Commit e7ee96df authored by Darrick J. Wong's avatar Darrick J. Wong

xfs: remove all *_ITER_ABORT values

Use -ECANCELED to signal "stop iterating" instead of these magical
*_ITER_ABORT values, since it's duplicative.
Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
parent 7f313eda
......@@ -4598,7 +4598,7 @@ xfs_btree_simple_query_range(
/* Callback */
error = fn(cur, recp, priv);
if (error < 0 || error == XFS_BTREE_QUERY_RANGE_ABORT)
if (error)
break;
advloop:
......@@ -4700,8 +4700,7 @@ xfs_btree_overlapped_query_range(
*/
if (ldiff >= 0 && hdiff >= 0) {
error = fn(cur, recp, priv);
if (error < 0 ||
error == XFS_BTREE_QUERY_RANGE_ABORT)
if (error)
break;
} else if (hdiff < 0) {
/* Record is larger than high key; pop. */
......@@ -4772,8 +4771,7 @@ xfs_btree_overlapped_query_range(
* Query a btree for all records overlapping a given interval of keys. The
* supplied function will be called with each record found; return one of the
* XFS_BTREE_QUERY_RANGE_{CONTINUE,ABORT} values or the usual negative error
* code. This function returns XFS_BTREE_QUERY_RANGE_ABORT, zero, or a
* negative error code.
* code. This function returns -ECANCELED, zero, or a negative error code.
*/
int
xfs_btree_query_range(
......@@ -4889,7 +4887,7 @@ xfs_btree_has_record_helper(
union xfs_btree_rec *rec,
void *priv)
{
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
}
/* Is there a record covering a given range of keys? */
......@@ -4904,7 +4902,7 @@ xfs_btree_has_record(
error = xfs_btree_query_range(cur, low, high,
&xfs_btree_has_record_helper, NULL);
if (error == XFS_BTREE_QUERY_RANGE_ABORT) {
if (error == -ECANCELED) {
*exists = true;
return 0;
}
......
......@@ -464,9 +464,14 @@ xfs_failaddr_t xfs_btree_lblock_verify(struct xfs_buf *bp,
uint xfs_btree_compute_maxlevels(uint *limits, unsigned long len);
unsigned long long xfs_btree_calc_size(uint *limits, unsigned long long len);
/* return codes */
/*
* Return codes for the query range iterator function are 0 to continue
* iterating, and non-zero to stop iterating. Any non-zero value will be
* passed up to the _query_range caller. The special value -ECANCELED can be
* used to stop iteration, because _query_range never generates that error
* code on its own.
*/
#define XFS_BTREE_QUERY_RANGE_CONTINUE (XFS_ITER_CONTINUE) /* keep iterating */
#define XFS_BTREE_QUERY_RANGE_ABORT (XFS_ITER_ABORT) /* stop iterating */
typedef int (*xfs_btree_query_range_fn)(struct xfs_btree_cur *cur,
union xfs_btree_rec *rec, void *priv);
......
......@@ -261,7 +261,7 @@ xfs_rmap_find_left_neighbor_helper(
*info->irec = *rec;
*info->stat = 1;
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
}
/*
......@@ -304,7 +304,7 @@ xfs_rmap_find_left_neighbor(
error = xfs_rmap_query_range(cur, &info.high, &info.high,
xfs_rmap_find_left_neighbor_helper, &info);
if (error == XFS_BTREE_QUERY_RANGE_ABORT)
if (error == -ECANCELED)
error = 0;
if (*stat)
trace_xfs_rmap_find_left_neighbor_result(cur->bc_mp,
......@@ -338,7 +338,7 @@ xfs_rmap_lookup_le_range_helper(
*info->irec = *rec;
*info->stat = 1;
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
}
/*
......@@ -376,7 +376,7 @@ xfs_rmap_lookup_le_range(
cur->bc_private.a.agno, bno, 0, owner, offset, flags);
error = xfs_rmap_query_range(cur, &info.high, &info.high,
xfs_rmap_lookup_le_range_helper, &info);
if (error == XFS_BTREE_QUERY_RANGE_ABORT)
if (error == -ECANCELED)
error = 0;
if (*stat)
trace_xfs_rmap_lookup_le_range_result(cur->bc_mp,
......@@ -2509,7 +2509,7 @@ xfs_rmap_has_other_keys_helper(
((rks->flags & rec->rm_flags) & XFS_RMAP_KEY_FLAGS) == rks->flags)
return 0;
rks->has_rmap = true;
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
}
/*
......
......@@ -180,7 +180,4 @@ struct xfs_ino_geometry {
/* Keep iterating the data structure. */
#define XFS_ITER_CONTINUE (0)
/* Stop iterating the data structure. */
#define XFS_ITER_ABORT (1)
#endif /* __XFS_SHARED_H__ */
......@@ -639,7 +639,7 @@ xchk_agfl_block(
xchk_agfl_block_xref(sc, agbno);
if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT)
return XFS_ITER_ABORT;
return -ECANCELED;
return 0;
}
......@@ -730,7 +730,7 @@ xchk_agfl(
/* Check the blocks in the AGFL. */
error = xfs_agfl_walk(sc->mp, XFS_BUF_TO_AGF(sc->sa.agf_bp),
sc->sa.agfl_bp, xchk_agfl_block, &sai);
if (error == XFS_ITER_ABORT) {
if (error == -ECANCELED) {
error = 0;
goto out_free;
}
......
......@@ -173,7 +173,7 @@ xchk_xattr_listent(
args.blkno);
fail_xref:
if (sx->sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT)
context->seen_enough = XFS_ITER_ABORT;
context->seen_enough = 1;
return;
}
......
......@@ -522,7 +522,7 @@ xchk_bmap_check_rmap(
out:
if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT)
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
return 0;
}
......@@ -551,7 +551,7 @@ xchk_bmap_check_ag_rmaps(
sbcri.sc = sc;
sbcri.whichfork = whichfork;
error = xfs_rmap_query_all(cur, xchk_bmap_check_rmap, &sbcri);
if (error == XFS_BTREE_QUERY_RANGE_ABORT)
if (error == -ECANCELED)
error = 0;
xfs_btree_del_cursor(cur, error);
......
......@@ -664,7 +664,7 @@ xrep_findroot_agfl_walk(
{
xfs_agblock_t *agbno = priv;
return (*agbno == bno) ? XFS_ITER_ABORT : 0;
return (*agbno == bno) ? -ECANCELED : 0;
}
/* Does this block match the btree information passed in? */
......@@ -694,7 +694,7 @@ xrep_findroot_block(
if (owner == XFS_RMAP_OWN_AG) {
error = xfs_agfl_walk(mp, ri->agf, ri->agfl_bp,
xrep_findroot_agfl_walk, &agbno);
if (error == XFS_ITER_ABORT)
if (error == -ECANCELED)
return 0;
if (error)
return error;
......
......@@ -1239,7 +1239,7 @@ xfs_qm_exit(void)
/*
* Iterate every dquot of a particular type. The caller must ensure that the
* particular quota type is active. iter_fn can return negative error codes,
* or XFS_ITER_ABORT to indicate that it wants to stop iterating.
* or -ECANCELED to indicate that it wants to stop iterating.
*/
int
xfs_qm_dqiterate(
......
......@@ -276,7 +276,7 @@ xfs_getfsmap_helper(
*/
if (rec_daddr > info->next_daddr) {
if (info->head->fmh_entries >= info->head->fmh_count)
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
fmr.fmr_device = info->dev;
fmr.fmr_physical = info->next_daddr;
......@@ -295,7 +295,7 @@ xfs_getfsmap_helper(
/* Fill out the extent we found */
if (info->head->fmh_entries >= info->head->fmh_count)
return XFS_BTREE_QUERY_RANGE_ABORT;
return -ECANCELED;
trace_xfs_fsmap_mapping(mp, info->dev, info->agno, rec);
......
......@@ -831,7 +831,7 @@ xfs_bulkstat_fmt(
/*
* Check the incoming bulk request @hdr from userspace and initialize the
* internal @breq bulk request appropriately. Returns 0 if the bulk request
* should proceed; XFS_ITER_ABORT if there's nothing to do; or the usual
* should proceed; -ECANCELED if there's nothing to do; or the usual
* negative error code.
*/
static int
......@@ -889,13 +889,13 @@ xfs_bulk_ireq_setup(
/* Asking for an inode past the end of the AG? We're done! */
if (XFS_INO_TO_AGNO(mp, breq->startino) > hdr->agno)
return XFS_ITER_ABORT;
return -ECANCELED;
} else if (hdr->agno)
return -EINVAL;
/* Asking for an inode past the end of the FS? We're done! */
if (XFS_INO_TO_AGNO(mp, breq->startino) >= mp->m_sb.sb_agcount)
return XFS_ITER_ABORT;
return -ECANCELED;
return 0;
}
......@@ -936,7 +936,7 @@ xfs_ioc_bulkstat(
return -EFAULT;
error = xfs_bulk_ireq_setup(mp, &hdr, &breq, arg->bulkstat);
if (error == XFS_ITER_ABORT)
if (error == -ECANCELED)
goto out_teardown;
if (error < 0)
return error;
......@@ -986,7 +986,7 @@ xfs_ioc_inumbers(
return -EFAULT;
error = xfs_bulk_ireq_setup(mp, &hdr, &breq, arg->inumbers);
if (error == XFS_ITER_ABORT)
if (error == -ECANCELED)
goto out_teardown;
if (error < 0)
return error;
......@@ -1881,7 +1881,7 @@ xfs_ioc_getfsmap(
info.mp = ip->i_mount;
info.data = arg;
error = xfs_getfsmap(ip->i_mount, &xhead, xfs_getfsmap_format, &info);
if (error == XFS_BTREE_QUERY_RANGE_ABORT) {
if (error == -ECANCELED) {
error = 0;
aborted = true;
} else if (error)
......
