MIPS: Set I/O port resource types correctly

Set I/O port resource structs to have IORESOURCE_IO in their type field.

Previously we marked these as merely IORESOURCE_BUSY without indicating the
type.  Setting the type doesn't fix any functional problem but makes %pR
on the resource work better.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

arch/mips/jazz/setup.c

@@ -32,22 +32,22 @@ static struct resource jazz_io_resources[] = {
 		.start	= 0x00,
 		.end	= 0x1f,
 		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
 	}, {
 		.start	= 0x40,
 		.end	= 0x5f,
 		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
 	}, {
 		.start	= 0x80,
 		.end	= 0x8f,
 		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
 	}, {
 		.start	= 0xc0,
 		.end	= 0xdf,
 		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
 	}
 };
 

arch/mips/mti-malta/malta-setup.c

@@ -47,31 +47,31 @@ static struct resource standard_io_resources[] = {
 		.name = "dma1",
 		.start = 0x00,
 		.end = 0x1f,
-		.flags = IORESOURCE_BUSY
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
 	},
 	{
 		.name = "timer",
 		.start = 0x40,
 		.end = 0x5f,
-		.flags = IORESOURCE_BUSY
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
 	},
 	{
 		.name = "keyboard",
 		.start = 0x60,
 		.end = 0x6f,
-		.flags = IORESOURCE_BUSY
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
 	},
 	{
 		.name = "dma page reg",
 		.start = 0x80,
 		.end = 0x8f,
-		.flags = IORESOURCE_BUSY
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
 	},
 	{
 		.name = "dma2",
 		.start = 0xc0,
 		.end = 0xdf,
-		.flags = IORESOURCE_BUSY
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
 	},
 };