Commit ebb3b9a9 authored by Linus Walleij's avatar Linus Walleij Committed by Mark Brown

spi: efm32: Convert to use GPIO descriptors

This switches the EFM32 driver over to use the GPIO descriptor
handling in the core. The GPIO handling in this driver is
pretty simplistic so this should just work. Drop the GPIO headers
and insert the implicitly included <linux/of.h> header.
Signed-off-by: default avatarLinus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Uwe Kleine-König <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Link: https://lore.kernel.org/r/20200317094914.331932-1-linus.walleij@linaro.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 6960b033
......@@ -6,14 +6,13 @@
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_data/efm32-spi.h>
#include <linux/of.h>
#define DRIVER_NAME "efm32-spi"
......@@ -82,9 +81,6 @@ struct efm32_spi_ddata {
const u8 *tx_buf;
u8 *rx_buf;
unsigned tx_len, rx_len;
/* chip selects */
unsigned csgpio[];
};
#define ddata_to_dev(ddata) (&(ddata->bitbang.master->dev))
......@@ -102,14 +98,6 @@ static u32 efm32_spi_read32(struct efm32_spi_ddata *ddata, unsigned offset)
return readl_relaxed(ddata->base + offset);
}
static void efm32_spi_chipselect(struct spi_device *spi, int is_on)
{
struct efm32_spi_ddata *ddata = spi_master_get_devdata(spi->master);
int value = !(spi->mode & SPI_CS_HIGH) == !(is_on == BITBANG_CS_ACTIVE);
gpio_set_value(ddata->csgpio[spi->chip_select], value);
}
static int efm32_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
......@@ -320,17 +308,11 @@ static int efm32_spi_probe(struct platform_device *pdev)
int ret;
struct spi_master *master;
struct device_node *np = pdev->dev.of_node;
int num_cs, i;
if (!np)
return -EINVAL;
num_cs = of_gpio_named_count(np, "cs-gpios");
if (num_cs < 0)
return num_cs;
master = spi_alloc_master(&pdev->dev,
sizeof(*ddata) + num_cs * sizeof(unsigned));
master = spi_alloc_master(&pdev->dev, sizeof(*ddata));
if (!master) {
dev_dbg(&pdev->dev,
"failed to allocate spi master controller\n");
......@@ -340,14 +322,13 @@ static int efm32_spi_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->num_chipselect = num_cs;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
master->use_gpio_descriptors = true;
ddata = spi_master_get_devdata(master);
ddata->bitbang.master = master;
ddata->bitbang.chipselect = efm32_spi_chipselect;
ddata->bitbang.setup_transfer = efm32_spi_setup_transfer;
ddata->bitbang.txrx_bufs = efm32_spi_txrx_bufs;
......@@ -361,25 +342,6 @@ static int efm32_spi_probe(struct platform_device *pdev)
goto err;
}
for (i = 0; i < num_cs; ++i) {
ret = of_get_named_gpio(np, "cs-gpios", i);
if (ret < 0) {
dev_err(&pdev->dev, "failed to get csgpio#%u (%d)\n",
i, ret);
goto err;
}
ddata->csgpio[i] = ret;
dev_dbg(&pdev->dev, "csgpio#%u = %u\n", i, ddata->csgpio[i]);
ret = devm_gpio_request_one(&pdev->dev, ddata->csgpio[i],
GPIOF_OUT_INIT_LOW, DRIVER_NAME);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to configure csgpio#%u (%d)\n",
i, ret);
goto err;
}
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENODEV;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment