ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected

With the omap1 SPARSE_IRQ changes mach/irqs.h is no longer
automatically included. Turns out now we rely on ARCH_OMAP15XX
including hardware.h from memory.h, so without ARCH_OMAP15XX
we get build failures.

As we have legacy drivers still relying on these indirect
includes, let's not add more mach includes to the drivers.
Those have to be removed anyways for multiplatform support.

Let's fix up mach-omap1 to include soc.h where cpu_is_omap
checks are done, and common.h for board-*.c files.

But let's keep the indirect memory.h include for now to avoid
unnecessary churn in the drivers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-h3-mmc.c

@@ -16,6 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
+#include "common.h"
 #include "board-h3.h"
 #include "mmc.h"
 

arch/arm/mach-omap1/common.h

@@ -36,6 +36,8 @@
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
 #else

arch/arm/mach-omap1/gpio16xx.c

@@ -21,6 +21,8 @@
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #define OMAP1610_GPIO1_BASE		0xfffbe400
 #define OMAP1610_GPIO2_BASE		0xfffbec00
 #define OMAP1610_GPIO3_BASE		0xfffbb400

arch/arm/mach-omap1/gpio7xx.c

@@ -21,6 +21,8 @@
 
 #include <mach/irqs.h>
 
+#include "soc.h"
+
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
 #define OMAP7XX_GPIO2_BASE		0xfffbc800
 #define OMAP7XX_GPIO3_BASE		0xfffbd000

arch/arm/mach-omap1/include/mach/memory.h

@@ -5,6 +5,9 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+/* REVISIT: omap1 legacy drivers still rely on this */
+#include <mach/soc.h>
+
 /*
  * Bus address is physical address, except for OMAP-1510 Local Bus.
  * OMAP-1510 bus address is translated into a Local Bus address if the
@@ -14,7 +17,6 @@
  * because of the strncmp().
  */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <mach/soc.h>
 
 /*
  * OMAP-1510 Local Bus address offset

arch/arm/mach-omap1/pm.c

@@ -62,6 +62,7 @@
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
+#include "soc.h"
 #include "sram.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];

arch/arm/mach-omap1/serial.c

@@ -25,6 +25,7 @@
 #include <mach/mux.h>
 
 #include "pm.h"
+#include "soc.h"
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;