Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for Marvell SD8787 Wifi/BT chip
   - Improve UHS support for SDIO
   - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode
   - Detect Auto BKOPS enable bit
   - Export eMMC device lifetime information through sysfs
   - First take to slim down the public mmc headers to avoid abuse
   - Re-factoring of the mmc block device driver to prepare for blkmq
   - Cleanup code for the mmc block device driver
   - Clarify and cleanup code dealing with data requests
   - Cleanup some code by converting to ida_simple_ functions
   - Cleanup code dealing with card quirks
   - Cleanup private and public mmc header files

  MMC host:
   - Don't rely on public mmc headers to include non-mmc related headers
   - meson: Add support for eMMC HS400 mode
   - meson: Various cleanups and improvements
   - omap_hsmmc: Use the proper provided busy timeout from the core
   - sunxi: Enable new timings for the A64 MMC controllers
   - sunxi: Improvements for clock management
   - tmio: Improvements for SDIO interrupts
   - mxs-mmc: Add CMD23 support
   - sdhci-msm: Enable HS400 enhanced strobe mode support
   - sdhci-msm: Correct HS400 tuning sequence
   - sdhci-acpi: Support deferred probe
   - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD
   - mediatek: Correct the implementation of card busy detection
   - dw_mmc: Initial support for ZX mmc controller
   - sh_mobile_sdhi: Enable support for eMMC HS200 mode
   - sh_mmcif: Various cleanups and improvements"

* tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits)
  mmc: core: add mmc prefix for blk_fixups
  mmc: core: move all quirks together into quirks.h
  mmc: core: improve the quirks for sdio devices
  mmc: core: move some sdio IDs out of quirks file
  mmc: core: change quirks.c to be a header file
  mmc: sdhci-cadence: fix bit shift of read data from PHY port
  mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support
  mmc: MAN_BKOPS_EN inverse debug message logic
  mmc: meson-gx: add support for HS400 mode
  mmc: meson-gx: remove unneeded checks in remove
  mmc: meson-gx: reduce bounce buffer size
  mmc: meson-gx: set max block count and request size
  mmc: meson-gx: improve interrupt handling
  mmc: meson-gx: improve meson_mmc_irq_thread
  mmc: meson-gx: improve meson_mmc_clk_set
  mmc: meson-gx: minor improvements in meson_mmc_set_ios
  mmc: meson: Assign the minimum clk rate as close to 400KHz as possible
  mmc: core: start to break apart mmc_start_areq()
  mmc: block: respect bool returned from blk_end_request()
  mmc: block: return errorcode from mmc_sd_num_wr_blocks()
  ...

Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt

@@ -17,7 +17,7 @@ Required properties:
 	"core" - Main peripheral bus clock
 	"clkin0" - Parent clock of internal mux
 	"clkin1" - Other parent clock of internal mux
-  The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the
+  The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
   clock rate requested by the MMC core.
 
 Example:

Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt

+* Marvell SD8787 power sequence provider
+
+Required properties:
+- compatible: must be "mmc-pwrseq-sd8787".
+- powerdown-gpios: contains a power down GPIO specifier with the
+		   default active state
+- reset-gpios: contains a reset GPIO specifier with the default
+		   active state
+
+Example:
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+	}

Documentation/devicetree/bindings/mmc/mmc.txt

@@ -40,6 +40,7 @@ Optional properties:
 - cap-mmc-hw-reset: eMMC hardware reset is supported
 - cap-sdio-irq: enable SDIO IRQ signalling on this interface
 - full-pwr-cycle: full power cycle of the card is supported
+- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported
 - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
 - mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
 - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported

Documentation/devicetree/bindings/mmc/sdhci-st.txt

@@ -38,7 +38,7 @@ Optional properties:
 - bus-width:		Number of data lines.
 			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
 
-- max-frequency:	Can be 200MHz, 100Mz or 50MHz (default) and used for
+- max-frequency:	Can be 200MHz, 100MHz or 50MHz (default) and used for
 			configuring the CCONFIG3 in the mmcss.
 			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
 

Documentation/devicetree/bindings/mmc/sdhci.txt

@@ -5,7 +5,7 @@ host controllers refer to the mmc[1] bindings.
 
 Optional properties:
 - sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
-  property corresponds to the bits in the sdhci capabilty register. If the bit
+  property corresponds to the bits in the sdhci capability register. If the bit
   is on in the mask then the bit is incorrect in the register and should be
   turned off, before applying sdhci-caps.
 - sdhci-caps: The sdhci capabilities register is incorrect. This 64bit

Documentation/devicetree/bindings/mmc/sunxi-mmc.txt

@@ -13,6 +13,7 @@ Required properties:
    * "allwinner,sun5i-a13-mmc"
    * "allwinner,sun7i-a20-mmc"
    * "allwinner,sun9i-a80-mmc"
+   * "allwinner,sun50i-a64-emmc"
    * "allwinner,sun50i-a64-mmc"
  - reg : mmc controller base registers
  - clocks : a list with 4 phandle + clock specifier pairs

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -16,7 +16,7 @@ Required Properties:
   each child-node representing a supported slot. There should be atleast one
   child node representing a card slot. The name of the child node representing
   the slot is recommended to be slot@n where n is the unique number of the slot
-  connnected to the controller. The following are optional properties which
+  connected to the controller. The following are optional properties which
   can be included in the slot child node.
 
 	* reg: specifies the physical slot number. The valid values of this
@@ -75,6 +75,17 @@ Optional properties:
 * card-detect-delay: Delay in milli-seconds before detecting card after card
   insert event. The default value is 0.
 
+* data-addr: Override fifo address with value provided by DT. The default FIFO reg
+  offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
+  driver. If the controller does not follow this rule, please use this property
+  to set fifo address in device tree.
+
+* fifo-watermark-aligned: Data done irq is expected if data length is less than
+  watermark in PIO mode. But fifo watermark is requested to be aligned with data
+  length in some SoC so that TX/RX irq can be generated with data done irq. Add this
+  watermark quirk to mark this requirement and force fifo watermark setting
+  accordingly.
+
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
   specified we'll defer probe until we can find this regulator.
 
@@ -102,6 +113,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		data-addr = <0x200>;
+		fifo-watermark-aligned;
 		resets = <&rst 20>;
 		reset-names = "reset";
 	};

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -25,6 +25,19 @@ Required properties:
 		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
 		"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
 
+- clocks: Most controllers only have 1 clock source per channel. However, on
+	  some variations of this controller, the internal card detection
+	  logic that exists in this controller is sectioned off to be run by a
+	  separate second clock source to allow the main core clock to be turned
+	  off to save power.
+	  If 2 clocks are specified by the hardware, you must name them as
+	  "core" and "cd". If the controller only has 1 clock, naming is not
+	  required.
+	  Below is the number clocks for each supported SoC:
+	   1: SH73A0, R8A73A4, R8A7740, R8A7778, R8A7779, R8A7790
+	      R8A7791, R8A7792, R8A7793, R8A7794, R8A7795, R8A7796
+	   2: R7S72100
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
 - pinctrl-names: should be "default", "state_uhs"

Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

+* ZTE specific extensions to the Synopsys Designware Mobile Storage
+  Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the ZTE specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- "zte,zx296718-dw-mshc": for ZX SoCs
+
+Example:
+
+	mmc1: mmc@1110000 {
+		compatible = "zte,zx296718-dw-mshc";
+		reg = <0x01110000 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		fifo-depth = <32>;
+		data-addr = <0x200>;
+		fifo-watermark-aligned;
+		bus-width = <4>;
+		clock-frequency = <50000000>;
+		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
+		clock-names = "biu", "ciu";
+		num-slots = <1>;
+		max-frequency = <50000000>;
+		cap-sdio-irq;
+		cap-sd-highspeed;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt

-Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
+Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices
 ------
 
 This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
@@ -8,6 +8,7 @@ connects the device to the system.
 Required properties:
 
   - compatible : should be one of the following:
+	* "marvell,sd8787"
 	* "marvell,sd8897"
 	* "marvell,sd8997"
 	* "pci11ab,2b42"
@@ -34,6 +35,9 @@ Optional properties:
 		 so that the wifi chip can wakeup host platform under certain condition.
 		 during system resume, the irq will be disabled to make sure
 		 unnecessary interrupt is not received.
+  - vmmc-supply: a phandle of a regulator, supplying VCC to the card
+  - mmc-pwrseq:  phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+		 for documentation of MMC power sequence bindings.
 
 Example:
 
@@ -46,6 +50,7 @@ so that firmware can wakeup host using this device side pin.
 &mmc3 {
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	cap-power-off-card;
 	keep-power-in-suspend;

MAINTAINERS

@@ -10894,7 +10894,6 @@ SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
 M:	Jaehoon Chung <jh80.chung@samsung.com>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
-F:	include/linux/mmc/dw_mmc.h
 F:	drivers/mmc/host/dw_mmc*
 
 SYSTEM TRACE MODULE CLASS

arch/arm/mach-davinci/board-da850-evm.c

@@ -18,6 +18,7 @@
 #include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
 #include <linux/platform_data/pca953x.h>

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -25,6 +25,7 @@
 #include <linux/videodev2.h>
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
+#include <linux/leds.h>
 
 #include <media/i2c/tvp514x.h>
 

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -25,6 +25,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/i2c-davinci.h>

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio-davinci.h>

arch/arm/mach-pxa/balloon3.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
 #include <linux/fb.h>

arch/arm/mach-pxa/colibri-pxa270-income.c

@@ -17,6 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>

arch/arm/mach-pxa/corgi.c

@@ -19,6 +19,7 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pm.h>

arch/arm/mach-pxa/trizeps4.c

@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>

arch/arm/mach-pxa/vpac270.c

@@ -15,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/mtd.h>

arch/arm/mach-pxa/zeus.c

@@ -13,6 +13,7 @@
 
 #include <linux/cpufreq.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/gpio.h>

arch/arm/mach-pxa/zylonite.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>

arch/mips/alchemy/devboards/db1300.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/interrupt.h>
 #include <linux/ata_platform.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>

arch/sh/boot/romimage/mmcif-sh7724.c

@@ -9,7 +9,6 @@
  */
 
 #include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
 #include <mach/romimage.h>
 
 #define MMCIF_BASE      (void __iomem *)0xa4ca0000
@@ -22,6 +21,13 @@
 #define HIZCRC		0xa405015c
 #define DRVCRA		0xa405018a
 
+enum {
+	MMCIF_PROGRESS_ENTER,
+	MMCIF_PROGRESS_INIT,
+	MMCIF_PROGRESS_LOAD,
+	MMCIF_PROGRESS_DONE
+};
+
 /* SH7724 specific MMCIF loader
  *
  * loads the romImage from an MMC card starting from block 512
@@ -30,7 +36,7 @@
  */
 asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 {
-	mmcif_update_progress(MMC_PROGRESS_ENTER);
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
 
 	/* enable clock to the MMCIF hardware block */
 	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
@@ -53,12 +59,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 	/* high drive capability for MMC pins */
 	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
 
-	mmcif_update_progress(MMC_PROGRESS_INIT);
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
 
 	/* setup MMCIF hardware */
 	sh_mmcif_boot_init(MMCIF_BASE);
 
-	mmcif_update_progress(MMC_PROGRESS_LOAD);
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
 
 	/* load kernel via MMCIF interface */
 	sh_mmcif_boot_do_read(MMCIF_BASE, 512,
@@ -68,5 +74,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 	/* disable clock to the MMCIF hardware block */
 	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
 
-	mmcif_update_progress(MMC_PROGRESS_DONE);
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
 }

drivers/mmc/core/Kconfig

@@ -12,6 +12,16 @@ config PWRSEQ_EMMC
 	  This driver can also be built as a module. If so, the module
 	  will be called pwrseq_emmc.
 
+config PWRSEQ_SD8787
+	tristate "HW reset support for SD8787 BT + Wifi module"
+	depends on OF && (MWIFIEX || BT_MRVL_SDIO)
+	help
+	  This selects hardware reset support for the SD8787 BT + Wifi
+	  module. By default this option is set to n.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pwrseq_sd8787.
+
 config PWRSEQ_SIMPLE
 	tristate "Simple HW reset support for MMC"
 	default y

drivers/mmc/core/Makefile

@@ -7,9 +7,10 @@ mmc_core-y			:= core.o bus.o host.o \
 				   mmc.o mmc_ops.o sd.o sd_ops.o \
 				   sdio.o sdio_ops.o sdio_bus.o \
 				   sdio_cis.o sdio_io.o sdio_irq.o \
-				   quirks.o slot-gpio.o
+				   slot-gpio.o
 mmc_core-$(CONFIG_OF)		+= pwrseq.o
 obj-$(CONFIG_PWRSEQ_SIMPLE)	+= pwrseq_simple.o
+obj-$(CONFIG_PWRSEQ_SD8787)	+= pwrseq_sd8787.o
 obj-$(CONFIG_PWRSEQ_EMMC)	+= pwrseq_emmc.o
 mmc_core-$(CONFIG_DEBUG_FS)	+= debugfs.o
 obj-$(CONFIG_MMC_BLOCK)		+= mmc_block.o

drivers/mmc/core/block.h

-int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req);
+#ifndef _MMC_CORE_BLOCK_H
+#define _MMC_CORE_BLOCK_H
+
+struct mmc_queue;
+struct request;
+
+void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req);
+
+#endif

drivers/mmc/core/bus.c

@@ -23,6 +23,8 @@
 #include <linux/mmc/host.h>
 
 #include "core.h"
+#include "card.h"
+#include "host.h"
 #include "sdio_cis.h"
 #include "bus.h"
 

drivers/mmc/core/bus.h

@@ -11,6 +11,11 @@
 #ifndef _MMC_CORE_BUS_H
 #define _MMC_CORE_BUS_H
 
+#include <linux/device.h>
+
+struct mmc_host;
+struct mmc_card;
+
 #define MMC_DEV_ATTR(name, fmt, args...)					\
 static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf)	\
 {										\
@@ -27,5 +32,14 @@ void mmc_remove_card(struct mmc_card *card);
 int mmc_register_bus(void);
 void mmc_unregister_bus(void);
 
