ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10

Add the required clock fields for all the I2C nodes. Also add missing clock
fields for UART0 and USB1.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -519,6 +519,7 @@ i2c0: i2c@ffc02200 {
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02200 0x100>;
 			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -528,6 +529,7 @@ i2c1: i2c@ffc02300 {
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02300 0x100>;
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -537,6 +539,7 @@ i2c2: i2c@ffc02400 {
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02400 0x100>;
 			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -546,6 +549,7 @@ i2c3: i2c@ffc02500 {
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02500 0x100>;
 			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -555,6 +559,7 @@ i2c4: i2c@ffc02600 {
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02600 0x100>;
 			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -658,6 +663,7 @@ uart0: serial0@ffc02000 {
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -692,6 +698,8 @@ usb1: usb@ffb40000 {
 			compatible = "snps,dwc2";
 			reg = <0xffb40000 0xffff>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";