......@@ -137,7 +137,7 @@ xfs_bulkstat_one_int(
xfs_irele(ip);
error = bc->formatter(bc->breq, buf);
if (error == XFS_IBULK_ABORT)
if (error == -ECANCELED)
goto out_advance;
if (error)
goto out;
......@@ -181,7 +181,7 @@ xfs_bulkstat_one(
* If we reported one inode to userspace then we abort because we hit
* the end of the buffer. Don't leak that back to userspace.
*/
if (error == XFS_IWALK_ABORT)
if (error == -ECANCELED)
error = 0;
return error;
......@@ -342,7 +342,7 @@ xfs_inumbers_walk(
int error;
error = ic->formatter(ic->breq, &inogrp);
if (error && error != XFS_IBULK_ABORT)
if (error && error != -ECANCELED)
return error;
ic->breq->startino = XFS_AGINO_TO_INO(mp, agno, irec->ir_startino) +
......
......@@ -18,9 +18,6 @@ struct xfs_ibulk {
/* Only iterate within the same AG as startino */
#define XFS_IBULK_SAME_AG (XFS_IWALK_SAME_AG)
/* Return value that means we want to abort the walk. */
#define XFS_IBULK_ABORT (XFS_IWALK_ABORT)
/*
* Advance the user buffer pointer by one record of the given size. If the
* buffer is now full, return the appropriate error code.
......@@ -34,13 +31,21 @@ xfs_ibulk_advance(
breq->ubuffer = b + bytes;
breq->ocount++;
return breq->ocount == breq->icount ? XFS_IBULK_ABORT : 0;
return breq->ocount == breq->icount ? -ECANCELED : 0;
}
/*
* Return stat information in bulk (by-inode) for the filesystem.
*/
/*
* Return codes for the formatter function are 0 to continue iterating, and
* non-zero to stop iterating. Any non-zero value will be passed up to the
* bulkstat/inumbers caller. The special value -ECANCELED can be used to stop
* iteration, as neither bulkstat nor inumbers will ever generate that error
* code on their own.
*/
typedef int (*bulkstat_one_fmt_pf)(struct xfs_ibulk *breq,
const struct xfs_bulkstat *bstat);
......
......@@ -31,7 +31,7 @@
* inode it finds, it calls a walk function with the relevant inode number and
* a pointer to caller-provided data. The walk function can return the usual
* negative error code to stop the iteration; 0 to continue the iteration; or
* XFS_IWALK_ABORT to stop the iteration. This return value is returned to the
* -ECANCELED to stop the iteration. This return value is returned to the
* caller.
*
* Internally, we allow the walk function to do anything, which means that we
......
......@@ -6,12 +6,19 @@
#ifndef __XFS_IWALK_H__
#define __XFS_IWALK_H__
/*
* Return codes for the inode/inobt walk function are 0 to continue iterating,
* and non-zero to stop iterating. Any non-zero value will be passed up to the
* iwalk or inobt_walk caller. The special value -ECANCELED can be used to
* stop iteration, as neither iwalk nor inobt_walk will ever generate that
* error code on their own.
*/
/* Walk all inodes in the filesystem starting from @startino. */
typedef int (*xfs_iwalk_fn)(struct xfs_mount *mp, struct xfs_trans *tp,
xfs_ino_t ino, void *data);
/* Return values for xfs_iwalk_fn. */
#define XFS_IWALK_CONTINUE (XFS_ITER_CONTINUE)
#define XFS_IWALK_ABORT (XFS_ITER_ABORT)
int xfs_iwalk(struct xfs_mount *mp, struct xfs_trans *tp, xfs_ino_t startino,
unsigned int flags, xfs_iwalk_fn iwalk_fn,
......@@ -30,8 +37,6 @@ typedef int (*xfs_inobt_walk_fn)(struct xfs_mount *mp, struct xfs_trans *tp,
xfs_agnumber_t agno,
const struct xfs_inobt_rec_incore *irec,
void *data);
/* Return value (for xfs_inobt_walk_fn) that aborts the walk immediately. */
#define XFS_INOBT_WALK_ABORT (XFS_IWALK_ABORT)
int xfs_inobt_walk(struct xfs_mount *mp, struct xfs_trans *tp,
xfs_ino_t startino, unsigned int flags,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment