sh_eth: define/use EESR_RX_CHECK macro

sh_eth_interrupt() uses the same Rx interrupt mask twice to check the interrupt
status register -- #define EESR_RX_CHECK  and use it instead.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/sh_eth.c

@@ -1504,23 +1504,14 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	 */
 	intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI;
 	/* Clear interrupt */
-	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
-			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
-			cd->tx_check | cd->eesr_err_check)) {
+	if (intr_status & (EESR_RX_CHECK | cd->tx_check | cd->eesr_err_check)) {
 		sh_eth_write(ndev, intr_status, EESR);
 		ret = IRQ_HANDLED;
 	} else
 		goto other_irq;
 
-	if (intr_status & (EESR_FRC | /* Frame recv*/
-			EESR_RMAF | /* Multi cast address recv*/
-			EESR_RRF  | /* Bit frame recv */
-			EESR_RTLF | /* Long frame recv*/
-			EESR_RTSF | /* short frame recv */
-			EESR_PRE  | /* PHY-LSI recv error */
-			EESR_CERF)){ /* recv frame CRC error */
+	if (intr_status & EESR_RX_CHECK)
 		sh_eth_rx(ndev, intr_status);
-	}
 
 	/* Tx Check */
 	if (intr_status & cd->tx_check) {

drivers/net/ethernet/renesas/sh_eth.h

@@ -248,6 +248,14 @@ enum EESR_BIT {
 	EESR_CERF	= 0x00000001,
 };
 
+#define EESR_RX_CHECK		(EESR_FRC  | /* Frame recv */		\
+				 EESR_RMAF | /* Multicast address recv */ \
+				 EESR_RRF  | /* Bit frame recv */	\
+				 EESR_RTLF | /* Long frame recv */	\
+				 EESR_RTSF | /* Short frame recv */	\
+				 EESR_PRE  | /* PHY-LSI recv error */	\
+				 EESR_CERF)  /* Recv frame CRC error */
+
 #define DEFAULT_TX_CHECK	(EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | \
 				 EESR_RTO)
 #define DEFAULT_EESR_ERR_CHECK	(EESR_TWB | EESR_TABT | EESR_RABT | \