, the old way */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, 3 */
-static u_long irq_mask = 0xdeb8;
-
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, ulong, 0);
-module_param_array(irq_list, int, NULL, 0);
-
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
@@ -168,7 +158,7 @@ static dev_link_t *teles_attach(void)
     client_reg_t client_reg;
     dev_link_t *link;
     local_info_t *local;
-    int ret, i;
+    int ret;
 
     DEBUG(0, "teles_attach()\n");
 
@@ -181,12 +171,7 @@ static dev_link_t *teles_attach(void)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID|IRQ_SHARE_ID;
-    if (irq_list[0] == -1)
-        link->irq.IRQInfo2 = irq_mask;
-    else
-        for (i = 0; i < 4; i++)
-            link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*

drivers/net/pcmcia/3c574_cs.c

@@ -109,11 +109,6 @@ MODULE_LICENSE("GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Now-standard PC card module parameters. */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
 INT_MODULE_PARM(max_interrupt_work, 32);
 
@@ -275,7 +270,7 @@ static dev_link_t *tc574_attach(void)
 	client_reg_t client_reg;
 	dev_link_t *link;
 	struct net_device *dev;
-	int i, ret;
+	int ret;
 
 	DEBUG(0, "3c574_attach()\n");
 
@@ -291,12 +286,7 @@ static dev_link_t *tc574_attach(void)
 	link->io.NumPorts1 = 32;
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = &el3_interrupt;
 	link->irq.Instance = dev;
 	link->conf.Attributes = CONF_ENABLE_IRQ;

drivers/net/pcmcia/3c589_cs.c

@@ -131,11 +131,6 @@ MODULE_LICENSE("GPL");
 /* Special hook for setting if_port when module is loaded */
 INT_MODULE_PARM(if_port, 0);
 
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 #ifdef PCMCIA_DEBUG
 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
@@ -188,7 +183,7 @@ static dev_link_t *tc589_attach(void)
     client_reg_t client_reg;
     dev_link_t *link;
     struct net_device *dev;
-    int i, ret;
+    int ret;
 
     DEBUG(0, "3c589_attach()\n");
     
@@ -204,12 +199,7 @@ static dev_link_t *tc589_attach(void)
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &el3_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;

drivers/net/pcmcia/axnet_cs.c

@@ -73,14 +73,9 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
 MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver");
 MODULE_LICENSE("GPL");
 
+#ifdef PCMCIA_DEBUG
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask,	0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
-#ifdef PCMCIA_DEBUG
 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
 static char *version =
@@ -159,7 +154,7 @@ static dev_link_t *axnet_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
 
     DEBUG(0, "axnet_attach()\n");
 
@@ -173,12 +168,7 @@ static dev_link_t *axnet_attach(void)
     link = &info->link;
     link->priv = dev;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 

drivers/net/pcmcia/com20020_cs.c

@@ -115,12 +115,6 @@ module_param(backplane, int, 0);
 module_param(clockp, int, 0);
 module_param(clockm, int, 0);
 
-/* Bit map of interrupts to choose from */
-static u_int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 MODULE_LICENSE("GPL");
 
 /*====================================================================*/
@@ -158,7 +152,7 @@ static dev_link_t *com20020_attach(void)
     dev_link_t *link;
     com20020_dev_t *info;
     struct net_device *dev;
-    int i, ret;
+    int ret;
     struct arcnet_local *lp;
     
     DEBUG(0, "com20020_attach()\n");
@@ -192,12 +186,7 @@ static dev_link_t *com20020_attach(void)
     link->io.NumPorts1 = 16;
     link->io.IOAddrLines = 16;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;

drivers/net/pcmcia/fmvj18x_cs.c

@@ -69,12 +69,6 @@ MODULE_LICENSE("GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 /* SRAM configuration */
 /* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
 INT_MODULE_PARM(sram_config, 0);
@@ -248,7 +242,7 @@ static dev_link_t *fmvj18x_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "fmvj18x_attach()\n");
 
@@ -267,12 +261,7 @@ static dev_link_t *fmvj18x_attach(void)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &fjn_interrupt;
     link->irq.Instance = dev;
     

drivers/net/pcmcia/ibmtr_cs.c

@@ -86,10 +86,6 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-/* Bit map of interrupts to choose from */
-static u_int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
 /* MMIO base address */
 static u_long mmiobase = 0xce000;
 
@@ -102,8 +98,6 @@ static u_long sramsize = 64;
 /* Ringspeed 4,16 */
 static int ringspeed = 16;
 
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 module_param(mmiobase, ulong, 0);
 module_param(srambase, ulong, 0);
 module_param(sramsize, ulong, 0);
@@ -162,7 +156,7 @@ static dev_link_t *ibmtr_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "ibmtr_attach()\n");
 
@@ -184,12 +178,7 @@ static dev_link_t *ibmtr_attach(void)
     link->io.NumPorts1 = 4;
     link->io.IOAddrLines = 16;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &tok_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;

drivers/net/pcmcia/nmclan_cs.c

@@ -407,13 +407,8 @@ MODULE_LICENSE("GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
 INT_MODULE_PARM(if_port, 0);
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
 
 #ifdef PCMCIA_DEBUG
 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
@@ -461,7 +456,7 @@ static dev_link_t *nmclan_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
 
     DEBUG(0, "nmclan_attach()\n");
     DEBUG(1, "%s\n", rcsid);
@@ -479,12 +474,7 @@ static dev_link_t *nmclan_attach(void)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 5;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &mace_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;

drivers/net/pcmcia/pcnet_cs.c

@@ -89,11 +89,6 @@ MODULE_LICENSE("GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask,	0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 INT_MODULE_PARM(if_port,	1);	/* Transceiver type */
 INT_MODULE_PARM(use_big_buf,	1);	/* use 64K packet buffer? */
 INT_MODULE_PARM(mem_speed,	0);	/* shared mem speed, in ns */
@@ -256,7 +251,7 @@ static dev_link_t *pcnet_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
 
     DEBUG(0, "pcnet_attach()\n");
 
@@ -268,12 +263,7 @@ static dev_link_t *pcnet_attach(void)
     link->priv = dev;
 
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 

drivers/net/pcmcia/smc91c92_cs.c

@@ -76,11 +76,6 @@ MODULE_LICENSE("GPL");
 */
 INT_MODULE_PARM(if_port, 0);
 
-/* Bit map of interrupts to choose from. */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 #ifdef PCMCIA_DEBUG
 INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
 static const char *version =
@@ -320,7 +315,7 @@ static dev_link_t *smc91c92_attach(void)
     struct smc_private *smc;
     dev_link_t *link;
     struct net_device *dev;
-    int i, ret;
+    int ret;
 
     DEBUG(0, "smc91c92_attach()\n");
 
@@ -337,12 +332,7 @@ static dev_link_t *smc91c92_attach(void)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 4;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &smc_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;

drivers/net/pcmcia/xirc2ps_cs.c

@@ -257,9 +257,6 @@ MODULE_LICENSE("Dual MPL/GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-INT_MODULE_PARM(irq_mask,	0xdeb8);
 INT_MODULE_PARM(if_port,	0);
 INT_MODULE_PARM(full_duplex,	0);
 INT_MODULE_PARM(do_sound, 	1);
@@ -921,13 +918,7 @@ xirc2ps_config(dev_link_t * link)
     link->io.IOAddrLines =10;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
     link->irq.Attributes = IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else {
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
-    }
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     if (local->modem) {
 	int pass;
 
@@ -2025,23 +2016,17 @@ module_exit(exit_xirc2ps_cs);
 #ifndef MODULE
 static int __init setup_xirc2ps_cs(char *str)
 {
-	/* irq, irq_mask, if_port, full_duplex, do_sound, lockup_hack
-	 * [,irq2 [,irq3 [,irq4]]]
+	/* if_port, full_duplex, do_sound, lockup_hack
 	 */
 	int ints[10] = { -1 };
 
 	str = get_options(str, 9, ints);
 
 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
-	MAYBE_SET(irq_list[0], 1);
-	MAYBE_SET(irq_mask, 2);
 	MAYBE_SET(if_port, 3);
 	MAYBE_SET(full_duplex, 4);
 	MAYBE_SET(do_sound, 5);
 	MAYBE_SET(lockup_hack, 6);
-	MAYBE_SET(irq_list[1], 7);
-	MAYBE_SET(irq_list[2], 8);
-	MAYBE_SET(irq_list[3], 9);
 #undef  MAYBE_SET
 
 	return 0;

drivers/net/wireless/airo_cs.c

@@ -61,22 +61,12 @@ static char *version = "$Revision: 1.2 $";
 
 /*====================================================================*/
 
-/* Parameters that can be set with 'insmod' */
-
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_int irq_mask = 0xdeb8;
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
 MODULE_AUTHOR("Benjamin Reed");
 MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
                    cards.  This is the module that links the PCMCIA card \
 		   with the airo module.");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 
 /*====================================================================*/
 
@@ -178,7 +168,7 @@ static dev_link_t *airo_attach(void)
 	client_reg_t client_reg;
 	dev_link_t *link;
 	local_info_t *local;
-	int ret, i;
+	int ret;
 	
 	DEBUG(0, "airo_attach()\n");
 
@@ -192,12 +182,7 @@ static dev_link_t *airo_attach(void)
 	
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 	
 	/*

drivers/net/wireless/atmel_cs.c

@@ -74,20 +74,10 @@ static char *version = "$Revision: 1.2 $";
 
 /*====================================================================*/
 
-/* Parameters that can be set with 'insmod' */
-
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_int irq_mask = 0xdeb8;
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
 MODULE_AUTHOR("Simon Kelley");
 MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 
 /*====================================================================*/
 
@@ -190,7 +180,7 @@ static dev_link_t *atmel_attach(void)
 	client_reg_t client_reg;
 	dev_link_t *link;
 	local_info_t *local;
-	int ret, i;
+	int ret;
 	
 	DEBUG(0, "atmel_attach()\n");
 
@@ -204,12 +194,7 @@ static dev_link_t *atmel_attach(void)
 	
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 	
 	/*

drivers/net/wireless/netwave_cs.c

@@ -190,16 +190,9 @@ static u_int  scramble_key = 0x0;
  */
 static int mem_speed;
 
-/* Bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
 module_param(domain, int, 0);
 module_param(scramble_key, int, 0);
 module_param(mem_speed, int, 0);
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 
 /*====================================================================*/
 
@@ -438,7 +431,7 @@ static dev_link_t *netwave_attach(void)
     dev_link_t *link;
     struct net_device *dev;
     netwave_private *priv;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "netwave_attach()\n");
     
@@ -459,12 +452,7 @@ static dev_link_t *netwave_attach(void)
     
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &netwave_interrupt;
     
     /* General socket configuration */

drivers/net/wireless/orinoco_cs.c

@@ -54,18 +54,10 @@ MODULE_LICENSE("Dual MPL/GPL");
 
 /* Module parameters */
 
-/* The old way: bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static uint irq_mask = 0xdeb8;
-/* Newer, simpler way of listing specific interrupts */
-static int irq_list[4] = { -1 };
-
 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  * don't have any CIS entry for it. This workaround it... */
 static int ignore_cis_vcc; /* = 0 */
 
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 module_param(ignore_cis_vcc, int, 0);
 
 /********************************************************************/
@@ -161,7 +153,7 @@ orinoco_cs_attach(void)
 	struct orinoco_pccard *card;
 	dev_link_t *link;
 	client_reg_t client_reg;
-	int ret, i;
+	int ret;
 
 	dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
 	if (! dev)
@@ -175,12 +167,7 @@ orinoco_cs_attach(void)
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/* General socket configuration defaults can go here.  In this
@@ -415,16 +402,8 @@ orinoco_cs_config(dev_link_t *link)
 	 * the irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		int i;
-
 		link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-		link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-		if (irq_list[0] == -1)
-			link->irq.IRQInfo2 = irq_mask;
-		else
-			for (i=0; i<4; i++)
-				link->irq.IRQInfo2 |= 1 << irq_list[i];
-		
+		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
   		link->irq.Handler = orinoco_interrupt; 
   		link->irq.Instance = dev; 
 		

drivers/net/wireless/ray_cs.c

@@ -157,9 +157,6 @@ static void start_net(u_long local);
 
 /*===========================================================================*/
 /* Parameters that can be set with 'insmod' */
-/* Bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static u_long irq_mask = 0xdeb8;
 
 /* ADHOC=0, Infrastructure=1 */
 static int net_type = ADHOC;
@@ -222,7 +219,6 @@ MODULE_AUTHOR("Corey Thomas <corey@world.std.com>");
 MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver");
 MODULE_LICENSE("GPL");
 
-module_param(irq_mask, ulong, 0);
 module_param(net_type, int, 0);
 module_param(hop_dwell, int, 0);
 module_param(beacon_period, int, 0);
@@ -354,8 +350,7 @@ static dev_link_t *ray_attach(void)
 
     /* Interrupt setup. For PCMCIA, driver takes what's given */
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-    link->irq.IRQInfo2 = irq_mask;
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &ray_interrupt;
 
     /* General socket configuration */

drivers/net/wireless/wavelan_cs.c

@@ -4601,7 +4601,7 @@ wavelan_attach(void)
   dev_link_t *	link;		/* Info for cardmgr */
   struct net_device *	dev;		/* Interface generic data */
   net_local *	lp;		/* Interface specific data */
-  int		i, ret;
+  int		ret;
 
 #ifdef DEBUG_CALLBACK_TRACE
   printk(KERN_DEBUG "-> wavelan_attach()\n");
@@ -4619,12 +4619,7 @@ wavelan_attach(void)
 
   /* Interrupt setup */
   link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-  link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-  if (irq_list[0] == -1)
-    link->irq.IRQInfo2 = irq_mask;
-  else
-    for (i = 0; i < 4; i++)
-      link->irq.IRQInfo2 |= 1 << irq_list[i];
+  link->irq.IRQInfo1 = IRQ_LEVEL_ID;
   link->irq.Handler = wavelan_interrupt;
 
   /* General socket configuration */

drivers/net/wireless/wavelan_cs.p.h

@@ -795,17 +795,10 @@ static dev_link_t *dev_list = NULL;	/* Linked list of devices */
  * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
  */
 
-/* Bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4 and 3 */
-static int	irq_mask = 0xdeb8;
-static int 	irq_list[4] = { -1 };
-
 /* Shared memory speed, in ns */
 static int	mem_speed = 0;
 
 /* New module interface */
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 module_param(mem_speed, int, 0);
 
 #ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */

drivers/net/wireless/wl3501_cs.c

@@ -97,12 +97,6 @@ module_param(pc_debug, int, 0);
 #define WL3501_RESUME	0
 #define WL3501_SUSPEND	1
 
-/* Parameters that can be set with 'insmod' */
-/* Bit map of interrupts to choose from */
-/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4, and 3 */
-static unsigned int wl3501_irq_mask = 0xdeb8;
-static int wl3501_irq_list[4] = { -1 };
-
 /*
  * The event() function is this driver's Card Services event handler.  It will
  * be called by Card Services when an appropriate card status event is
@@ -1967,7 +1961,7 @@ static dev_link_t *wl3501_attach(void)
 	client_reg_t client_reg;
 	dev_link_t *link;
 	struct net_device *dev;
-	int ret, i;
+	int ret;
 
 	/* Initialize the dev_link_t structure */
 	link = kmalloc(sizeof(*link), GFP_KERNEL);
@@ -1982,11 +1976,7 @@ static dev_link_t *wl3501_attach(void)
 
 	/* Interrupt setup */
 	link->irq.Attributes	= IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1	= IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	link->irq.IRQInfo2	= wl3501_irq_mask;
-	if (wl3501_irq_list[0] != -1)
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << wl3501_irq_list[i];
+	link->irq.IRQInfo1	= IRQ_LEVEL_ID;
 	link->irq.Handler = wl3501_interrupt;
 
 	/* General socket configuration */
@@ -2273,8 +2263,6 @@ static void __exit wl3501_exit_module(void)
 module_init(wl3501_init_module);
 module_exit(wl3501_exit_module);
 
-module_param(wl3501_irq_mask, uint, 0);
-module_param_array(wl3501_irq_list, int, NULL, 0);
 MODULE_AUTHOR("Fox Chen <mhchen@golf.ccl.itri.org.tw>, "
 	      "Arnaldo Carvalho de Melo <acme@conectiva.com.br>,"
 	      "Gustavo Niemeyer <niemeyer@conectiva.com>");

drivers/parport/parport_cs.c

@@ -66,11 +66,6 @@ MODULE_LICENSE("Dual MPL/GPL");
 
 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 
-/* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 INT_MODULE_PARM(epp_mode, 1);
 
 #ifdef PCMCIA_DEBUG
@@ -116,7 +111,7 @@ static dev_link_t *parport_attach(void)
     parport_info_t *info;
     dev_link_t *link;
     client_reg_t client_reg;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "parport_attach()\n");
 
@@ -129,12 +124,7 @@ static dev_link_t *parport_attach(void)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;

drivers/scsi/pcmcia/aha152x_stub.c

@@ -70,10 +70,6 @@ static char *version =
 
 /* Parameters that can be set with 'insmod' */
 
-/* Bit map of interrupts to choose from */
-static u_int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
 /* SCSI bus setup options */
 static int host_id = 7;
 static int reconnect = 1;
@@ -82,8 +78,6 @@ static int synchronous = 1;
 static int reset_delay = 100;
 static int ext_trans = 0;
 
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
 module_param(host_id, int, 0);
 module_param(reconnect, int, 0);
 module_param(parity, int, 0);
@@ -116,7 +110,7 @@ static dev_link_t *aha152x_attach(void)
     scsi_info_t *info;
     client_reg_t client_reg;
     dev_link_t *link;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "aha152x_attach()\n");
 
@@ -130,12 +124,7 @@ static dev_link_t *aha152x_attach(void)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 10;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;

drivers/scsi/pcmcia/fdomain_stub.c

@@ -61,12 +61,6 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
 MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
 MODULE_LICENSE("Dual MPL/GPL");
 
-/* Bit map of interrupts to choose from */
-static int irq_mask = 0xdeb8;
-module_param(irq_mask, int, 0);
-static int irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-
 #ifdef PCMCIA_DEBUG
 static int pc_debug = PCMCIA_DEBUG;
 module_param(pc_debug, int, 0);
@@ -103,7 +97,7 @@ static dev_link_t *fdomain_attach(void)
     scsi_info_t *info;
     client_reg_t client_reg;
     dev_link_t *link;
-    int i, ret;
+    int ret;
     
     DEBUG(0, "fdomain_attach()\n");
 
@@ -116,12 +110,7 @@ static dev_link_t *fdomain_attach(void)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 10;
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
-    if (irq_list[0] == -1)
-	link->irq.IRQInfo2 = irq_mask;
-    else
-	for (i = 0; i < 4; i++)
-	    link->irq.IRQInfo2 |= 1 << irq_list[i];
+    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;

drivers/scsi/pcmcia/nsp_cs.c

@@ -72,14 +72,6 @@ MODULE_LICENSE("GPL");
 /*====================================================================*/
 /* Parameters that can be set with 'insmod' */
 
