Commit ea5a4e20 authored by Ben Dooks's avatar Ben Dooks

ARM: Merge for-2635-4/s5pv210-boards

Merge branch 'for-2635-4/s5pv210-boards' into for-2635-4/partial1

Conflicts:
	arch/arm/mach-s5pv210/include/mach/map.h
parents fac3d355 eff4c74d
......@@ -17,10 +17,50 @@ config CPU_S5PV210
help
Enable S5PV210 CPU support
choice
prompt "Select machine type"
depends on ARCH_S5PV210
default MACH_SMDKV210
config S5PV210_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S5PV210_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
config S5PV210_SETUP_FB_24BPP
bool
help
Common setup code for S5PV210 with an 24bpp RGB display helper.
config S5PV210_SETUP_SDHCI
bool
select S5PV210_SETUP_SDHCI_GPIO
help
Internal helper functions for S5PV210 based SDHCI systems
config S5PV210_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
# machine support
config MACH_AQUILA
bool "Samsung Aquila"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
select S3C_DEV_FB
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
config MACH_GONI
bool "GONI"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
config MACH_SMDKV210
bool "SMDKV210"
......@@ -39,6 +79,4 @@ config MACH_SMDKC110
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
endchoice
endif
......@@ -17,9 +17,16 @@ obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
# machine support
obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
obj-$(CONFIG_MACH_GONI) += mach-goni.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
......@@ -32,6 +32,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pv210.h>
#include <plat/iic-core.h>
#include <plat/sdhci.h>
/* Initial IO mappings */
......@@ -77,6 +79,16 @@ void __init s5pv210_map_io(void)
s3c_device_adc.name = "s3c64xx-adc";
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
/* initialise device information early */
s5pv210_default_sdhci0();
s5pv210_default_sdhci1();
s5pv210_default_sdhci2();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
}
void __init s5pv210_init_clocks(int xtal)
......
......@@ -134,4 +134,9 @@
#define EINT_GPIO_2(x) S5PV210_GPH2(x)
#define EINT_GPIO_3(x) S5PV210_GPH3(x)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
#define IRQ_LCD_SYSTEM IRQ_LCD2
#endif /* ASM_ARCH_IRQS_H */
......@@ -26,6 +26,8 @@
#define S5P_PA_GPIO S5PV210_PA_GPIO
#define S5PV210_PA_IIC0 (0xE1800000)
#define S5PV210_PA_IIC1 (0xFAB00000)
#define S5PV210_PA_IIC2 (0xE1A00000)
#define S5PV210_PA_TIMER (0xE2500000)
#define S5P_PA_TIMER S5PV210_PA_TIMER
......@@ -47,6 +49,10 @@
#define S5PV210_PA_PDMA0 0xE0900000
#define S5PV210_PA_PDMA1 0xE0A00000
#define S5PV210_PA_FB (0xF8000000)
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_VIC0 (0xF2000000)
#define S5P_PA_VIC0 S5PV210_PA_VIC0
......@@ -79,7 +85,14 @@
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
#define S3C_PA_IIC S5PV210_PA_IIC0
#define S3C_PA_IIC1 S5PV210_PA_IIC1
#define S3C_PA_IIC2 S5PV210_PA_IIC2
#define S3C_PA_FB S5PV210_PA_FB
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#endif /* __ASM_ARCH_MAP_H */
......@@ -126,6 +126,7 @@
#define S5P_RST_STAT S5P_CLKREG(0xA000)
#define S5P_OSC_CON S5P_CLKREG(0x8000)
#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
......
/* linux/arch/arm/mach-s5pv210/mach-aquila.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
};
/* Frame Buffer */
static struct s3c_fb_pd_win aquila_fb_win0 = {
.win_mode = {
.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 2,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_pd_win aquila_fb_win1 = {
.win_mode = {
.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 2,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
.win[0] = &aquila_fb_win0,
.win[1] = &aquila_fb_win1,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
static struct platform_device *aquila_devices[] __initdata = {
&s3c_device_fb,
};
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
}
static void __init aquila_machine_init(void)
{
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
}
MACHINE_START(AQUILA, "Aquila")
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
/* linux/arch/arm/mach-s5pv210/mach-goni.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
};
static struct platform_device *goni_devices[] __initdata = {
};
static void __init goni_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
}
static void __init goni_machine_init(void)
{
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
MACHINE_START(GONI, "GONI")
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Base s5pv210 setup information for 24bpp LCD framebuffer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <mach/regs-fb.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
void s5pv210_fb_gpio_setup_24bpp(void)
{
unsigned int gpio = 0;
for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
/* Set DISPLAY_CONTROL register for Display path selection.
*
* ouput | RGB | I80 | ITU
* -----------------------------------
* 00 | MIE | FIMD | FIMD
* 01 | MDNIE | MDNIE | FIMD
* 10 | FIMD | FIMD | FIMD
* 11 | FIMD | FIMD | FIMD
*/
writel(0x2, S5P_MDNIE_SEL);
}
/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C0 GPIO configuration.
......@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
/* Will be populated later */
s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
}
/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C1 GPIO configuration.
*
* Based on plat-s3c64xx/setup-i2c1.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
}
/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C2 GPIO configuration.
*
* Based on plat-s3c64xx/setup-i2c0.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
}
/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
switch (width) {
case 8:
/* GPG1[3:6] special-funtion 3 */
for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
case 4:
/* GPG0[3:6] special-funtion 2 */
for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
default:
break;
}
s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Data pin GPG1[3:6] to special-function 2 */
for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
}
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
switch (width) {
case 8:
/* Data pin GPG3[3:6] to special-function 3 */
for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
case 4:
/* Data pin GPG2[3:6] to special-function 2 */
for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
default:
break;
}
s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
}
/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *s5pv210_hsmmc_clksrcs[4] = {
[0] = "hsmmc", /* HCLK */
[1] = "hsmmc", /* HCLK */
[2] = "sclk_mmc", /* mmc_bus */
/*[4] = reserved */
};
void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card)
{
u32 ctrl2, ctrl3;
/* don't need to alter anything acording to card-type */
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
S3C_SDHCI_CTRL2_ENFBCLKRX |
S3C_SDHCI_CTRL2_DFCNT_NONE |
S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
if (ios->clock < 25 * 1000000)
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
S3C_SDHCI_CTRL3_FCSEL2 |
S3C_SDHCI_CTRL3_FCSEL1 |
S3C_SDHCI_CTRL3_FCSEL0);
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
......@@ -170,6 +170,11 @@ config S3C_DEV_I2C1
help
Compile in platform device definitions for I2C channel 1
config S3C_DEV_I2C2
bool
help
Compile in platform device definitions for I2C channel 2
config S3C_DEV_FB
bool
help
......
......@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
......
/* linux/arch/arm/plat-s3c/dev-i2c2.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S3C series device definition for i2c device 2
*
* Based on plat-samsung/dev-i2c0.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/regs-iic.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C_PA_IIC2,
.end = S3C_PA_IIC2 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CAN0,
.end = IRQ_CAN0,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_i2c2 = {
.name = "s3c2410-i2c",
.id = 2,
.num_resources = ARRAY_SIZE(s3c_i2c_resource),
.resource = s3c_i2c_resource,
};
static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
.flags = 0,
.bus_num = 2,
.slave_addr = 0x10,
.frequency = 100*1000,
.sda_delay = 100,
};
void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
{
struct s3c2410_platform_i2c *npd;
if (!pd)
pd = &default_i2c_data2;
npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
if (!npd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
else if (!npd->cfg_gpio)
npd->cfg_gpio = s3c_i2c2_cfg_gpio;
s3c_device_i2c2.dev.platform_data = npd;
}
......@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
......
......@@ -84,4 +84,11 @@ extern void s3c64xx_fb_gpio_setup_24bpp(void);
*/
extern void s5pc100_fb_gpio_setup_24bpp(void);
/**
* s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
*
* Initialise the GPIO for an 24bpp LCD display on the RGB interface.
*/
extern void s5pv210_fb_gpio_setup_24bpp(void);
#endif /* __PLAT_S3C_FB_H */
......@@ -32,4 +32,11 @@ static inline void s3c_i2c1_setname(char *name)
#endif
}
static inline void s3c_i2c2_setname(char *name)
{
#ifdef CONFIG_S3C_DEV_I2C2
s3c_device_i2c2.name = name;
#endif
}
#endif /* __ASM_ARCH_IIC_H */
......@@ -54,9 +54,11 @@ struct s3c2410_platform_i2c {
*/
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
#endif /* __ASM_ARCH_IIC_H */
......@@ -75,6 +75,9 @@ extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
......@@ -218,4 +221,56 @@ static inline void s5pc100_default_sdhci1(void) { }
static inline void s5pc100_default_sdhci2(void) { }
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
/* S5PC110 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pv210_default_sdhci0(void)
{
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
}
#else
static inline void s5pc100_default_sdhci0(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC */
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pv210_default_sdhci1(void)
{
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
}
#else
static inline void s5pv210_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pv210_default_sdhci2(void)
{
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
}
#else
static inline void s5pv210_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s5pv210_default_sdhci0(void) { }
static inline void s5pv210_default_sdhci1(void) { }
static inline void s5pv210_default_sdhci2(void) { }
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
#endif /* __PLAT_S3C_SDHCI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment