dt-bindings: serial: add documentation for the SiFive UART driver

Add DT binding documentation for the Linux driver for the SiFive
asynchronous serial IP block.

This revision incorporates changes based on feedback from Rob
Herring <robh@kernel.org>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/serial/sifive-serial.txt

+SiFive asynchronous serial interface (UART)
+
+Required properties:
+
+- compatible: should be something similar to
+	      "sifive,<chip>-uart" for the UART as integrated
+	      on a particular chip, and "sifive,uart<version>" for the
+	      general UART IP block programming model.	Supported
+	      compatible strings as of the date of this writing are:
+	      "sifive,fu540-c000-uart" for the SiFive UART v0 as
+	      integrated onto the SiFive FU540 chip, or "sifive,uart0"
+	      for the SiFive UART v0 IP block with no chip integration
+	      tweaks (if any)
+- reg: address and length of the register space
+- interrupts: Should contain the UART interrupt identifier
+- clocks: Should contain a clock identifier for the UART's parent clock
+
+
+UART HDL that corresponds to the IP block version numbers can be found
+here:
+
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
+
+
+Example:
+
+uart0: serial@10010000 {
+	compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+	interrupt-parent = <&plic0>;
+	interrupts = <80>;
+	reg = <0x0 0x10010000 0x0 0x1000>;
+	clocks = <&prci PRCI_CLK_TLCLK>;
+};