-#endif
+struct mmc_driver {
+	struct device_driver drv;
+	int (*probe)(struct mmc_card *card);
+	void (*remove)(struct mmc_card *card);
+	void (*shutdown)(struct mmc_card *card);
+};
 
+int mmc_register_driver(struct mmc_driver *drv);
+void mmc_unregister_driver(struct mmc_driver *drv);
+
+#endif

drivers/mmc/core/card.h

+/*
+ * Private header for the mmc subsystem
+ *
+ * Copyright (C) 2016 Linaro Ltd
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef _MMC_CORE_CARD_H
+#define _MMC_CORE_CARD_H
+
+#include <linux/mmc/card.h>
+
+#define mmc_card_name(c)	((c)->cid.prod_name)
+#define mmc_card_id(c)		(dev_name(&(c)->dev))
+#define mmc_dev_to_card(d)	container_of(d, struct mmc_card, dev)
+
+/* Card states */
+#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
+#define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
+#define MMC_STATE_BLOCKADDR	(1<<2)		/* card uses block-addressing */
+#define MMC_CARD_SDXC		(1<<3)		/* card is SDXC */
+#define MMC_CARD_REMOVED	(1<<4)		/* card has been removed */
+#define MMC_STATE_DOING_BKOPS	(1<<5)		/* card is doing BKOPS */
+#define MMC_STATE_SUSPENDED	(1<<6)		/* card is suspended */
+
+#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
+#define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
+#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
+#define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_doing_bkops(c)	((c)->state & MMC_STATE_DOING_BKOPS)
+#define mmc_card_suspended(c)	((c)->state & MMC_STATE_SUSPENDED)
+
+#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
+#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_doing_bkops(c)	((c)->state |= MMC_STATE_DOING_BKOPS)
+#define mmc_card_clr_doing_bkops(c)	((c)->state &= ~MMC_STATE_DOING_BKOPS)
+#define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED)
+#define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED)
+
+/*
+ * The world is not perfect and supplies us with broken mmc/sdio devices.
+ * For at least some of these bugs we need a work-around.
+ */
+struct mmc_fixup {
+	/* CID-specific fields. */
+	const char *name;
+
+	/* Valid revision range */
+	u64 rev_start, rev_end;
+
+	unsigned int manfid;
+	unsigned short oemid;
+
+	/* SDIO-specific fields. You can use SDIO_ANY_ID here of course */
+	u16 cis_vendor, cis_device;
+
+	/* for MMC cards */
+	unsigned int ext_csd_rev;
+
+	void (*vendor_fixup)(struct mmc_card *card, int data);
+	int data;
+};
+
+#define CID_MANFID_ANY (-1u)
+#define CID_OEMID_ANY ((unsigned short) -1)
+#define CID_NAME_ANY (NULL)
+
+#define EXT_CSD_REV_ANY (-1u)
+
+#define CID_MANFID_SANDISK      0x2
+#define CID_MANFID_TOSHIBA      0x11
+#define CID_MANFID_MICRON       0x13
+#define CID_MANFID_SAMSUNG      0x15
+#define CID_MANFID_KINGSTON     0x70
+#define CID_MANFID_HYNIX	0x90
+
+#define END_FIXUP { NULL }
+
+#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		   _cis_vendor, _cis_device,				\
+		   _fixup, _data, _ext_csd_rev)				\
+	{						\
+		.name = (_name),			\
+		.manfid = (_manfid),			\
+		.oemid = (_oemid),			\
+		.rev_start = (_rev_start),		\
+		.rev_end = (_rev_end),			\
+		.cis_vendor = (_cis_vendor),		\
+		.cis_device = (_cis_device),		\
+		.vendor_fixup = (_fixup),		\
+		.data = (_data),			\
+		.ext_csd_rev = (_ext_csd_rev),		\
+	}
+
+#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		      _fixup, _data, _ext_csd_rev)			\
+	_FIXUP_EXT(_name, _manfid,					\
+		   _oemid, _rev_start, _rev_end,			\
+		   SDIO_ANY_ID, SDIO_ANY_ID,				\
+		   _fixup, _data, _ext_csd_rev)				\
+
+#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \
+	MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data,	\
+		      EXT_CSD_REV_ANY)
+
+#define MMC_FIXUP_EXT_CSD_REV(_name, _manfid, _oemid, _fixup, _data,	\
+			      _ext_csd_rev)				\
+	MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data,	\
+		      _ext_csd_rev)
+
+#define SDIO_FIXUP(_vendor, _device, _fixup, _data)			\
+	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY,			\
+		    CID_OEMID_ANY, 0, -1ull,				\
+		   _vendor, _device,					\
+		   _fixup, _data, EXT_CSD_REV_ANY)			\
+
+#define cid_rev(hwrev, fwrev, year, month)	\
+	(((u64) hwrev) << 40 |			\
+	 ((u64) fwrev) << 32 |			\
+	 ((u64) year) << 16 |			\
+	 ((u64) month))
+
+#define cid_rev_card(card)			\
+	cid_rev(card->cid.hwrev,		\
+		    card->cid.fwrev,		\
+		    card->cid.year,		\
+		    card->cid.month)
+
+/*
+ * Unconditionally quirk add/remove.
+ */
+static inline void __maybe_unused add_quirk(struct mmc_card *card, int data)
+{
+	card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
+{
+	card->quirks &= ~data;
+}
+
+/*
+ * Quirk add/remove for MMC products.
+ */
+static inline void __maybe_unused add_quirk_mmc(struct mmc_card *card, int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_mmc(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks &= ~data;
+}
+
+/*
+ * Quirk add/remove for SD products.
+ */
+static inline void __maybe_unused add_quirk_sd(struct mmc_card *card, int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_sd(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks &= ~data;
+}
+
+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LENIENT_FN0;
+}
+
+static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+}
+
+static inline int mmc_card_disable_cd(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_DISABLE_CD;
+}
+
+static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
+}
+
+static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
+}
+
+static inline int mmc_card_long_read_time(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LONG_READ_TIME;
+}
+
+static inline int mmc_card_broken_irq_polling(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING;
+}
+
+static inline int mmc_card_broken_hpi(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_HPI;
+}
+
+#endif

drivers/mmc/core/core.c

@@ -40,6 +40,7 @@
 #include <trace/events/mmc.h>
 
 #include "core.h"
+#include "card.h"
 #include "bus.h"
 #include "host.h"
 #include "sdio_bus.h"
@@ -630,10 +631,41 @@ static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
 }
 
 /**
- *	mmc_start_req - start a non-blocking request
+ * mmc_finalize_areq() - finalize an asynchronous request
+ * @host: MMC host to finalize any ongoing request on
+ *
+ * Returns the status of the ongoing asynchronous request, but
+ * MMC_BLK_SUCCESS if no request was going on.
+ */
+static enum mmc_blk_status mmc_finalize_areq(struct mmc_host *host)
+{
+	enum mmc_blk_status status;
+
+	if (!host->areq)
+		return MMC_BLK_SUCCESS;
+
+	status = mmc_wait_for_data_req_done(host, host->areq->mrq);
+	if (status == MMC_BLK_NEW_REQUEST)
+		return status;
+
+	/*
+	 * Check BKOPS urgency for each R1 response
+	 */
+	if (host->card && mmc_card_mmc(host->card) &&
+	    ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
+	     (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
+	    (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
+		mmc_start_bkops(host->card, true);
+	}
+
+	return status;
+}
+
+/**
+ *	mmc_start_areq - start an asynchronous request
  *	@host: MMC host to start command
- *	@areq: async request to start
- *	@error: out parameter returns 0 for success, otherwise non zero
+ *	@areq: asynchronous request to start
+ *	@ret_stat: out parameter for status
  *
  *	Start a new MMC custom command request for a host.
  *	If there is on ongoing async request wait for completion
@@ -645,11 +677,11 @@ static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
  *	return the completed request. If there is no ongoing request, NULL
  *	is returned without waiting. NULL is not an error condition.
  */
-struct mmc_async_req *mmc_start_req(struct mmc_host *host,
-				    struct mmc_async_req *areq,
-				    enum mmc_blk_status *ret_stat)
+struct mmc_async_req *mmc_start_areq(struct mmc_host *host,
+				     struct mmc_async_req *areq,
+				     enum mmc_blk_status *ret_stat)
 {
-	enum mmc_blk_status status = MMC_BLK_SUCCESS;
+	enum mmc_blk_status status;
 	int start_err = 0;
 	struct mmc_async_req *data = host->areq;
 
@@ -657,44 +689,25 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 	if (areq)
 		mmc_pre_req(host, areq->mrq);
 
-	if (host->areq) {
-		status = mmc_wait_for_data_req_done(host, host->areq->mrq);
-		if (status == MMC_BLK_NEW_REQUEST) {
-			if (ret_stat)
-				*ret_stat = status;
-			/*
-			 * The previous request was not completed,
-			 * nothing to return
-			 */
-			return NULL;
-		}
-		/*
-		 * Check BKOPS urgency for each R1 response
-		 */
-		if (host->card && mmc_card_mmc(host->card) &&
-		    ((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
-		     (mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
-		    (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
-
-			/* Cancel the prepared request */
-			if (areq)
-				mmc_post_req(host, areq->mrq, -EINVAL);
-
-			mmc_start_bkops(host->card, true);
+	/* Finalize previous request */
+	status = mmc_finalize_areq(host);
 
-			/* prepare the request again */
-			if (areq)
-				mmc_pre_req(host, areq->mrq);
-		}
+	/* The previous request is still going on... */
+	if (status == MMC_BLK_NEW_REQUEST) {
+		if (ret_stat)
+			*ret_stat = status;
+		return NULL;
 	}
 
+	/* Fine so far, start the new request! */
 	if (status == MMC_BLK_SUCCESS && areq)
 		start_err = __mmc_start_data_req(host, areq->mrq);
 
+	/* Postprocess the old request at this point */
 	if (host->areq)
 		mmc_post_req(host, host->areq->mrq, 0);
 
-	 /* Cancel a prepared request if it was not started. */
+	/* Cancel a prepared request if it was not started. */
 	if ((status != MMC_BLK_SUCCESS || start_err) && areq)
 		mmc_post_req(host, areq->mrq, -EINVAL);
 
@@ -707,7 +720,7 @@ struct mmc_async_req *mmc_start_req(struct mmc_host *host,
 		*ret_stat = status;
 	return data;
 }
-EXPORT_SYMBOL(mmc_start_req);
+EXPORT_SYMBOL(mmc_start_areq);
 
 /**
  *	mmc_wait_for_req - start a request and wait for completion
@@ -807,7 +820,7 @@ EXPORT_SYMBOL(mmc_interrupt_hpi);
  */
 int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries)
 {
-	struct mmc_request mrq = {NULL};
+	struct mmc_request mrq = {};
 
 	WARN_ON(!host->claimed);
 
@@ -1630,7 +1643,7 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 	return ocr;
 }
 
-int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
 {
 	int err = 0;
 	int old_signal_voltage = host->ios.signal_voltage;
@@ -1646,19 +1659,12 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
 
 }
 
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
+int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int err = 0;
 	u32 clock;
 
-	/*
-	 * Send CMD11 only if the request is to switch the card to
-	 * 1.8V signalling.
-	 */
-	if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
-		return __mmc_set_signal_voltage(host, signal_voltage);
-
 	/*
 	 * If we cannot switch voltages, return failure so the caller
 	 * can continue without UHS mode
@@ -1697,7 +1703,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
 	host->ios.clock = 0;
 	mmc_set_ios(host);
 
-	if (__mmc_set_signal_voltage(host, signal_voltage)) {
+	if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) {
 		/*
 		 * Voltages may not have been switched, but we've already
 		 * sent CMD11, so a power cycle is required anyway
@@ -1806,11 +1812,11 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
 	mmc_set_initial_state(host);
 
 	/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
-	if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
+	if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330))
 		dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
-	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
+	else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
 		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
-	else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
+	else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120))
 		dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
 
 	/*
@@ -2129,7 +2135,7 @@ static unsigned int mmc_erase_timeout(struct mmc_card *card,
 static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 			unsigned int to, unsigned int arg)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	unsigned int qty = 0, busy_timeout = 0;
 	bool use_r1b_resp = false;
 	unsigned long timeout;
@@ -2551,7 +2557,7 @@ EXPORT_SYMBOL(mmc_calc_max_discard);
 
 int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
 	    mmc_card_hs400(card) || mmc_card_hs400es(card))
@@ -2567,7 +2573,7 @@ EXPORT_SYMBOL(mmc_set_blocklen);
 int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
 			bool is_rel_write)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_SET_BLOCK_COUNT;
 	cmd.arg = blockcount & 0x0000FFFF;

drivers/mmc/core/core.h

@@ -12,6 +12,11 @@
 #define _MMC_CORE_CORE_H
 
 #include <linux/delay.h>
+#include <linux/sched.h>
+
+struct mmc_host;
+struct mmc_card;
+struct mmc_request;
 
 #define MMC_CMD_RETRIES        3
 
@@ -43,8 +48,8 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr);
-int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
 int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,
@@ -69,6 +74,7 @@ void mmc_start_host(struct mmc_host *host);
 void mmc_stop_host(struct mmc_host *host);
 
 int _mmc_detect_card_removed(struct mmc_host *host);
+int mmc_detect_card_removed(struct mmc_host *host);
 
 int mmc_attach_mmc(struct mmc_host *host);
 int mmc_attach_sd(struct mmc_host *host);
@@ -98,5 +104,38 @@ static inline void mmc_register_pm_notifier(struct mmc_host *host) { }
 static inline void mmc_unregister_pm_notifier(struct mmc_host *host) { }
 #endif
 
-#endif
+void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq);
+bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq);
+
+int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+		unsigned int arg);
+int mmc_can_erase(struct mmc_card *card);
+int mmc_can_trim(struct mmc_card *card);
+int mmc_can_discard(struct mmc_card *card);
+int mmc_can_sanitize(struct mmc_card *card);
+int mmc_can_secure_erase_trim(struct mmc_card *card);
+int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+			unsigned int nr);
+unsigned int mmc_calc_max_discard(struct mmc_card *card);
+
+int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
+			bool is_rel_write);
+
+int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
+void mmc_release_host(struct mmc_host *host);
+void mmc_get_card(struct mmc_card *card);
+void mmc_put_card(struct mmc_card *card);
+
+/**
+ *	mmc_claim_host - exclusively claim a host
+ *	@host: mmc host to claim
+ *
+ *	Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, NULL);
+}
 
+#endif

drivers/mmc/core/debugfs.c

@@ -20,6 +20,8 @@
 #include <linux/mmc/host.h>
 
 #include "core.h"
+#include "card.h"
+#include "host.h"
 #include "mmc_ops.h"
 
 #ifdef CONFIG_FAIL_MMC_REQUEST

drivers/mmc/core/host.c

@@ -34,14 +34,11 @@
 #define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)
 
 static DEFINE_IDA(mmc_host_ida);
-static DEFINE_SPINLOCK(mmc_host_lock);
 
 static void mmc_host_classdev_release(struct device *dev)
 {
 	struct mmc_host *host = cls_dev_to_mmc_host(dev);
-	spin_lock(&mmc_host_lock);
-	ida_remove(&mmc_host_ida, host->index);
-	spin_unlock(&mmc_host_lock);
+	ida_simple_remove(&mmc_host_ida, host->index);
 	kfree(host);
 }
 
@@ -301,6 +298,8 @@ int mmc_of_parse(struct mmc_host *host)
 	if (of_property_read_bool(np, "wakeup-source") ||
 	    of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
 		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+	if (of_property_read_bool(np, "mmc-ddr-3_3v"))
+		host->caps |= MMC_CAP_3_3V_DDR;
 	if (of_property_read_bool(np, "mmc-ddr-1_8v"))
 		host->caps |= MMC_CAP_1_8V_DDR;
 	if (of_property_read_bool(np, "mmc-ddr-1_2v"))
@@ -354,22 +353,13 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 	/* scanning will be enabled when we're ready */
 	host->rescan_disable = 1;
 
-again:
-	if (!ida_pre_get(&mmc_host_ida, GFP_KERNEL)) {
+	err = ida_simple_get(&mmc_host_ida, 0, 0, GFP_KERNEL);
+	if (err < 0) {
 		kfree(host);
 		return NULL;
 	}
 
-	spin_lock(&mmc_host_lock);
-	err = ida_get_new(&mmc_host_ida, &host->index);
-	spin_unlock(&mmc_host_lock);
-
-	if (err == -EAGAIN) {
-		goto again;
-	} else if (err) {
-		kfree(host);
-		return NULL;
-	}
+	host->index = err;
 
 	dev_set_name(&host->class_dev, "mmc%d", host->index);
 
@@ -381,6 +371,8 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 
 	if (mmc_gpio_alloc(host)) {
 		put_device(&host->class_dev);
+		ida_simple_remove(&mmc_host_ida, host->index);
+		kfree(host);
 		return NULL;
 	}
 

drivers/mmc/core/host.h

@@ -10,6 +10,7 @@
  */
 #ifndef _MMC_CORE_HOST_H
 #define _MMC_CORE_HOST_H
+
 #include <linux/mmc/host.h>
 
 int mmc_register_host_class(void);
@@ -20,6 +21,53 @@ void mmc_retune_disable(struct mmc_host *host);
 void mmc_retune_hold(struct mmc_host *host);
 void mmc_retune_release(struct mmc_host *host);
 int mmc_retune(struct mmc_host *host);
+void mmc_retune_pause(struct mmc_host *host);
+void mmc_retune_unpause(struct mmc_host *host);
+
+static inline void mmc_retune_recheck(struct mmc_host *host)
+{
+	if (host->hold_retune <= 1)
+		host->retune_now = 1;
+}
+
+static inline int mmc_host_cmd23(struct mmc_host *host)
+{
+	return host->caps & MMC_CAP_CMD23;
+}
+
+static inline int mmc_boot_partition_access(struct mmc_host *host)
+{
+	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
+}
+
+static inline int mmc_host_uhs(struct mmc_host *host)
+{
+	return host->caps &
+		(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
+		 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 |
+		 MMC_CAP_UHS_DDR50);
+}
+
+static inline bool mmc_card_hs200(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS200;
+}
+
+static inline bool mmc_card_ddr52(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_DDR52;
+}
+
+static inline bool mmc_card_hs400(struct mmc_card *card)
+{
+	return card->host->ios.timing == MMC_TIMING_MMC_HS400;
+}
+
+static inline bool mmc_card_hs400es(struct mmc_card *card)
+{
+	return card->host->ios.enhanced_strobe;
+}
+
 
 #endif
 

drivers/mmc/core/mmc.c

@@ -21,9 +21,11 @@
 #include <linux/mmc/mmc.h>
 
 #include "core.h"
+#include "card.h"
 #include "host.h"
 #include "bus.h"
 #include "mmc_ops.h"
+#include "quirks.h"
 #include "sd_ops.h"
 
 #define DEFAULT_CMD6_TIMEOUT_MS	500
@@ -47,17 +49,6 @@ static const unsigned int tacc_mant[] = {
 	35,	40,	45,	50,	55,	60,	70,	80,
 };
 
-static const struct mmc_fixup mmc_ext_csd_fixups[] = {
-	/*
-	 * Certain Hynix eMMC 4.41 cards might get broken when HPI feature
-	 * is used so disable the HPI feature for such buggy cards.
-	 */
-	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX,
-			      0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5),
-
-	END_FIXUP
-};
-
 #define UNSTUFF_BITS(resp,start,size)					\
 	({								\
 		const int __size = size;				\
@@ -212,7 +203,7 @@ static void mmc_select_card_type(struct mmc_card *card)
 		avail_type |= EXT_CSD_CARD_TYPE_HS_52;
 	}
 
-	if (caps & MMC_CAP_1_8V_DDR &&
+	if (caps & (MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR) &&
 	    card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
 		hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
 		avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
@@ -307,6 +298,18 @@ static void mmc_manage_enhanced_area(struct mmc_card *card, u8 *ext_csd)
 	}
 }
 
+static void mmc_part_add(struct mmc_card *card, unsigned int size,
+			 unsigned int part_cfg, char *name, int idx, bool ro,
+			 int area_type)
+{
+	card->part[card->nr_parts].size = size;
+	card->part[card->nr_parts].part_cfg = part_cfg;
+	sprintf(card->part[card->nr_parts].name, name, idx);
+	card->part[card->nr_parts].force_ro = ro;
+	card->part[card->nr_parts].area_type = area_type;
+	card->nr_parts++;
+}
+
 static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd)
 {
 	int idx;
@@ -530,8 +533,14 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 						EXT_CSD_MANUAL_BKOPS_MASK);
 			card->ext_csd.raw_bkops_status =
 				ext_csd[EXT_CSD_BKOPS_STATUS];
-			if (!card->ext_csd.man_bkops_en)
-				pr_debug("%s: MAN_BKOPS_EN bit is not set\n",
+			if (card->ext_csd.man_bkops_en)
+				pr_debug("%s: MAN_BKOPS_EN bit is set\n",
+					mmc_hostname(card->host));
+			card->ext_csd.auto_bkops_en =
+					(ext_csd[EXT_CSD_BKOPS_EN] &
+						EXT_CSD_AUTO_BKOPS_MASK);
+			if (card->ext_csd.auto_bkops_en)
+				pr_debug("%s: AUTO_BKOPS_EN bit is set\n",
 					mmc_hostname(card->host));
 		}
 
@@ -617,6 +626,12 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		card->ext_csd.ffu_capable =
 			(ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
 			!(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
+
+		card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO];
+		card->ext_csd.device_life_time_est_typ_a =
+			ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A];
+		card->ext_csd.device_life_time_est_typ_b =
+			ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B];
 	}
 
 	/* eMMC v5.1 or later */
@@ -764,6 +779,10 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
 MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
 MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
 MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv);
+MMC_DEV_ATTR(pre_eol_info, "%02x\n", card->ext_csd.pre_eol_info);
+MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n",
+	card->ext_csd.device_life_time_est_typ_a,
+	card->ext_csd.device_life_time_est_typ_b);
 MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
 MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
 		card->ext_csd.enhanced_area_offset);
@@ -817,6 +836,8 @@ static struct attribute *mmc_std_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_oemid.attr,
 	&dev_attr_prv.attr,
+	&dev_attr_pre_eol_info.attr,
+	&dev_attr_life_time.attr,
 	&dev_attr_serial.attr,
 	&dev_attr_enhanced_area_offset.attr,
 	&dev_attr_enhanced_area_size.attr,
@@ -1095,16 +1116,19 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
 	 *
 	 * WARNING: eMMC rules are NOT the same as SD DDR
 	 */
-	err = -EINVAL;
-	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+		if (!err)
+			return 0;
+	}
 
-	if (err && (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V))
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V &&
+	    host->caps & MMC_CAP_1_8V_DDR)
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
 
 	/* make sure vccq is 3.3v after switching disaster */
 	if (err)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
 
 	return err;
 }
@@ -1271,10 +1295,10 @@ static int mmc_select_hs400es(struct mmc_card *card)
 	}
 
 	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
 
 	if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
 
 	/* If fails try again during next card power cycle */
 	if (err)
@@ -1380,10 +1404,10 @@ static int mmc_select_hs200(struct mmc_card *card)
 
 	old_signal_voltage = host->ios.signal_voltage;
 	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
 
 	if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
-		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
 
 	/* If fails try again during next card power cycle */
 	if (err)
@@ -1425,7 +1449,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 err:
 	if (err) {
 		/* fall back to the old signal voltage, if fails report error */
-		if (__mmc_set_signal_voltage(host, old_signal_voltage))
+		if (mmc_set_signal_voltage(host, old_signal_voltage))
 			err = -EIO;
 
 		pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
@@ -1805,7 +1829,7 @@ static int mmc_can_sleep(struct mmc_card *card)
 
 static int mmc_sleep(struct mmc_host *host)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	struct mmc_card *card = host->card;
 	unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000);
 	int err;

drivers/mmc/core/mmc_ops.c

@@ -57,7 +57,7 @@ static const u8 tuning_blk_pattern_8bit[] = {
 int mmc_send_status(struct mmc_card *card, u32 *status)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_SEND_STATUS;
 	if (!mmc_host_is_spi(card->host))
@@ -79,7 +79,7 @@ int mmc_send_status(struct mmc_card *card, u32 *status)
 
 static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_SELECT_CARD;
 
@@ -115,7 +115,7 @@ int mmc_deselect_cards(struct mmc_host *host)
  */
 int mmc_set_dsr(struct mmc_host *host)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_SET_DSR;
 
@@ -128,7 +128,7 @@ int mmc_set_dsr(struct mmc_host *host)
 int mmc_go_idle(struct mmc_host *host)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	/*
 	 * Non-SPI hosts need to prevent chipselect going active during
@@ -164,7 +164,7 @@ int mmc_go_idle(struct mmc_host *host)
 
 int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int i, err = 0;
 
 	cmd.opcode = MMC_SEND_OP_COND;
@@ -203,7 +203,7 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_ALL_SEND_CID;
 	cmd.arg = 0;
@@ -220,7 +220,7 @@ int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
 
 int mmc_set_relative_addr(struct mmc_card *card)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = MMC_SET_RELATIVE_ADDR;
 	cmd.arg = card->rca << 16;
@@ -233,7 +233,7 @@ static int
 mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = opcode;
 	cmd.arg = arg;
@@ -256,9 +256,9 @@ static int
 mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
 		u32 opcode, void *buf, unsigned len)
 {
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 
 	mrq.cmd = &cmd;
@@ -387,7 +387,7 @@ EXPORT_SYMBOL_GPL(mmc_get_ext_csd);
 
 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int err;
 
 	cmd.opcode = MMC_SPI_READ_OCR;
@@ -402,7 +402,7 @@ int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
 
 int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int err;
 
 	cmd.opcode = MMC_SPI_CRC_ON_OFF;
@@ -530,7 +530,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 {
 	struct mmc_host *host = card->host;
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	bool use_r1b_resp = use_busy_signal;
 	unsigned char old_timing = host->ios.timing;
 
@@ -610,9 +610,9 @@ EXPORT_SYMBOL_GPL(mmc_switch);
 
 int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error)
 {
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 	struct mmc_ios *ios = &host->ios;
 	const u8 *tuning_block_pattern;
@@ -679,7 +679,7 @@ EXPORT_SYMBOL_GPL(mmc_send_tuning);
 
 int mmc_abort_tuning(struct mmc_host *host, u32 opcode)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	/*
 	 * eMMC specification specifies that CMD12 can be used to stop a tuning
@@ -706,9 +706,9 @@ static int
 mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
 		  u8 len)
 {
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 	u8 *data_buf;
 	u8 *test_buf;
@@ -802,7 +802,7 @@ int mmc_bus_test(struct mmc_card *card, u8 bus_width)
 
 int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	unsigned int opcode;
 	int err;
 

drivers/mmc/core/mmc_ops.h

@@ -12,6 +12,11 @@
 #ifndef _MMC_MMC_OPS_H
 #define _MMC_MMC_OPS_H
 
+#include <linux/types.h>
+
+struct mmc_host;
+struct mmc_card;
+
 int mmc_select_card(struct mmc_card *card);
 int mmc_deselect_cards(struct mmc_host *host);
 int mmc_set_dsr(struct mmc_host *host);
@@ -26,12 +31,21 @@ int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
 int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
 int mmc_bus_test(struct mmc_card *card, u8 bus_width);
 int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
+int mmc_interrupt_hpi(struct mmc_card *card);
 int mmc_can_ext_csd(struct mmc_card *card);
+int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
 int mmc_switch_status(struct mmc_card *card);
 int __mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms, unsigned char timing,
 		bool use_busy_signal, bool send_status,	bool retry_crc_err);
+int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
+		unsigned int timeout_ms);
+int mmc_stop_bkops(struct mmc_card *card);
+int mmc_read_bkops_status(struct mmc_card *card);
+void mmc_start_bkops(struct mmc_card *card, bool from_exception);
+int mmc_can_reset(struct mmc_card *card);
+int mmc_flush_cache(struct mmc_card *card);
 
 #endif
 

drivers/mmc/core/pwrseq.h

@@ -8,7 +8,11 @@
 #ifndef _MMC_CORE_PWRSEQ_H
 #define _MMC_CORE_PWRSEQ_H
 
-#include <linux/mmc/host.h>
+#include <linux/types.h>
+
+struct mmc_host;
+struct device;
+struct module;
 
 struct mmc_pwrseq_ops {
 	void (*pre_power_on)(struct mmc_host *host);

drivers/mmc/core/pwrseq_sd8787.c

+/*
+ * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip
+ *
+ * Copyright (C) 2016 Matt Ranostay <matt@ranostay.consulting>
+ *
+ * Based on the original work pwrseq_simple.c
+ *  Copyright (C) 2014 Linaro Ltd
+ *  Author: Ulf Hansson <ulf.hansson@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/mmc/host.h>
+
+#include "pwrseq.h"
+
+struct mmc_pwrseq_sd8787 {
+	struct mmc_pwrseq pwrseq;
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *pwrdn_gpio;
+};
+
+#define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787, pwrseq)
+
+static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host *host)
+{
+	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);
+
+	gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);
+
+	msleep(300);
+	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1);
+}
+
+static void mmc_pwrseq_sd8787_power_off(struct mmc_host *host)
+{
+	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);
+
+	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0);
+	gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
+}
+
+static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops = {
+	.pre_power_on = mmc_pwrseq_sd8787_pre_power_on,
+	.power_off = mmc_pwrseq_sd8787_power_off,
+};
+
+static const struct of_device_id mmc_pwrseq_sd8787_of_match[] = {
+	{ .compatible = "mmc-pwrseq-sd8787",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mmc_pwrseq_sd8787_of_match);
+
+static int mmc_pwrseq_sd8787_probe(struct platform_device *pdev)
+{
+	struct mmc_pwrseq_sd8787 *pwrseq;
+	struct device *dev = &pdev->dev;
+
+	pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
+	if (!pwrseq)
+		return -ENOMEM;
+
+	pwrseq->pwrdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW);
+	if (IS_ERR(pwrseq->pwrdn_gpio))
+		return PTR_ERR(pwrseq->pwrdn_gpio);
+
+	pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(pwrseq->reset_gpio))
+		return PTR_ERR(pwrseq->reset_gpio);
+
+	pwrseq->pwrseq.dev = dev;
+	pwrseq->pwrseq.ops = &mmc_pwrseq_sd8787_ops;
+	pwrseq->pwrseq.owner = THIS_MODULE;
+	platform_set_drvdata(pdev, pwrseq);
+
+	return mmc_pwrseq_register(&pwrseq->pwrseq);
+}
+
+static int mmc_pwrseq_sd8787_remove(struct platform_device *pdev)
+{
+	struct mmc_pwrseq_sd8787 *pwrseq = platform_get_drvdata(pdev);
+
+	mmc_pwrseq_unregister(&pwrseq->pwrseq);
+
+	return 0;
+}
+
+static struct platform_driver mmc_pwrseq_sd8787_driver = {
+	.probe = mmc_pwrseq_sd8787_probe,
+	.remove = mmc_pwrseq_sd8787_remove,
+	.driver = {
+		.name = "pwrseq_sd8787",
+		.of_match_table = mmc_pwrseq_sd8787_of_match,
+	},
+};
+
+module_platform_driver(mmc_pwrseq_sd8787_driver);
+MODULE_LICENSE("GPL v2");

drivers/mmc/core/queue.c

@@ -20,6 +20,8 @@
 
 #include "queue.h"
 #include "block.h"
+#include "core.h"
+#include "card.h"
 
 #define MMC_QUEUE_BOUNCESZ	65536
 
@@ -75,8 +77,8 @@ static int mmc_queue_thread(void *d)
 			set_current_state(TASK_RUNNING);
 			mmc_blk_issue_rq(mq, req);
 			cond_resched();
-			if (mq->flags & MMC_QUEUE_NEW_REQUEST) {
-				mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
+			if (mq->new_request) {
+				mq->new_request = false;
 				continue; /* fetch again */
 			}
 
@@ -143,7 +145,7 @@ static struct scatterlist *mmc_alloc_sg(int sg_len, int *err)
 {
 	struct scatterlist *sg;
 
-	sg = kmalloc(sizeof(struct scatterlist)*sg_len, GFP_KERNEL);
+	sg = kmalloc_array(sg_len, sizeof(*sg), GFP_KERNEL);
 	if (!sg)
 		*err = -ENOMEM;
 	else {
@@ -390,8 +392,8 @@ void mmc_queue_suspend(struct mmc_queue *mq)
 	struct request_queue *q = mq->queue;
 	unsigned long flags;
 
-	if (!(mq->flags & MMC_QUEUE_SUSPENDED)) {
-		mq->flags |= MMC_QUEUE_SUSPENDED;
+	if (!mq->suspended) {
+		mq->suspended |= true;
 
 		spin_lock_irqsave(q->queue_lock, flags);
 		blk_stop_queue(q);
@@ -410,8 +412,8 @@ void mmc_queue_resume(struct mmc_queue *mq)
 	struct request_queue *q = mq->queue;
 	unsigned long flags;
 
-	if (mq->flags & MMC_QUEUE_SUSPENDED) {
-		mq->flags &= ~MMC_QUEUE_SUSPENDED;
+	if (mq->suspended) {
+		mq->suspended = false;
 
 		up(&mq->thread_sem);
 

drivers/mmc/core/queue.h

 #ifndef MMC_QUEUE_H
 #define MMC_QUEUE_H
 
+#include <linux/types.h>
+#include <linux/blkdev.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+
 static inline bool mmc_req_is_special(struct request *req)
 {
 	return req &&
@@ -9,7 +14,6 @@ static inline bool mmc_req_is_special(struct request *req)
 		 req_op(req) == REQ_OP_SECURE_ERASE);
 }
 
-struct request;
 struct task_struct;
 struct mmc_blk_data;
 
@@ -29,16 +33,15 @@ struct mmc_queue_req {
 	char			*bounce_buf;
 	struct scatterlist	*bounce_sg;
 	unsigned int		bounce_sg_len;
-	struct mmc_async_req	mmc_active;
+	struct mmc_async_req	areq;
 };
 
 struct mmc_queue {
 	struct mmc_card		*card;
 	struct task_struct	*thread;
 	struct semaphore	thread_sem;
-	unsigned int		flags;
-#define MMC_QUEUE_SUSPENDED	(1 << 0)
-#define MMC_QUEUE_NEW_REQUEST	(1 << 1)
+	bool			new_request;
+	bool			suspended;
 	bool			asleep;
 	struct mmc_blk_data	*blkdata;
 	struct request_queue	*queue;

drivers/mmc/core/quirks.c → drivers/mmc/core/quirks.h

@@ -9,33 +9,102 @@
  *
  */
 
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/mmc/card.h>
 #include <linux/mmc/sdio_ids.h>
 
-#ifndef SDIO_VENDOR_ID_TI
-#define SDIO_VENDOR_ID_TI		0x0097
-#endif
+#include "card.h"
 
-#ifndef SDIO_DEVICE_ID_TI_WL1271
-#define SDIO_DEVICE_ID_TI_WL1271	0x4076
-#endif
+static const struct mmc_fixup mmc_blk_fixups[] = {
+#define INAND_CMD38_ARG_EXT_CSD  113
+#define INAND_CMD38_ARG_ERASE    0x00
+#define INAND_CMD38_ARG_TRIM     0x01
+#define INAND_CMD38_ARG_SECERASE 0x80
+#define INAND_CMD38_ARG_SECTRIM1 0x81
+#define INAND_CMD38_ARG_SECTRIM2 0x88
+	/* CMD38 argument is passed through EXT_CSD[113] */
+	MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk,
+		  MMC_QUIRK_INAND_CMD38),
+	MMC_FIXUP("SEM04G", CID_MANFID_SANDISK, 0x100, add_quirk,
+		  MMC_QUIRK_INAND_CMD38),
+	MMC_FIXUP("SEM08G", CID_MANFID_SANDISK, 0x100, add_quirk,
+		  MMC_QUIRK_INAND_CMD38),
+	MMC_FIXUP("SEM16G", CID_MANFID_SANDISK, 0x100, add_quirk,
+		  MMC_QUIRK_INAND_CMD38),
+	MMC_FIXUP("SEM32G", CID_MANFID_SANDISK, 0x100, add_quirk,
+		  MMC_QUIRK_INAND_CMD38),
 
-#ifndef SDIO_VENDOR_ID_STE
-#define SDIO_VENDOR_ID_STE		0x0020
-#endif
+	/*
+	 * Some MMC cards experience performance degradation with CMD23
+	 * instead of CMD12-bounded multiblock transfers. For now we'll
+	 * black list what's bad...
+	 * - Certain Toshiba cards.
+	 *
+	 * N.B. This doesn't affect SD cards.
+	 */
+	MMC_FIXUP("SDMB-32", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("SDM032", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("MMC08G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("MMC16G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_BLK_NO_CMD23),
 
-#ifndef SDIO_DEVICE_ID_STE_CW1200
-#define SDIO_DEVICE_ID_STE_CW1200	0x2280
-#endif
+	/*
+	 * Some MMC cards need longer data read timeout than indicated in CSD.
+	 */
+	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
+		  MMC_QUIRK_LONG_READ_TIME),
+	MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_LONG_READ_TIME),
 
-#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0
-#define SDIO_DEVICE_ID_MARVELL_8797_F0	0x9128
-#endif
+	/*
+	 * On these Samsung MoviNAND parts, performing secure erase or
+	 * secure trim can result in unrecoverable corruption due to a
+	 * firmware bug.
+	 */
+	MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
 
-static const struct mmc_fixup mmc_fixup_methods[] = {
+	/*
+	 *  On Some Kingston eMMCs, performing trim can result in
+	 *  unrecoverable data conrruption occasionally due to a firmware bug.
+	 */
+	MMC_FIXUP("V10008", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_TRIM_BROKEN),
+	MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_TRIM_BROKEN),
+
+	END_FIXUP
+};
+
+static const struct mmc_fixup mmc_ext_csd_fixups[] = {
+	/*
+	 * Certain Hynix eMMC 4.41 cards might get broken when HPI feature
+	 * is used so disable the HPI feature for such buggy cards.
+	 */
+	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX,
+			      0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5),
+
+	END_FIXUP
+};
+
+static const struct mmc_fixup sdio_fixup_methods[] = {
 	SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271,
 		   add_quirk, MMC_QUIRK_NONSTD_FUNC_IF),
 
@@ -51,15 +120,12 @@ static const struct mmc_fixup mmc_fixup_methods[] = {
 	END_FIXUP
 };
 
-void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
+static inline void mmc_fixup_device(struct mmc_card *card,
+				    const struct mmc_fixup *table)
 {
 	const struct mmc_fixup *f;
 	u64 rev = cid_rev_card(card);
 
-	/* Non-core specific workarounds. */
-	if (!table)
-		table = mmc_fixup_methods;
-
 	for (f = table; f->vendor_fixup; f++) {
 		if ((f->manfid == CID_MANFID_ANY ||
 		     f->manfid == card->cid.manfid) &&
@@ -80,4 +146,3 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
 		}
 	}
 }
-EXPORT_SYMBOL(mmc_fixup_device);

drivers/mmc/core/sd.c

@@ -22,6 +22,8 @@
 #include <linux/mmc/sd.h>
 
 #include "core.h"
+#include "card.h"
+#include "host.h"
 #include "bus.h"
 #include "mmc_ops.h"
 #include "sd.h"
@@ -786,8 +788,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 */
 	if (!mmc_host_is_spi(host) && rocr &&
 	   ((*rocr & 0x41000000) == 0x41000000)) {
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
-					pocr);
+		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
 			goto try_again;

drivers/mmc/core/sd.h

 #ifndef _MMC_CORE_SD_H
 #define _MMC_CORE_SD_H
 
-#include <linux/mmc/card.h>
+#include <linux/types.h>
 
 extern struct device_type sd_type;
 
+struct mmc_host;
+struct mmc_card;
+
 int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr);
 int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card);
 void mmc_decode_cid(struct mmc_card *card);

drivers/mmc/core/sd_ops.c

@@ -25,7 +25,7 @@
 int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	if (WARN_ON(card && card->host != host))
 		return -EINVAL;
@@ -68,7 +68,7 @@ EXPORT_SYMBOL_GPL(mmc_app_cmd);
 int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
 	struct mmc_command *cmd, int retries)
 {
-	struct mmc_request mrq = {NULL};
+	struct mmc_request mrq = {};
 
 	int i, err;
 
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(mmc_wait_for_app_cmd);
 
 int mmc_app_set_bus_width(struct mmc_card *card, int width)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = SD_APP_SET_BUS_WIDTH;
 	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
@@ -141,7 +141,7 @@ int mmc_app_set_bus_width(struct mmc_card *card, int width)
 
 int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int i, err = 0;
 
 	cmd.opcode = SD_APP_OP_COND;
@@ -185,7 +185,7 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 
 int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int err;
 	static const u8 test_pattern = 0xAA;
 	u8 result_pattern;
@@ -217,7 +217,7 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
 int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	cmd.opcode = SD_SEND_RELATIVE_ADDR;
 	cmd.arg = 0;
@@ -235,9 +235,9 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca)
 int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
 {
 	int err;
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 	void *data_buf;
 
@@ -290,9 +290,9 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
 int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 	u8 value, u8 *resp)
 {
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 
 	/* NOTE: caller guarantees resp is heap-allocated */
@@ -332,9 +332,9 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 int mmc_app_sd_status(struct mmc_card *card, void *ssr)
 {
 	int err;
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg;
 
 	/* NOTE: caller guarantees ssr is heap-allocated */

drivers/mmc/core/sd_ops.h

@@ -12,6 +12,12 @@
 #ifndef _MMC_SD_OPS_H
 #define _MMC_SD_OPS_H
 
+#include <linux/types.h>
+
+struct mmc_card;
+struct mmc_host;
+struct mmc_command;
+
 int mmc_app_set_bus_width(struct mmc_card *card, int width);
 int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
 int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
@@ -20,6 +26,9 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
 int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 	u8 value, u8 *resp);
 int mmc_app_sd_status(struct mmc_card *card, void *ssr);
+int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card);
+int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
+	struct mmc_command *cmd, int retries);
 
 #endif
 

drivers/mmc/core/sdio.c

@@ -20,7 +20,10 @@
 #include <linux/mmc/sdio_ids.h>
 
 #include "core.h"
+#include "card.h"
+#include "host.h"
 #include "bus.h"
+#include "quirks.h"
 #include "sd.h"
 #include "sdio_bus.h"
 #include "mmc_ops.h"
@@ -541,6 +544,15 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 	return err;
 }
 
+static void mmc_sdio_resend_if_cond(struct mmc_host *host,
+				    struct mmc_card *card)
+{
+	sdio_reset(host);
+	mmc_go_idle(host);
+	mmc_send_if_cond(host, host->ocr_avail);
+	mmc_remove_card(card);
+}
+
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -624,24 +636,21 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 * to switch to 1.8V signaling level.  No 1.8v signalling if
 	 * UHS mode is not enabled to maintain compatibility and some
 	 * systems that claim 1.8v signalling in fact do not support
-	 * it.
+	 * it. Per SDIO spec v3, section 3.1.2, if the voltage is already
+	 * 1.8v, the card sets S18A to 0 in the R4 response. So it will
+	 * fails to check rocr & R4_18V_PRESENT,  but we still need to
+	 * try to init uhs card. sdio_read_cccr will take over this task
+	 * to make sure which speed mode should work.
 	 */
 	if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) {
-		err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
-					ocr_card);
+		err = mmc_set_uhs_voltage(host, ocr_card);
 		if (err == -EAGAIN) {
-			sdio_reset(host);
-			mmc_go_idle(host);
-			mmc_send_if_cond(host, host->ocr_avail);
-			mmc_remove_card(card);
+			mmc_sdio_resend_if_cond(host, card);
 			retries--;
 			goto try_again;
 		} else if (err) {
 			ocr &= ~R4_18V_PRESENT;
 		}
-		err = 0;
-	} else {
-		ocr &= ~R4_18V_PRESENT;
 	}
 
 	/*
@@ -698,11 +707,20 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
-	 * Read the common registers.
+	 * Read the common registers. Note that we should try to
+	 * validate whether UHS would work or not.
 	 */
 	err = sdio_read_cccr(card, ocr);
-	if (err)
-		goto remove;
+	if (err) {
+		mmc_sdio_resend_if_cond(host, card);
+		if (ocr & R4_18V_PRESENT) {
+			/* Retry init sequence, but without R4_18V_PRESENT. */
+			retries = 0;
+			goto try_again;
+		} else {
+			goto remove;
+		}
+	}
 
 	/*
 	 * Read the common CIS tuples.
@@ -721,7 +739,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		card = oldcard;
 	}
 	card->ocr = ocr_card;
-	mmc_fixup_device(card, NULL);
+	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {
 		err = mmc_sd_setup_card(host, card, oldcard != NULL);

drivers/mmc/core/sdio_bus.c

@@ -25,6 +25,7 @@
 #include <linux/of.h>
 
 #include "core.h"
+#include "card.h"
 #include "sdio_cis.h"
 #include "sdio_bus.h"
 

drivers/mmc/core/sdio_bus.h

@@ -11,6 +11,9 @@
 #ifndef _MMC_CORE_SDIO_BUS_H
 #define _MMC_CORE_SDIO_BUS_H
 
+struct mmc_card;
+struct sdio_func;
+
 struct sdio_func *sdio_alloc_func(struct mmc_card *card);
 int sdio_add_func(struct sdio_func *func);
 void sdio_remove_func(struct sdio_func *func);

drivers/mmc/core/sdio_cis.h

@@ -14,6 +14,9 @@
 #ifndef _MMC_SDIO_CIS_H
 #define _MMC_SDIO_CIS_H
 
+struct mmc_card;
+struct sdio_func;
+
 int sdio_read_common_cis(struct mmc_card *card);
 void sdio_free_common_cis(struct mmc_card *card);
 

drivers/mmc/core/sdio_io.c

@@ -16,6 +16,8 @@
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_ops.h"
+#include "core.h"
+#include "card.h"
 
 /**
  *	sdio_claim_host - exclusively claim a bus for a certain SDIO function

drivers/mmc/core/sdio_irq.c

@@ -27,6 +27,8 @@
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_ops.h"
+#include "core.h"
+#include "card.h"
 
 static int process_sdio_pending_irqs(struct mmc_host *host)
 {

drivers/mmc/core/sdio_ops.c

@@ -21,7 +21,7 @@
 
 int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int i, err = 0;
 
 	cmd.opcode = SD_IO_SEND_OP_COND;
@@ -66,7 +66,7 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
 	unsigned addr, u8 in, u8 *out)
 {
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 	int err;
 
 	if (fn > 7)
@@ -118,9 +118,9 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
 {
-	struct mmc_request mrq = {NULL};
-	struct mmc_command cmd = {0};
-	struct mmc_data data = {0};
+	struct mmc_request mrq = {};
+	struct mmc_command cmd = {};
+	struct mmc_data data = {};
 	struct scatterlist sg, *sg_ptr;
 	struct sg_table sgtable;
 	unsigned int nents, left_size, i;

drivers/mmc/core/sdio_ops.h

@@ -12,14 +12,19 @@
 #ifndef _MMC_SDIO_OPS_H
 #define _MMC_SDIO_OPS_H
 
+#include <linux/types.h>
 #include <linux/mmc/sdio.h>
 
+struct mmc_host;
+struct mmc_card;
+
 int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
 int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, u8 in, u8* out);
 int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
 int sdio_reset(struct mmc_host *host);
+unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz);
 
 static inline bool mmc_is_io_op(u32 opcode)
 {

drivers/mmc/core/slot-gpio.c

@@ -235,9 +235,6 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
 	struct gpio_desc *desc;
 	int ret;
 
-	if (!con_id)
-		con_id = ctx->cd_label;
-
 	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);
@@ -289,9 +286,6 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
 	struct gpio_desc *desc;
 	int ret;
 
-	if (!con_id)
-		con_id = ctx->ro_label;
-
 	desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
 	if (IS_ERR(desc))
 		return PTR_ERR(desc);

drivers/mmc/core/slot-gpio.h

@@ -8,6 +8,8 @@
 #ifndef _MMC_CORE_SLOTGPIO_H
 #define _MMC_CORE_SLOTGPIO_H
 
+struct mmc_host;
+
 int mmc_gpio_alloc(struct mmc_host *host);
 
 #endif

drivers/mmc/host/Kconfig

@@ -683,6 +683,15 @@ config MMC_DW_ROCKCHIP
 	  Synopsys DesignWare Memory Card Interface driver. Select this option
 	  for platforms based on RK3066, RK3188 and RK3288 SoC's.
 
+config MMC_DW_ZX
+	tristate "ZTE specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW && ARCH_ZX
+	select MMC_DW_PLTFM
+	help
+	  This selects support for ZTE SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on ZX296718 SoC's.
+
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
 	depends on HAS_DMA

drivers/mmc/host/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
 obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
 obj-$(CONFIG_MMC_DW_ROCKCHIP)	+= dw_mmc-rockchip.o
+obj-$(CONFIG_MMC_DW_ZX)		+= dw_mmc-zx.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o

drivers/mmc/host/davinci_mmc.c

@@ -36,6 +36,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/mmc/slot-gpio.h>
+#include <linux/interrupt.h>
 
 #include <linux/platform_data/mmc-davinci.h>
 

drivers/mmc/host/dw_mmc-exynos.c

@@ -13,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
-#include <linux/mmc/dw_mmc.h>
 #include <linux/mmc/mmc.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>

drivers/mmc/host/dw_mmc-k3.c

@@ -11,7 +11,6 @@
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mmc/host.h>
-#include <linux/mmc/dw_mmc.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>

drivers/mmc/host/dw_mmc-pci.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
-#include <linux/mmc/dw_mmc.h>
 #include "dw_mmc.h"
 
 #define PCI_BAR_NO 2

drivers/mmc/host/dw_mmc-pltfm.c

@@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
-#include <linux/mmc/dw_mmc.h>
 #include <linux/of.h>
 #include <linux/clk.h>
 

drivers/mmc/host/dw_mmc-rockchip.c

@@ -11,7 +11,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
-#include <linux/mmc/dw_mmc.h>
 #include <linux/of_address.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/pm_runtime.h>

drivers/mmc/host/dw_mmc-zx.c

+/*
+ * ZX Specific Extensions for Synopsys DW Multimedia Card Interface driver
+ *
+ * Copyright (C) 2016, Linaro Ltd.
+ * Copyright (C) 2016, ZTE Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+#include "dw_mmc-zx.h"
+
+struct dw_mci_zx_priv_data {
+	struct regmap	*sysc_base;
+};
+
+enum delay_type {
+	DELAY_TYPE_READ,	/* read dqs delay */
+	DELAY_TYPE_CLK,		/* clk sample delay */
+};
+
+static int dw_mci_zx_emmc_set_delay(struct dw_mci *host, unsigned int delay,
+				    enum delay_type dflag)
+{
+	struct dw_mci_zx_priv_data *priv = host->priv;
+	struct regmap *sysc_base = priv->sysc_base;
+	unsigned int clksel;
+	unsigned int loop = 1000;
+	int ret;
+
+	if (!sysc_base)
+		return -EINVAL;
+
+	ret = regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0,
+				 PARA_HALF_CLK_MODE | PARA_DLL_BYPASS_MODE |
+				 PARA_PHASE_DET_SEL_MASK |
+				 PARA_DLL_LOCK_NUM_MASK |
+				 DLL_REG_SET | PARA_DLL_START_MASK,
+				 PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4));
+	if (ret)
+		return ret;
+
+	ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG1, &clksel);
+	if (ret)
+		return ret;
+
+	if (dflag == DELAY_TYPE_CLK) {
+		clksel &= ~CLK_SAMP_DELAY_MASK;
+		clksel |= CLK_SAMP_DELAY(delay);
+	} else {
+		clksel &= ~READ_DQS_DELAY_MASK;
+		clksel |= READ_DQS_DELAY(delay);
+	}
+
+	regmap_write(sysc_base, LB_AON_EMMC_CFG_REG1, clksel);
+	regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0,
+			   PARA_DLL_START_MASK | PARA_DLL_LOCK_NUM_MASK |
+			   DLL_REG_SET,
+			   PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4) |
+			   DLL_REG_SET);
+
+	do {
+		ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG2, &clksel);
+		if (ret)
+			return ret;
+
+	} while (--loop && !(clksel & ZX_DLL_LOCKED));
+
+	if (!loop) {
+		dev_err(host->dev, "Error: %s dll lock fail\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int dw_mci_zx_emmc_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+	struct dw_mci *host = slot->host;
+	struct mmc_host *mmc = slot->mmc;
+	int ret, len = 0, start = 0, end = 0, delay, best = 0;
+
+	for (delay = 1; delay < 128; delay++) {
+		ret = dw_mci_zx_emmc_set_delay(host, delay, DELAY_TYPE_CLK);
+		if (!ret && mmc_send_tuning(mmc, opcode, NULL)) {
+			if (start >= 0) {
+				end = delay - 1;
+				/* check and update longest good range */
+				if ((end - start) > len) {
+					best = (start + end) >> 1;
+					len = end - start;
+				}
+			}
+			start = -1;
+			end = 0;
+			continue;
+		}
+		if (start < 0)
+			start = delay;
+	}
+
+	if (start >= 0) {
+		end = delay - 1;
+		if ((end - start) > len) {
+			best = (start + end) >> 1;
+			len = end - start;
+		}
+	}
+	if (best < 0)
+		return -EIO;
+
+	dev_info(host->dev, "%s best range: start %d end %d\n", __func__,
+		 start, end);
+	return dw_mci_zx_emmc_set_delay(host, best, DELAY_TYPE_CLK);
+}
+
+static int dw_mci_zx_prepare_hs400_tuning(struct dw_mci *host,
+					  struct mmc_ios *ios)
+{
+	int ret;
+
+	/* config phase shift as 90 degree */
+	ret = dw_mci_zx_emmc_set_delay(host, 32, DELAY_TYPE_READ);
+	if (ret < 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int dw_mci_zx_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+	struct dw_mci *host = slot->host;
+
+	if (host->verid == 0x290a) /* only for emmc */
+		return dw_mci_zx_emmc_execute_tuning(slot, opcode);
+	/* TODO: Add 0x210a dedicated tuning for sd/sdio */
+
+	return 0;
+}
+
+static int dw_mci_zx_parse_dt(struct dw_mci *host)
+{
+	struct device_node *np = host->dev->of_node;
+	struct device_node *node;
+	struct dw_mci_zx_priv_data *priv;
+	struct regmap *sysc_base;
+	int ret;
+
+	/* syscon is needed only by emmc */
+	node = of_parse_phandle(np, "zte,aon-syscon", 0);
+	if (node) {
+		sysc_base = syscon_node_to_regmap(node);
+		of_node_put(node);
+
+		if (IS_ERR(sysc_base)) {
+			ret = PTR_ERR(sysc_base);
+			if (ret != -EPROBE_DEFER)
+				dev_err(host->dev, "Can't get syscon: %d\n",
+					ret);
+			return ret;
+		}
+	} else {
+		return 0;
+	}
+
+	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->sysc_base = sysc_base;
+	host->priv = priv;
+
+	return 0;
+}
+
+static unsigned long zx_dwmmc_caps[3] = {
+	MMC_CAP_CMD23,
+	MMC_CAP_CMD23,
+	MMC_CAP_CMD23,
+};
+
+static const struct dw_mci_drv_data zx_drv_data = {
+	.caps			= zx_dwmmc_caps,
+	.execute_tuning		= dw_mci_zx_execute_tuning,
+	.prepare_hs400_tuning	= dw_mci_zx_prepare_hs400_tuning,
+	.parse_dt               = dw_mci_zx_parse_dt,
+};
+
+static const struct of_device_id dw_mci_zx_match[] = {
+	{ .compatible = "zte,zx296718-dw-mshc", .data = &zx_drv_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_zx_match);
+
+static int dw_mci_zx_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	match = of_match_node(dw_mci_zx_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+static const struct dev_pm_ops dw_mci_zx_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
+			   dw_mci_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver dw_mci_zx_pltfm_driver = {
+	.probe		= dw_mci_zx_probe,
+	.remove		= dw_mci_pltfm_remove,
+	.driver		= {
+		.name		= "dwmmc_zx",
+		.of_match_table	= dw_mci_zx_match,
+		.pm		= &dw_mci_zx_dev_pm_ops,
+	},
+};
+
+module_platform_driver(dw_mci_zx_pltfm_driver);
+
+MODULE_DESCRIPTION("ZTE emmc/sd driver");
+MODULE_LICENSE("GPL v2");

drivers/mmc/host/dw_mmc-zx.h

+#ifndef _DW_MMC_ZX_H_
+#define _DW_MMC_ZX_H_
+
+/* ZX296718 SoC specific DLL register offset. */
+#define LB_AON_EMMC_CFG_REG0  0x1B0
+#define LB_AON_EMMC_CFG_REG1  0x1B4
+#define LB_AON_EMMC_CFG_REG2  0x1B8
+
+/* LB_AON_EMMC_CFG_REG0 register defines */
+#define PARA_DLL_START(x)	((x) & 0xFF)
+#define PARA_DLL_START_MASK	0xFF
+#define DLL_REG_SET		BIT(8)
+#define PARA_DLL_LOCK_NUM(x)	(((x) & 7) << 16)
+#define PARA_DLL_LOCK_NUM_MASK  (7 << 16)
+#define PARA_PHASE_DET_SEL(x)	(((x) & 7) << 20)
+#define PARA_PHASE_DET_SEL_MASK	(7 << 20)
+#define PARA_DLL_BYPASS_MODE	BIT(23)
+#define PARA_HALF_CLK_MODE	BIT(24)
+
+/* LB_AON_EMMC_CFG_REG1 register defines */
+#define READ_DQS_DELAY(x)	((x) & 0x7F)
+#define READ_DQS_DELAY_MASK	(0x7F)
+#define READ_DQS_BYPASS_MODE	BIT(7)
+#define CLK_SAMP_DELAY(x)	(((x) & 0x7F) << 8)
+#define CLK_SAMP_DELAY_MASK	(0x7F << 8)
+#define CLK_SAMP_BYPASS_MODE	BIT(15)
+
+/* LB_AON_EMMC_CFG_REG2 register defines */
+#define ZX_DLL_LOCKED		BIT(2)
+
+#endif /* _DW_MMC_ZX_H_ */

drivers/mmc/host/dw_mmc.c

@@ -32,7 +32,6 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
-#include <linux/mmc/dw_mmc.h>
 #include <linux/bitops.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
@@ -1113,11 +1112,15 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 		mci_writel(host, CTRL, temp);
 
 		/*
-		 * Use the initial fifoth_val for PIO mode.
+		 * Use the initial fifoth_val for PIO mode. If wm_algined
+		 * is set, we set watermark same as data size.
 		 * If next issued data may be transfered by DMA mode,
 		 * prev_blksz should be invalidated.
 		 */
-		mci_writel(host, FIFOTH, host->fifoth_val);
+		if (host->wm_aligned)
+			dw_mci_adjust_fifoth(host, data);
+		else
+			mci_writel(host, FIFOTH, host->fifoth_val);
 		host->prev_blksz = 0;
 	} else {
 		/*
@@ -1179,11 +1182,13 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 		if ((clock != slot->__clk_old &&
 			!test_bit(DW_MMC_CARD_NEEDS_POLL, &slot->flags)) ||
 			force_clkinit) {
-			dev_info(&slot->mmc->class_dev,
-				 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
-				 slot->id, host->bus_hz, clock,
-				 div ? ((host->bus_hz / div) >> 1) :
-				 host->bus_hz, div);
+			/* Silent the verbose log if calling from PM context */
+			if (!force_clkinit)
+				dev_info(&slot->mmc->class_dev,
+					 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
+					 slot->id, host->bus_hz, clock,
+					 div ? ((host->bus_hz / div) >> 1) :
+					 host->bus_hz, div);
 
 			/*
 			 * If card is polling, display the message only
@@ -2977,6 +2982,11 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 
 	of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
 
+	of_property_read_u32(np, "data-addr", &host->data_addr_override);
+
+	if (of_get_property(np, "fifo-watermark-aligned", NULL))
+		host->wm_aligned = true;
+
 	if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
 		pdata->bus_hz = clock_frequency;
 
@@ -3180,7 +3190,9 @@ int dw_mci_probe(struct dw_mci *host)
 	host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
 	dev_info(host->dev, "Version ID is %04x\n", host->verid);
 
-	if (host->verid < DW_MMC_240A)
+	if (host->data_addr_override)
+		host->fifo_reg = host->regs + host->data_addr_override;
+	else if (host->verid < DW_MMC_240A)
 		host->fifo_reg = host->regs + DATA_OFFSET;
 	else
 		host->fifo_reg = host->regs + DATA_240A_OFFSET;

drivers/mmc/host/dw_mmc.h

@@ -14,6 +14,269 @@
 #ifndef _DW_MMC_H_
 #define _DW_MMC_H_
 
+#include <linux/scatterlist.h>
+#include <linux/mmc/core.h>
+#include <linux/dmaengine.h>
+#include <linux/reset.h>
+#include <linux/interrupt.h>
+
+#define MAX_MCI_SLOTS	2
+
+enum dw_mci_state {
+	STATE_IDLE = 0,
+	STATE_SENDING_CMD,
+	STATE_SENDING_DATA,
+	STATE_DATA_BUSY,
+	STATE_SENDING_STOP,
+	STATE_DATA_ERROR,
+	STATE_SENDING_CMD11,
+	STATE_WAITING_CMD11_DONE,
+};
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_XFER_COMPLETE,
+	EVENT_DATA_COMPLETE,
+	EVENT_DATA_ERROR,
+};
+
+enum dw_mci_cookie {
+	COOKIE_UNMAPPED,
+	COOKIE_PRE_MAPPED,	/* mapped by pre_req() of dwmmc */
+	COOKIE_MAPPED,		/* mapped by prepare_data() of dwmmc */
+};
+
+struct mmc_data;
+
+enum {
+	TRANS_MODE_PIO = 0,
+	TRANS_MODE_IDMAC,
+	TRANS_MODE_EDMAC
+};
+
+struct dw_mci_dma_slave {
+	struct dma_chan *ch;
+	enum dma_transfer_direction direction;
+};
+
+/**
+ * struct dw_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @irq_lock: Spinlock protecting the INTMASK setting.
+ * @regs: Pointer to MMIO registers.
+ * @fifo_reg: Pointer to MMIO registers for data FIFO
+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg_miter: PIO mapping scatterlist iterator.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ *	or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ *	transfer is in progress.
+ * @stop_abort: The command currently prepared for stoping transfer.
+ * @prev_blksz: The former transfer blksz record.
+ * @timing: Record of current ios timing.
+ * @use_dma: Whether DMA channel is initialized or not.
+ * @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
+ * @sg_dma: Bus address of DMA buffer.
+ * @sg_cpu: Virtual address of DMA buffer.
+ * @dma_ops: Pointer to platform-specific DMA callbacks.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ * @ring_size: Buffer size for idma descriptors.
+ *	command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @dms: structure of slave-dma private data.
+ * @phy_regs: physical address of controller's register map
+ * @data_status: Snapshot of SR taken upon completion of the current
+ *	data transfer. Only valid when EVENT_DATA_COMPLETE or
+ *	EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ *	to be sent.
+ * @dir_status: Direction of current transfer.
+ * @tasklet: Tasklet running the request state machine.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ *	to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ *	processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ *	rate and timeout calculations.
+ * @current_speed: Configured rate of the controller.
+ * @num_slots: Number of slots available.
+ * @fifoth_val: The value of FIFOTH register.
+ * @verid: Denote Version ID.
+ * @dev: Device associated with the MMC controller.
+ * @pdata: Platform data associated with the MMC controller.
+ * @drv_data: Driver specific data for identified variant of the controller
+ * @priv: Implementation defined private data.
+ * @biu_clk: Pointer to bus interface unit clock instance.
+ * @ciu_clk: Pointer to card interface unit clock instance.
+ * @slot: Slots sharing this MMC controller.
+ * @fifo_depth: depth of FIFO.
+ * @data_addr_override: override fifo reg offset with this value.
+ * @wm_aligned: force fifo watermark equal with data length in PIO mode.
+ *	Set as true if alignment is needed.
+ * @data_shift: log2 of FIFO item size.
+ * @part_buf_start: Start index in part_buf.
+ * @part_buf_count: Bytes of partial data in part_buf.
+ * @part_buf: Simple buffer for partial fifo reads/writes.
+ * @push_data: Pointer to FIFO push function.
+ * @pull_data: Pointer to FIFO pull function.
+ * @vqmmc_enabled: Status of vqmmc, should be true or false.
+ * @irq_flags: The flags to be passed to request_irq.
+ * @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
+ * @cmd11_timer: Timer for SD3.0 voltage switch over scheme.
+ * @dto_timer: Timer for broken data transfer over scheme.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * @irq_lock is an irq-safe spinlock protecting the INTMASK register
+ * to allow the interrupt handler to modify it directly.  Held for only long
+ * enough to read-modify-write INTMASK and no other locks are grabbed when
+ * holding this one.
+ *
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct dw_mci {
+	spinlock_t		lock;
+	spinlock_t		irq_lock;
+	void __iomem		*regs;
+	void __iomem		*fifo_reg;
+	u32			data_addr_override;
+	bool			wm_aligned;
+
+	struct scatterlist	*sg;
+	struct sg_mapping_iter	sg_miter;
+
+	struct dw_mci_slot	*cur_slot;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	stop_abort;
+	unsigned int		prev_blksz;
+	unsigned char		timing;
+
+	/* DMA interface members*/
+	int			use_dma;
+	int			using_dma;
+	int			dma_64bit_address;
+
+	dma_addr_t		sg_dma;
+	void			*sg_cpu;
+	const struct dw_mci_dma_ops	*dma_ops;
+	/* For idmac */
+	unsigned int		ring_size;
+
+	/* For edmac */
+	struct dw_mci_dma_slave *dms;
+	/* Registers's physical base address */
+	resource_size_t		phy_regs;
+
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_cmdr;
+	u32			dir_status;
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+	enum dw_mci_state	state;
+	struct list_head	queue;
+
+	u32			bus_hz;
+	u32			current_speed;
+	u32			num_slots;
+	u32			fifoth_val;
+	u16			verid;
+	struct device		*dev;
+	struct dw_mci_board	*pdata;
+	const struct dw_mci_drv_data	*drv_data;
+	void			*priv;
+	struct clk		*biu_clk;
+	struct clk		*ciu_clk;
+	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];
+
+	/* FIFO push and pull */
+	int			fifo_depth;
+	int			data_shift;
+	u8			part_buf_start;
+	u8			part_buf_count;
+	union {
+		u16		part_buf16;
+		u32		part_buf32;
+		u64		part_buf;
+	};
+	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
+	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
+
+	bool			vqmmc_enabled;
+	unsigned long		irq_flags; /* IRQ flags */
+	int			irq;
+
+	int			sdio_id0;
+
+	struct timer_list       cmd11_timer;
+	struct timer_list       dto_timer;
+};
+
+/* DMA ops for Internal/External DMAC interface */
+struct dw_mci_dma_ops {
+	/* DMA Ops */
+	int (*init)(struct dw_mci *host);
+	int (*start)(struct dw_mci *host, unsigned int sg_len);
+	void (*complete)(void *host);
+	void (*stop)(struct dw_mci *host);
+	void (*cleanup)(struct dw_mci *host);
+	void (*exit)(struct dw_mci *host);
+};
+
+struct dma_pdata;
+
+/* Board platform data */
+struct dw_mci_board {
+	u32 num_slots;
+
+	unsigned int bus_hz; /* Clock speed at the cclk_in pad */
+
+	u32 caps;	/* Capabilities */
+	u32 caps2;	/* More capabilities */
+	u32 pm_caps;	/* PM capabilities */
+	/*
+	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
+	 * but note that this may not be reliable after a bootloader has used
+	 * it.
+	 */
+	unsigned int fifo_depth;
+
+	/* delay in mS before detecting cards after interrupt */
+	u32 detect_delay_ms;
+
+	struct reset_control *rstc;
+	struct dw_mci_dma_ops *dma_ops;
+	struct dma_pdata *data;
+};
+
 #define DW_MMC_240A		0x240a
 #define DW_MMC_280A		0x280a
 

drivers/mmc/host/meson-gx-mmc.c

@@ -35,6 +35,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/regulator/consumer.h>
+#include <linux/interrupt.h>
 
 #define DRIVER_NAME "meson-gx-mmc"
 
@@ -82,6 +83,7 @@
 #define   CFG_RC_CC_MASK 0xf
 #define   CFG_STOP_CLOCK BIT(22)
 #define   CFG_CLK_ALWAYS_ON BIT(18)
+#define   CFG_CHK_DS BIT(20)
 #define   CFG_AUTO_CLK BIT(23)
 
 #define SD_EMMC_STATUS 0x48
@@ -131,7 +133,7 @@ struct meson_host {
 	struct clk_mux mux;
 	struct clk *mux_clk;
 	struct clk *mux_parent[MUX_CLK_NUM_PARENTS];
-	unsigned long mux_parent_rate[MUX_CLK_NUM_PARENTS];
+	unsigned long current_clock;
 
 	struct clk_divider cfg_div;
 	struct clk *cfg_div_clk;
@@ -178,7 +180,7 @@ struct sd_emmc_desc {
 static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
 {
 	struct mmc_host *mmc = host->mmc;
-	int ret = 0;
+	int ret;
 	u32 cfg;
 
 	if (clk_rate) {
@@ -188,7 +190,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
 			clk_rate = mmc->f_min;
 	}
 
-	if (clk_rate == mmc->actual_clock)
+	if (clk_rate == host->current_clock)
 		return 0;
 
 	/* stop clock */
@@ -201,29 +203,34 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
 	dev_dbg(host->dev, "change clock rate %u -> %lu\n",
 		mmc->actual_clock, clk_rate);
 
-	if (clk_rate == 0) {
+	if (!clk_rate) {
 		mmc->actual_clock = 0;
+		host->current_clock = 0;
+		/* return with clock being stopped */
 		return 0;
 	}
 
 	ret = clk_set_rate(host->cfg_div_clk, clk_rate);
-	if (ret)
-		dev_warn(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
-			 clk_rate, ret);
-	else if (clk_rate && clk_rate != clk_get_rate(host->cfg_div_clk))
-		dev_warn(host->dev, "divider requested rate %lu != actual rate %lu: ret=%d\n",
-			 clk_rate, clk_get_rate(host->cfg_div_clk), ret);
-	else
-		mmc->actual_clock = clk_rate;
-
-	/* (re)start clock, if non-zero */
-	if (!ret && clk_rate) {
-		cfg = readl(host->regs + SD_EMMC_CFG);
-		cfg &= ~CFG_STOP_CLOCK;
-		writel(cfg, host->regs + SD_EMMC_CFG);
+	if (ret) {
+		dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
+			clk_rate, ret);
+		return ret;
 	}
 
-	return ret;
+	mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
+	host->current_clock = clk_rate;
+
+	if (clk_rate != mmc->actual_clock)
+		dev_dbg(host->dev,
+			"divider requested rate %lu != actual rate %u\n",
+			clk_rate, mmc->actual_clock);
+
+	/* (re)start clock */
+	cfg = readl(host->regs + SD_EMMC_CFG);
+	cfg &= ~CFG_STOP_CLOCK;
+	writel(cfg, host->regs + SD_EMMC_CFG);
+
+	return 0;
 }
 
 /*
@@ -239,7 +246,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
 	const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
 	unsigned int mux_parent_count = 0;
 	const char *clk_div_parents[1];
-	unsigned int f_min = UINT_MAX;
 	u32 clk_reg, cfg;
 
 	/* get the mux parents */
@@ -256,20 +262,10 @@ static int meson_mmc_clk_init(struct meson_host *host)
 			return ret;
 		}
 
-		host->mux_parent_rate[i] = clk_get_rate(host->mux_parent[i]);
 		mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
 		mux_parent_count++;
-		if (host->mux_parent_rate[i] < f_min)
-			f_min = host->mux_parent_rate[i];
 	}
 
-	/* cacluate f_min based on input clocks, and max divider value */
-	if (f_min != UINT_MAX)
-		f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX);
-	else
-		f_min = 4000000;  /* default min: 400 MHz */
-	host->mmc->f_min = f_min;
-
 	/* create the mux */
 	snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
 	init.name = clk_name;
@@ -324,9 +320,13 @@ static int meson_mmc_clk_init(struct meson_host *host)
 	writel(cfg, host->regs + SD_EMMC_CFG);
 
 	ret = clk_prepare_enable(host->cfg_div_clk);
-	if (!ret)
-		ret = meson_mmc_clk_set(host, f_min);
+	if (ret)
+		return ret;
 
+	/* Get the nearest minimum clock to 400KHz */
+	host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
+
+	ret = meson_mmc_clk_set(host, host->mmc->f_min);
 	if (!ret)
 		clk_disable_unprepare(host->cfg_div_clk);
 
@@ -378,7 +378,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	meson_mmc_clk_set(host, ios->clock);
 
 	/* Bus width */
-	val = readl(host->regs + SD_EMMC_CFG);
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
 		bus_width = CFG_BUS_WIDTH_1;
@@ -393,7 +392,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		dev_err(host->dev, "Invalid ios->bus_width: %u.  Setting to 4.\n",
 			ios->bus_width);
 		bus_width = CFG_BUS_WIDTH_4;
-		return;
 	}
 
 	val = readl(host->regs + SD_EMMC_CFG);
@@ -411,6 +409,16 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
 	val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
 
+	val &= ~CFG_DDR;
+	if (ios->timing == MMC_TIMING_UHS_DDR50 ||
+	    ios->timing == MMC_TIMING_MMC_DDR52 ||
+	    ios->timing == MMC_TIMING_MMC_HS400)
+		val |= CFG_DDR;
+
+	val &= ~CFG_CHK_DS;
+	if (ios->timing == MMC_TIMING_MMC_HS400)
+		val |= CFG_CHK_DS;
+
 	writel(val, host->regs + SD_EMMC_CFG);
 
 	if (val != orig)
@@ -480,9 +488,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
 			blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
 			blk_len >>= CFG_BLK_LEN_SHIFT;
 			if (blk_len != ilog2(cmd->data->blksz)) {
-				dev_warn(host->dev, "%s: update blk_len %d -> %d\n",
+				dev_dbg(host->dev, "%s: update blk_len %d -> %d\n",
 					__func__, blk_len,
-					 ilog2(cmd->data->blksz));
+					ilog2(cmd->data->blksz));
 				blk_len = ilog2(cmd->data->blksz);
 				cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
 				cfg |= blk_len << CFG_BLK_LEN_SHIFT;
@@ -545,11 +553,6 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	/* Stop execution */
 	writel(0, host->regs + SD_EMMC_START);
 
-	/* clear, ack, enable all interrupts */
-	writel(0, host->regs + SD_EMMC_IRQ_EN);
-	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
-	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
-
 	host->mrq = mrq;
 
 	if (mrq->sbc)
@@ -669,7 +672,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	struct mmc_command *cmd = host->cmd;
 	struct mmc_data *data;
 	unsigned int xfer_bytes;
-	int ret = IRQ_HANDLED;
 
 	if (WARN_ON(!mrq))
 		return IRQ_NONE;
@@ -678,14 +680,12 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	data = cmd->data;
-	if (data) {
+	if (data && data->flags & MMC_DATA_READ) {
 		xfer_bytes = data->blksz * data->blocks;
-		if (data->flags & MMC_DATA_READ) {
-			WARN_ON(xfer_bytes > host->bounce_buf_size);
-			sg_copy_from_buffer(data->sg, data->sg_len,
-					    host->bounce_buf, xfer_bytes);
-			data->bytes_xfered = xfer_bytes;
-		}
+		WARN_ON(xfer_bytes > host->bounce_buf_size);
+		sg_copy_from_buffer(data->sg, data->sg_len,
+				    host->bounce_buf, xfer_bytes);
+		data->bytes_xfered = xfer_bytes;
 	}
 
 	meson_mmc_read_resp(host->mmc, cmd);
@@ -694,7 +694,7 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	else
 		meson_mmc_start_cmd(host->mmc, data->stop);
 
-	return ret;
+	return IRQ_HANDLED;
 }
 
 /*
@@ -742,7 +742,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
 
 	ret = mmc_of_parse(mmc);
 	if (ret) {
-		dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
 		goto free_host;
 	}
 
@@ -780,6 +781,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	/* clear, ack, enable all interrupts */
 	writel(0, host->regs + SD_EMMC_IRQ_EN);
 	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
+	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
 
 	ret = devm_request_threaded_irq(&pdev->dev, host->irq,
 					meson_mmc_irq, meson_mmc_irq_thread,
@@ -787,8 +789,11 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_host;
 
+	mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
+	mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
+
 	/* data bounce buffer */
-	host->bounce_buf_size = SZ_512K;
+	host->bounce_buf_size = mmc->max_req_size;
 	host->bounce_buf =
 		dma_alloc_coherent(host->dev, host->bounce_buf_size,
 				   &host->bounce_dma_addr, GFP_KERNEL);
@@ -814,12 +819,11 @@ static int meson_mmc_remove(struct platform_device *pdev)
 {
 	struct meson_host *host = dev_get_drvdata(&pdev->dev);
 
-	if (WARN_ON(!host))
-		return 0;
+	/* disable interrupts */
+	writel(0, host->regs + SD_EMMC_IRQ_EN);
 
-	if (host->bounce_buf)
-		dma_free_coherent(host->dev, host->bounce_buf_size,
-				  host->bounce_buf, host->bounce_dma_addr);
+	dma_free_coherent(host->dev, host->bounce_buf_size,
+			  host->bounce_buf, host->bounce_dma_addr);
 
 	clk_disable_unprepare(host->cfg_div_clk);
 	clk_disable_unprepare(host->core_clk);

drivers/mmc/host/mmci.c

@@ -507,6 +507,7 @@ static void mmci_dma_data_error(struct mmci_host *host)
 {
 	dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
 	dmaengine_terminate_all(host->dma_current);
+	host->dma_in_progress = false;
 	host->dma_current = NULL;
 	host->dma_desc_current = NULL;
 	host->data->host_cookie = 0;
@@ -565,6 +566,7 @@ static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
 		mmci_dma_release(host);
 	}
 
+	host->dma_in_progress = false;
 	host->dma_current = NULL;
 	host->dma_desc_current = NULL;
 }
@@ -665,6 +667,7 @@ static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl)
 	dev_vdbg(mmc_dev(host->mmc),
 		 "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n",
 		 data->sg_len, data->blksz, data->blocks, data->flags);
+	host->dma_in_progress = true;
 	dmaengine_submit(host->dma_desc_current);
 	dma_async_issue_pending(host->dma_current);
 
@@ -740,8 +743,10 @@ static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq,
 		if (host->dma_desc_current == next->dma_desc)
 			host->dma_desc_current = NULL;
 
-		if (host->dma_current == next->dma_chan)
+		if (host->dma_current == next->dma_chan) {
+			host->dma_in_progress = false;
 			host->dma_current = NULL;
+		}
 
 		next->dma_desc = NULL;
 		next->dma_chan = NULL;

drivers/mmc/host/mmci.h

@@ -245,8 +245,9 @@ struct mmci_host {
 	struct dma_chan		*dma_tx_channel;
 	struct dma_async_tx_descriptor	*dma_desc_current;
 	struct mmci_host_next	next_data;
+	bool			dma_in_progress;
 
-#define dma_inprogress(host)	((host)->dma_current)
+#define dma_inprogress(host)	((host)->dma_in_progress)
 #else
 #define dma_inprogress(host)	(0)
 #endif

drivers/mmc/host/mtk-sd.c

@@ -28,6 +28,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/interrupt.h>
 
 #include <linux/mmc/card.h>
 #include <linux/mmc/core.h>
@@ -1074,11 +1075,8 @@ static int msdc_card_busy(struct mmc_host *mmc)
 	struct msdc_host *host = mmc_priv(mmc);
 	u32 status = readl(host->base + MSDC_PS);
 
-	/* check if any pin between dat[0:3] is low */
-	if (((status >> 16) & 0xf) != 0xf)
-		return 1;
-
-	return 0;
+	/* only check if data0 is low */
+	return !(status & BIT(16));
 }
 
 static void msdc_request_timeout(struct work_struct *work)

drivers/mmc/host/mxs-mmc.c

@@ -153,7 +153,11 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
 		}
 	}
 
-	if (data) {
+	if (cmd == mrq->sbc) {
+		/* Finished CMD23, now send actual command. */
+		mxs_mmc_start_cmd(host, mrq->cmd);
+		return;
+	} else if (data) {
 		dma_unmap_sg(mmc_dev(host->mmc), data->sg,
 			     data->sg_len, ssp->dma_dir);
 		/*
@@ -166,7 +170,7 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
 			data->bytes_xfered = 0;
 
 		host->data = NULL;
-		if (mrq->stop) {
+		if (data->stop && (data->error || !mrq->sbc)) {
 			mxs_mmc_start_cmd(host, mrq->stop);
 			return;
 		}
@@ -495,7 +499,11 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	WARN_ON(host->mrq != NULL);
 	host->mrq = mrq;
-	mxs_mmc_start_cmd(host, mrq->cmd);
+
+	if (mrq->sbc)
+		mxs_mmc_start_cmd(host, mrq->sbc);
+	else
+		mxs_mmc_start_cmd(host, mrq->cmd);
 }
 
 static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -642,7 +650,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	/* set mmc core parameters */
 	mmc->ops = &mxs_mmc_ops;
 	mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
-		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
+		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL | MMC_CAP_CMD23;
 
 	host->broken_cd = of_property_read_bool(np, "broken-cd");
 

drivers/mmc/host/omap.c

@@ -893,7 +893,7 @@ static void mmc_omap_cover_handler(unsigned long param)
 	 * If no card is inserted, we postpone polling until
 	 * the cover has been closed.
 	 */
-	if (slot->mmc->card == NULL || !mmc_card_present(slot->mmc->card))
+	if (slot->mmc->card == NULL)
 		return;
 
 	mod_timer(&slot->cover_timer,

drivers/mmc/host/omap_hsmmc.c

@@ -1162,7 +1162,7 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
 	if (status & ERR_EN) {
 		omap_hsmmc_dbg_report_irq(host, status);
 
-		if (status & (CTO_EN | CCRC_EN))
+		if (status & (CTO_EN | CCRC_EN | CEB_EN))
 			end_cmd = 1;
 		if (host->data || host->response_busy) {
 			end_trans = !end_cmd;
@@ -1469,10 +1469,11 @@ static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
 }
 
 static void set_data_timeout(struct omap_hsmmc_host *host,
-			     unsigned int timeout_ns,
+			     unsigned long long timeout_ns,
 			     unsigned int timeout_clks)
 {
-	unsigned int timeout, cycle_ns;
+	unsigned long long timeout = timeout_ns;
+	unsigned int cycle_ns;
 	uint32_t reg, clkd, dto = 0;
 
 	reg = OMAP_HSMMC_READ(host->base, SYSCTL);
@@ -1481,7 +1482,7 @@ static void set_data_timeout(struct omap_hsmmc_host *host,
 		clkd = 1;
 
 	cycle_ns = 1000000000 / (host->clk_rate / clkd);
-	timeout = timeout_ns / cycle_ns;
+	do_div(timeout, cycle_ns);
 	timeout += timeout_clks;
 	if (timeout) {
 		while ((timeout & 0x80000000) == 0) {
@@ -1527,16 +1528,24 @@ static int
 omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
 {
 	int ret;
+	unsigned long long timeout;
+
 	host->data = req->data;
 
 	if (req->data == NULL) {
 		OMAP_HSMMC_WRITE(host->base, BLK, 0);
-		/*
-		 * Set an arbitrary 100ms data timeout for commands with
-		 * busy signal.
-		 */
-		if (req->cmd->flags & MMC_RSP_BUSY)
-			set_data_timeout(host, 100000000U, 0);
+		if (req->cmd->flags & MMC_RSP_BUSY) {
+			timeout = req->cmd->busy_timeout * NSEC_PER_MSEC;
+
+			/*
+			 * Set an arbitrary 100ms data timeout for commands with
+			 * busy signal and no indication of busy_timeout.
+			 */
+			if (!timeout)
+				timeout = 100000000U;
+
+			set_data_timeout(host, timeout, 0);
+		}
 		return 0;
 	}
 

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -707,7 +707,7 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
 		u8 opcode, u8 sample_point)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	err = sd_change_phase(host, sample_point, true);
 	if (err < 0)

drivers/mmc/host/rtsx_usb_sdmmc.c

@@ -682,7 +682,7 @@ static int sd_tuning_rx_cmd(struct rtsx_usb_sdmmc *host,
 		u8 opcode, u8 sample_point)
 {
 	int err;
-	struct mmc_command cmd = {0};
+	struct mmc_command cmd = {};
 
 	err = sd_change_phase(host, sample_point, 0);
 	if (err)

drivers/mmc/host/s3cmci.c

@@ -21,6 +21,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 

drivers/mmc/host/sdhci-acpi.c

@@ -467,7 +467,10 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
 		bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
 
-		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL)) {
+		err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL);
+		if (err) {
+			if (err == -EPROBE_DEFER)
+				goto err_free;
 			dev_warn(dev, "failed to setup card detect gpio\n");
 			c->use_runtime_pm = false;
 		}

drivers/mmc/host/sdhci-cadence.c

@@ -17,6 +17,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
 
 #include "sdhci-pltfm.h"
 
@@ -25,7 +26,7 @@
 #define   SDHCI_CDNS_HRS04_ACK			BIT(26)
 #define   SDHCI_CDNS_HRS04_RD			BIT(25)
 #define   SDHCI_CDNS_HRS04_WR			BIT(24)
-#define   SDHCI_CDNS_HRS04_RDATA_SHIFT		12
+#define   SDHCI_CDNS_HRS04_RDATA_SHIFT		16
 #define   SDHCI_CDNS_HRS04_WDATA_SHIFT		8
 #define   SDHCI_CDNS_HRS04_ADDR_SHIFT		0
 

drivers/mmc/host/sdhci-esdhc.h

@@ -24,30 +24,36 @@
 				SDHCI_QUIRK_PIO_NEEDS_DELAY | \
 				SDHCI_QUIRK_NO_HISPD_BIT)
 
-#define ESDHC_PROCTL		0x28
-
-#define ESDHC_SYSTEM_CONTROL	0x2c
-#define ESDHC_CLOCK_MASK	0x0000fff0
-#define ESDHC_PREDIV_SHIFT	8
-#define ESDHC_DIVIDER_SHIFT	4
-#define ESDHC_CLOCK_PEREN	0x00000004
-#define ESDHC_CLOCK_HCKEN	0x00000002
-#define ESDHC_CLOCK_IPGEN	0x00000001
-
 /* pltfm-specific */
 #define ESDHC_HOST_CONTROL_LE	0x20
 
 /*
- * P2020 interpretation of the SDHCI_HOST_CONTROL register
+ * eSDHC register definition
  */
-#define ESDHC_CTRL_4BITBUS          (0x1 << 1)
-#define ESDHC_CTRL_8BITBUS          (0x2 << 1)
-#define ESDHC_CTRL_BUSWIDTH_MASK    (0x3 << 1)
-
-/* OF-specific */
-#define ESDHC_DMA_SYSCTL	0x40c
-#define ESDHC_DMA_SNOOP		0x00000040
 
-#define ESDHC_HOST_CONTROL_RES	0x01
+/* Present State Register */
+#define ESDHC_PRSSTAT			0x24
+#define ESDHC_CLOCK_STABLE		0x00000008
+
+/* Protocol Control Register */
+#define ESDHC_PROCTL			0x28
+#define ESDHC_CTRL_4BITBUS		(0x1 << 1)
+#define ESDHC_CTRL_8BITBUS		(0x2 << 1)
+#define ESDHC_CTRL_BUSWIDTH_MASK	(0x3 << 1)
+#define ESDHC_HOST_CONTROL_RES		0x01
+
+/* System Control Register */
+#define ESDHC_SYSTEM_CONTROL		0x2c
+#define ESDHC_CLOCK_MASK		0x0000fff0
+#define ESDHC_PREDIV_SHIFT		8
+#define ESDHC_DIVIDER_SHIFT		4
+#define ESDHC_CLOCK_SDCLKEN		0x00000008
+#define ESDHC_CLOCK_PEREN		0x00000004
+#define ESDHC_CLOCK_HCKEN		0x00000002
+#define ESDHC_CLOCK_IPGEN		0x00000001
+
+/* Control Register for DMA transfer */
+#define ESDHC_DMA_SYSCTL		0x40c
+#define ESDHC_DMA_SNOOP			0x00000040
 
 #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */

drivers/mmc/host/sdhci-iproc.c

@@ -211,14 +211,19 @@ static const struct sdhci_iproc_data iproc_data = {
 static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-		  SDHCI_QUIRK_MISSING_CAPS,
+		  SDHCI_QUIRK_MISSING_CAPS |
+		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.ops = &sdhci_iproc_32only_ops,
 };
 
 static const struct sdhci_iproc_data bcm2835_data = {
 	.pdata = &sdhci_bcm2835_pltfm_data,
-	.caps = SDHCI_CAN_VDD_330,
-	.caps1 = 0x00000000,
+	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
+			& SDHCI_MAX_BLOCK_MASK) |
+		SDHCI_CAN_VDD_330 |
+		SDHCI_CAN_DO_HISPD,
+	.caps1 = SDHCI_DRIVER_TYPE_A |
+		 SDHCI_DRIVER_TYPE_C,
 	.mmc_caps = 0x00000000,
 };
 

drivers/mmc/host/sdhci-of-esdhc.c

@@ -431,6 +431,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	int pre_div = 1;
 	int div = 1;
+	u32 timeout;
 	u32 temp;
 
 	host->mmc->actual_clock = 0;
@@ -451,8 +452,8 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	}
 
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
-		| ESDHC_CLOCK_MASK);
+	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
+		  ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
 	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
@@ -472,7 +473,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 		| (div << ESDHC_DIVIDER_SHIFT)
 		| (pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
-	mdelay(1);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!(sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)) {
+		if (timeout == 0) {
+			pr_err("%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	temp |= ESDHC_CLOCK_SDCLKEN;
+	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 }
 
 static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
@@ -569,16 +584,19 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = {
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
-		| SDHCI_QUIRK_NO_CARD_NO_RESET
-		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+#ifdef CONFIG_PPC
+		  SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+#endif
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.ops = &sdhci_esdhc_be_ops,
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
-		| SDHCI_QUIRK_NO_CARD_NO_RESET
-		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.ops = &sdhci_esdhc_le_ops,
 };
 
@@ -643,8 +661,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
-	    of_device_is_compatible(np, "fsl,t1040-esdhc") ||
-	    of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+	    of_device_is_compatible(np, "fsl,t1040-esdhc"))
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 
 	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))

drivers/mmc/host/sdhci-pci-core.c

@@ -424,7 +424,6 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
 static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
 {
 	slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
-	slot->cd_con_id = NULL;
 	slot->cd_idx = 0;
 	slot->cd_override_level = true;
 	if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXT_SD ||
@@ -866,6 +865,86 @@ enum amd_chipset_gen {
 	AMD_CHIPSET_UNKNOWN,
 };
 
+/* AMD registers */
+#define AMD_SD_AUTO_PATTERN		0xB8
+#define AMD_MSLEEP_DURATION		4
+#define AMD_SD_MISC_CONTROL		0xD0
+#define AMD_MAX_TUNE_VALUE		0x0B
+#define AMD_AUTO_TUNE_SEL		0x10800
+#define AMD_FIFO_PTR			0x30
+#define AMD_BIT_MASK			0x1F
+
+static void amd_tuning_reset(struct sdhci_host *host)
+{
+	unsigned int val;
+
+	val = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	val |= SDHCI_CTRL_PRESET_VAL_ENABLE | SDHCI_CTRL_EXEC_TUNING;
+	sdhci_writew(host, val, SDHCI_HOST_CONTROL2);
+
+	val = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	val &= ~SDHCI_CTRL_EXEC_TUNING;
+	sdhci_writew(host, val, SDHCI_HOST_CONTROL2);
+}
+
+static void amd_config_tuning_phase(struct pci_dev *pdev, u8 phase)
+{
+	unsigned int val;
+
+	pci_read_config_dword(pdev, AMD_SD_AUTO_PATTERN, &val);
+	val &= ~AMD_BIT_MASK;
+	val |= (AMD_AUTO_TUNE_SEL | (phase << 1));
+	pci_write_config_dword(pdev, AMD_SD_AUTO_PATTERN, val);
+}
+
+static void amd_enable_manual_tuning(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	pci_read_config_dword(pdev, AMD_SD_MISC_CONTROL, &val);
+	val |= AMD_FIFO_PTR;
+	pci_write_config_dword(pdev, AMD_SD_MISC_CONTROL, val);
+}
+
+static int amd_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev = slot->chip->pdev;
+	u8 valid_win = 0;
+	u8 valid_win_max = 0;
+	u8 valid_win_end = 0;
+	u8 ctrl, tune_around;
+
+	amd_tuning_reset(host);
+
+	for (tune_around = 0; tune_around < 12; tune_around++) {
+		amd_config_tuning_phase(pdev, tune_around);
+
+		if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+			valid_win = 0;
+			msleep(AMD_MSLEEP_DURATION);
+			ctrl = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
+			sdhci_writeb(host, ctrl, SDHCI_SOFTWARE_RESET);
+		} else if (++valid_win > valid_win_max) {
+			valid_win_max = valid_win;
+			valid_win_end = tune_around;
+		}
+	}
+
+	if (!valid_win_max) {
+		dev_err(&pdev->dev, "no tuning point found\n");
+		return -EIO;
+	}
+
+	amd_config_tuning_phase(pdev, valid_win_end - valid_win_max / 2);
+
+	amd_enable_manual_tuning(pdev);
+
+	host->mmc->retune_period = 0;
+
+	return 0;
+}
+
 static int amd_probe(struct sdhci_pci_chip *chip)
 {
 	struct pci_dev	*smbus_dev;
@@ -888,16 +967,24 @@ static int amd_probe(struct sdhci_pci_chip *chip)
 		}
 	}
 
-	if ((gen == AMD_CHIPSET_BEFORE_ML) || (gen == AMD_CHIPSET_CZ)) {
+	if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ)
 		chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
-		chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
-	}
 
 	return 0;
 }
 
+static const struct sdhci_ops amd_sdhci_pci_ops = {
+	.set_clock			= sdhci_set_clock,
+	.enable_dma			= sdhci_pci_enable_dma,
+	.set_bus_width			= sdhci_pci_set_bus_width,
+	.reset				= sdhci_reset,
+	.set_uhs_signaling		= sdhci_set_uhs_signaling,
+	.platform_execute_tuning	= amd_execute_tuning,
+};
+
 static const struct sdhci_pci_fixes sdhci_amd = {
 	.probe		= amd_probe,
+	.ops		= &amd_sdhci_pci_ops,
 };
 
 static const struct pci_device_id pci_ids[] = {
@@ -1817,7 +1904,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 	host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
 
 	if (slot->cd_idx >= 0) {
-		ret = mmc_gpiod_request_cd(host->mmc, slot->cd_con_id, slot->cd_idx,
+		ret = mmc_gpiod_request_cd(host->mmc, NULL, slot->cd_idx,
 					   slot->cd_override_level, 0, NULL);
 		if (ret == -EPROBE_DEFER)
 			goto remove;