media: vsp1: Support Interlaced display pipelines

Calculate the top and bottom fields for the interlaced frames and
utilise the extended display list command feature to implement the
auto-field operations. This allows the DU to update the VSP2 registers
dynamically based upon the currently processing field.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/vsp1/vsp1_dl.c

@@ -947,6 +947,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool internal)
  */
 unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
 {
+	struct vsp1_device *vsp1 = dlm->vsp1;
+	u32 status = vsp1_read(vsp1, VI6_STATUS);
 	unsigned int flags = 0;
 
 	spin_lock(&dlm->lock);
@@ -971,6 +973,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
 	if (vsp1_dl_list_hw_update_pending(dlm))
 		goto done;
 
+	/*
+	 * Progressive streams report only TOP fields. If we have a BOTTOM
+	 * field, we are interlaced, and expect the frame to complete on the
+	 * next frame end interrupt.
+	 */
+	if (status & VI6_STATUS_FLD_STD(dlm->index))
+		goto done;
+
 	/*
 	 * The device starts processing the queued display list right after the
 	 * frame end interrupt. The display list thus becomes active.

drivers/media/platform/vsp1/vsp1_drm.c

@@ -670,9 +670,11 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 
 	drm_pipe->width = cfg->width;
 	drm_pipe->height = cfg->height;
+	pipe->interlaced = cfg->interlaced;
 
-	dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
-		__func__, pipe_index, cfg->width, cfg->height);
+	dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u%s\n",
+		__func__, pipe_index, cfg->width, cfg->height,
+		pipe->interlaced ? "i" : "");
 
 	mutex_lock(&vsp1->drm->lock);
 

drivers/media/platform/vsp1/vsp1_pipe.h

@@ -104,6 +104,7 @@ struct vsp1_partition {
  * @entities: list of entities in the pipeline
  * @stream_config: cached stream configuration for video pipelines
  * @configured: when false the @stream_config shall be written to the hardware
+ * @interlaced: True when the pipeline is configured in interlaced mode
  * @partitions: The number of partitions used to process one frame
  * @partition: The current partition for configuration to process
  * @part_table: The pre-calculated partitions used by the pipeline
@@ -142,6 +143,7 @@ struct vsp1_pipeline {
 
 	struct vsp1_dl_body *stream_config;
 	bool configured;
+	bool interlaced;
 
 	unsigned int partitions;
 	struct vsp1_partition *partition;

drivers/media/platform/vsp1/vsp1_regs.h

@@ -28,6 +28,7 @@
 #define VI6_SRESET_SRTS(n)		(1 << (n))
 
 #define VI6_STATUS			0x0038
+#define VI6_STATUS_FLD_STD(n)		(1 << ((n) + 28))
 #define VI6_STATUS_SYS_ACT(n)		(1 << ((n) + 8))
 
 #define VI6_WPF_IRQ_ENB(n)		(0x0048 + (n) * 12)
@@ -80,6 +81,8 @@
 #define VI6_DL_EXT_CTRL_EXPRI		(1 << 4)
 #define VI6_DL_EXT_CTRL_EXT		(1 << 0)
 
+#define VI6_DL_EXT_AUTOFLD_INT		BIT(0)
+
 #define VI6_DL_BODY_SIZE		0x0120
 #define VI6_DL_BODY_SIZE_UPD		(1 << 24)
 #define VI6_DL_BODY_SIZE_BS_MASK	(0x1ffff << 0)

drivers/media/platform/vsp1/vsp1_rpf.c

@@ -20,6 +20,18 @@
 #define RPF_MAX_WIDTH				8190
 #define RPF_MAX_HEIGHT				8190
 
+/* Pre extended display list command data structure. */
+struct vsp1_extcmd_auto_fld_body {
+	u32 top_y0;
+	u32 bottom_y0;
+	u32 top_c0;
+	u32 bottom_c0;
+	u32 top_c1;
+	u32 bottom_c1;
+	u32 reserved0;
+	u32 reserved1;
+} __packed;
+
 /* -----------------------------------------------------------------------------
  * Device Access
  */
@@ -64,6 +76,14 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
 		pstride |= format->plane_fmt[1].bytesperline
 			<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
 
+	/*
+	 * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
+	 * of pstride by 2 is conveniently OK here as we are multiplying both
+	 * values.
+	 */
+	if (pipe->interlaced)
+		pstride *= 2;
+
 	vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
 
 	/* Format */
@@ -100,6 +120,9 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
 		top = compose->top;
 	}
 
+	if (pipe->interlaced)
+		top /= 2;
+
 	vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
 		       (left << VI6_RPF_LOC_HCOORD_SHIFT) |
 		       (top << VI6_RPF_LOC_VCOORD_SHIFT));
@@ -169,6 +192,36 @@ static void rpf_configure_stream(struct vsp1_entity *entity,
 
 }
 
+static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
+				       struct vsp1_dl_list *dl)
+{
+	const struct v4l2_pix_format_mplane *format = &rpf->format;
+	struct vsp1_dl_ext_cmd *cmd;
+	struct vsp1_extcmd_auto_fld_body *auto_fld;
+	u32 offset_y, offset_c;
+
+	cmd = vsp1_dl_get_pre_cmd(dl);
+	if (WARN_ONCE(!cmd, "Failed to obtain an autofld cmd"))
+		return;
+
+	/* Re-index our auto_fld to match the current RPF. */
+	auto_fld = cmd->data;
+	auto_fld = &auto_fld[rpf->entity.index];
+
+	auto_fld->top_y0 = rpf->mem.addr[0];
+	auto_fld->top_c0 = rpf->mem.addr[1];
+	auto_fld->top_c1 = rpf->mem.addr[2];
+
+	offset_y = format->plane_fmt[0].bytesperline;
+	offset_c = format->plane_fmt[1].bytesperline;
+
+	auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
+	auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
+	auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
+
+	cmd->flags |= VI6_DL_EXT_AUTOFLD_INT | BIT(16 + rpf->entity.index);
+}
+
 static void rpf_configure_frame(struct vsp1_entity *entity,
 				struct vsp1_pipeline *pipe,
 				struct vsp1_dl_list *dl,
@@ -221,6 +274,11 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
 		crop.left += pipe->partition->rpf.left;
 	}
 
+	if (pipe->interlaced) {
+		crop.height = round_down(crop.height / 2, fmtinfo->vsub);
+		crop.top = round_down(crop.top / 2, fmtinfo->vsub);
+	}
+
 	vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
 		       (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
 		       (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
@@ -249,9 +307,17 @@ static void rpf_configure_partition(struct vsp1_entity *entity,
 	    fmtinfo->swap_uv)
 		swap(mem.addr[1], mem.addr[2]);
 
-	vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
-	vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
-	vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+	/*
+	 * Interlaced pipelines will use the extended pre-cmd to process
+	 * SRCM_ADDR_{Y,C0,C1}
+	 */
+	if (pipe->interlaced) {
+		vsp1_rpf_configure_autofld(rpf, dl);
+	} else {
+		vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
+		vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
+		vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
+	}
 }
 
 static void rpf_partition(struct vsp1_entity *entity,

include/media/vsp1.h

@@ -25,6 +25,7 @@ int vsp1_du_init(struct device *dev);
  * struct vsp1_du_lif_config - VSP LIF configuration
  * @width: output frame width
  * @height: output frame height
+ * @interlaced: true for interlaced pipelines
  * @callback: frame completion callback function (optional). When a callback
  *	      is provided, the VSP driver guarantees that it will be called once
  *	      and only once for each vsp1_du_atomic_flush() call.
@@ -33,6 +34,7 @@ int vsp1_du_init(struct device *dev);
 struct vsp1_du_lif_config {
 	unsigned int width;
 	unsigned int height;
+	bool interlaced;
 
 	void (*callback)(void *data, bool completed, u32 crc);
 	void *callback_data;