-static unsigned int irq_mask = 0xffff;
-module_param(irq_mask, int, 0);
-MODULE_PARM_DESC(irq_mask, "IRQ mask bits (default: 0xffff)");
-
-static int       irq_list[4] = { -1 };
-module_param_array(irq_list, int, NULL, 0);
-MODULE_PARM_DESC(irq_list, "Use specified IRQ number. (default: auto select)");
-
 static int       nsp_burst_mode = BURST_MEM32;
 module_param(nsp_burst_mode, int, 0);
 MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))");
@@ -1625,7 +1617,7 @@ static dev_link_t *nsp_cs_attach(void)
 	scsi_info_t  *info;
 	client_reg_t  client_reg;
 	dev_link_t   *link;
-	int	      ret, i;
+	int	      ret;
 	nsp_hw_data  *data = &nsp_data_base;
 
 	nsp_dbg(NSP_DEBUG_INIT, "in");
@@ -1647,14 +1639,7 @@ static dev_link_t *nsp_cs_attach(void)
 
 	/* Interrupt setup */
 	link->irq.Attributes	 = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1	 = IRQ_INFO2_VALID    | IRQ_LEVEL_ID;
-	if (irq_list[0] == -1) {
-		link->irq.IRQInfo2 = irq_mask;
-	} else {
-		for (i = 0; i < 4; i++) {
-			link->irq.IRQInfo2 |= BIT(irq_list[i]);
-		}
-	}
+	link->irq.IRQInfo1	 = IRQ_LEVEL_ID;
 
 	/* Interrupt handler */
 	link->irq.Handler	 = &nspintr;

drivers/scsi/pcmcia/qlogic_stub.c

@@ -93,17 +93,6 @@ static Scsi_Host_Template qlogicfas_driver_template = {
 
 /*====================================================================*/
 
-/* Parameters that can be set with 'insmod' */
-
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xdeb8;
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, int, 0);
-module_param_array(irq_list, int, NULL, 0);
-
-/*====================================================================*/
-
 typedef struct scsi_info_t {
 	dev_link_t link;
 	dev_node_t node;
@@ -182,7 +171,7 @@ static dev_link_t *qlogic_attach(void)
 	scsi_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	DEBUG(0, "qlogic_attach()\n");
 
@@ -197,12 +186,7 @@ static dev_link_t *qlogic_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.Vcc = 50;
 	link->conf.IntType = INT_MEMORY_AND_IO;

drivers/scsi/pcmcia/sym53c500_cs.c

@@ -92,19 +92,6 @@ static char *version =
 
 /* ================================================================== */
 
-/* Parameters that can be set with 'insmod' */
-
-/* Bit map of interrupts to choose from */
-static unsigned int irq_mask = 0xdeb8;	/* 3-5, 7, 9-12, 14, 15 */
-static int irq_list[4] = { -1 };
-
-module_param(irq_mask, int, 0);
-MODULE_PARM_DESC(irq_mask, "IRQ mask bits (default: 0xdeb8)");
-module_param_array(irq_list, int, NULL, 0);
-MODULE_PARM_DESC(irq_list, "Comma-separated list of up to 4 IRQs to try (default: auto select).");
-
-/* ================================================================== */
-
 #define SYNC_MODE 0 		/* Synchronous transfer mode */
 
 /* Default configuration */
@@ -965,7 +952,7 @@ SYM53C500_attach(void)
 	struct scsi_info_t *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	DEBUG(0, "SYM53C500_attach()\n");
 
@@ -980,12 +967,7 @@ SYM53C500_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.Vcc = 50;
 	link->conf.IntType = INT_MEMORY_AND_IO;

drivers/serial/serial_cs.c

@@ -68,18 +68,11 @@ static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
 
 /* Parameters that can be set with 'insmod' */
 
-/* Bit map of interrupts to choose from */
-static u_int irq_mask = 0xdeb8;
-static int irq_list[4];
-static unsigned int irq_list_count;
-
 /* Enable the speaker? */
 static int do_sound = 1;
 /* Skip strict UART tests? */
 static int buggy_uart;
 
-module_param(irq_mask, uint, 0444);
-module_param_array(irq_list, int, &irq_list_count, 0444);
 module_param(do_sound, int, 0444);
 module_param(buggy_uart, int, 0444);
 
@@ -205,7 +198,7 @@ static dev_link_t *serial_attach(void)
 	struct serial_info *info;
 	client_reg_t client_reg;
 	dev_link_t *link;
-	int i, ret;
+	int ret;
 
 	DEBUG(0, "serial_attach()\n");
 
@@ -220,12 +213,7 @@ static dev_link_t *serial_attach(void)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	if (irq_list_count == 0)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < irq_list_count; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;

sound/pcmcia/pdaudiocf/pdaudiocf.c

@@ -42,8 +42,6 @@ MODULE_SUPPORTED_DEVICE("{{Sound Core," CARD_NAME "}}");
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;	/* Enable switches */
-static unsigned int irq_mask = 0xffff;
-static int irq_list[4] = { -1 };
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
@@ -51,11 +49,6 @@ module_param_array(id, charp, NULL, 0444);
 MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-module_param(irq_mask, int, 0444);
-MODULE_PARM_DESC(irq_mask, "IRQ bitmask for " CARD_NAME " soundcard.");
-module_param_array(irq_list, int, NULL, 0444);
-MODULE_PARM_DESC(irq_list, "List of Available interrupts for " CARD_NAME " soundcard.");
- 
 
 /*
  */
@@ -164,12 +157,7 @@ static dev_link_t *snd_pdacf_attach(void)
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT | IRQ_FORCED_PULSE;
 	// link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID /* | IRQ_LEVEL_ID */;
-	if (irq_list[0] == -1)
-		link->irq.IRQInfo2 = irq_mask;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.IRQInfo1 = 0 /* | IRQ_LEVEL_ID */;
 	link->irq.Handler = pdacf_interrupt;
 	link->irq.Instance = pdacf;
 	link->conf.Attributes = CONF_ENABLE_IRQ;

sound/pcmcia/vx/vx_entry.c

@@ -157,12 +157,7 @@ dev_link_t *snd_vxpocket_attach(struct snd_vxp_entry *hw)
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
 	// link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
-	if (hw->irq_list[0] == -1)
-		link->irq.IRQInfo2 = *hw->irq_mask_p;
-	else
-		for (i = 0; i < 4; i++)
-			link->irq.IRQInfo2 |= 1 << hw->irq_list[i];
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = &snd_vx_irq_handler;
 	link->irq.Instance = chip;
 

sound/pcmcia/vx/vxpocket.c

@@ -55,8 +55,6 @@ MODULE_SUPPORTED_DEVICE("{{Digigram," CARD_NAME "}}");
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;	/* Enable switches */
-static unsigned int irq_mask = 0xffff;
-static int irq_list[4] = { -1 };
 static int ibl[SNDRV_CARDS];
 
 module_param_array(index, int, NULL, 0444);
@@ -65,10 +63,6 @@ module_param_array(id, charp, NULL, 0444);
 MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
-module_param(irq_mask, int, 0444);
-MODULE_PARM_DESC(irq_mask, "IRQ bitmask for " CARD_NAME " soundcard.");
-module_param_array(irq_list, int, NULL, 0444);
-MODULE_PARM_DESC(irq_list, "List of Available interrupts for " CARD_NAME " soundcard.");
 module_param_array(ibl, int, NULL, 0444);
 MODULE_PARM_DESC(ibl, "Capture IBL size for " CARD_NAME " soundcard.");
  
@@ -123,8 +117,6 @@ static struct snd_vxp_entry hw_entry = {
 	.index_table = index,
 	.id_table = id,
 	.enable_table = enable,
-	.irq_mask_p = &irq_mask,
-	.irq_list = irq_list,
 	.ibl = ibl,
 
 	/* h/w config */

sound/pcmcia/vx/vxpocket.h

@@ -35,8 +35,6 @@ struct snd_vxp_entry {
 	int *index_table;
 	char **id_table;
 	int *enable_table;
-	unsigned int *irq_mask_p;
-	int *irq_list;
 	int *ibl;
 
 	/* h/w config */