Commit e4552f51 authored by Ron Mercer's avatar Ron Mercer Committed by David S. Miller

qlge: Add support for varied pcie function numbers.

Currently we support only PCIe NIC functions zero and one, and FCoE
functions as 3 and 4. Future configurations can mix these up in any
fashion.
This patch removes the 0-1 dependancy and allows usage of any of the 4
functions. We also find the alternate NIC function (if exist) and
determine our port number based on the comparison of the two functions:
Lower function number gets first port, higher function gets second port.
Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 542512e4
......@@ -65,6 +65,17 @@
#define DB_PAGE_SIZE 4096
/* MPI test register definitions. This register
* is used for determining alternate NIC function's
* PCI->func number.
*/
enum {
MPI_TEST_FUNC_PORT_CFG = 0x1002,
MPI_TEST_NIC1_FUNC_SHIFT = 1,
MPI_TEST_NIC2_FUNC_SHIFT = 5,
MPI_TEST_NIC_FUNC_MASK = 0x00000007,
};
/*
* Processor Address Register (PROC_ADDR) bit definitions.
*/
......@@ -1432,6 +1443,8 @@ struct ql_adapter {
u32 chip_rev_id;
u32 fw_rev_id;
u32 func; /* PCI function for this adapter */
u32 alt_func; /* PCI function for alternate adapter */
u32 port; /* Port number this adapter */
spinlock_t adapter_lock;
spinlock_t hw_lock;
......@@ -1581,6 +1594,7 @@ void ql_mpi_idc_work(struct work_struct *work);
void ql_mpi_port_cfg_work(struct work_struct *work);
int ql_mb_get_fw_state(struct ql_adapter *qdev);
int ql_cam_route_initialize(struct ql_adapter *qdev);
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
#if 1
......
......@@ -680,7 +680,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
/* Get flash offset for function and adjust
* for dword access.
*/
if (!qdev->func)
if (!qdev->port)
offset = FUNC0_FLASH_OFFSET / sizeof(u32);
else
offset = FUNC1_FLASH_OFFSET / sizeof(u32);
......@@ -744,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
/* Second function's parameters follow the first
* function's.
*/
if (qdev->func)
if (qdev->port)
offset = size;
if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
......@@ -3220,9 +3220,10 @@ static void ql_display_dev_info(struct net_device *ndev)
struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
QPRINTK(qdev, PROBE, INFO,
"Function #%d, NIC Roll %d, NIC Rev = %d, "
"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
"XG Roll = %d, XG Rev = %d.\n",
qdev->func,
qdev->port,
qdev->chip_rev_id & 0x0000000f,
qdev->chip_rev_id >> 4 & 0x0000000f,
qdev->chip_rev_id >> 8 & 0x0000000f,
......@@ -3677,12 +3678,53 @@ static struct nic_operations qla8000_nic_ops = {
.port_initialize = ql_8000_port_initialize,
};
/* Find the pcie function number for the other NIC
* on this chip. Since both NIC functions share a
* common firmware we have the lowest enabled function
* do any common work. Examples would be resetting
* after a fatal firmware error, or doing a firmware
* coredump.
*/
static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
{
int status = 0;
u32 temp;
u32 nic_func1, nic_func2;
status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
&temp);
if (status)
return status;
nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
MPI_TEST_NIC_FUNC_MASK);
nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
MPI_TEST_NIC_FUNC_MASK);
if (qdev->func == nic_func1)
qdev->alt_func = nic_func2;
else if (qdev->func == nic_func2)
qdev->alt_func = nic_func1;
else
status = -EIO;
return status;
}
static void ql_get_board_info(struct ql_adapter *qdev)
static int ql_get_board_info(struct ql_adapter *qdev)
{
int status;
qdev->func =
(ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
if (qdev->func) {
if (qdev->func > 3)
return -EIO;
status = ql_get_alt_pcie_func(qdev);
if (status)
return status;
qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
if (qdev->port) {
qdev->xg_sem_mask = SEM_XGMAC1_MASK;
qdev->port_link_up = STS_PL1;
qdev->port_init = STS_PI1;
......@@ -3701,6 +3743,7 @@ static void ql_get_board_info(struct ql_adapter *qdev)
qdev->nic_ops = &qla8012_nic_ops;
else if (qdev->device_id == QLGE_DEVICE_ID_8000)
qdev->nic_ops = &qla8000_nic_ops;
return status;
}
static void ql_release_all(struct pci_dev *pdev)
......@@ -3795,7 +3838,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
qdev->ndev = ndev;
qdev->pdev = pdev;
ql_get_board_info(qdev);
err = ql_get_board_info(qdev);
if (err) {
dev_err(&pdev->dev, "Register access failed.\n");
err = -EIO;
goto err_out;
}
qdev->msg_enable = netif_msg_init(debug, default_msg);
spin_lock_init(&qdev->hw_lock);
spin_lock_init(&qdev->stats_lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment