Staging: octeon: Use preferred kernel type

This patch "uint*_t" type instead of "u*" type was used.
checkpatch.pl issue in octeon driver.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/octeon/ethernet-defines.h

@@ -37,8 +37,8 @@
 /* Maximum number of SKBs to try to free per xmit packet. */
 #define MAX_OUT_QUEUE_DEPTH 1000
 
-#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(uint32_t))
-#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(uint32_t))
+#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(u32))
+#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(u32))
 
 #define TOTAL_NUMBER_OF_PORTS       (CVMX_PIP_NUM_INPUT_PORTS+1)
 

drivers/staging/octeon/ethernet-rx.c

@@ -102,7 +102,7 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 		    cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface));
 		if (gmxx_rxx_frm_ctl.s.pre_chk == 0) {
 
-			uint8_t *ptr =
+			u8 *ptr =
 			    cvmx_phys_to_ptr(work->packet_ptr.s.addr);
 			int i = 0;
 
@@ -163,8 +163,8 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 {
 	const int	coreid = cvmx_get_core_num();
-	uint64_t	old_group_mask;
-	uint64_t	old_scratch;
+	u64	old_group_mask;
+	u64	old_scratch;
 	int		rx_count = 0;
 	int		did_work_request = 0;
 	int		packet_not_copied;
@@ -284,7 +284,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			 * entirely stored in the work entry.
 			 */
 			if (unlikely(work->word2.s.bufs == 0)) {
-				uint8_t *ptr = work->packet_data;
+				u8 *ptr = work->packet_data;
 
 				if (likely(!work->word2.s.not_IP)) {
 					/*

drivers/staging/octeon/ethernet-tx.c

@@ -143,8 +143,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	cvmx_pko_command_word0_t pko_command;
 	union cvmx_buf_ptr hw_buffer;
-	uint64_t old_scratch;
-	uint64_t old_scratch2;
+	u64 old_scratch;
+	u64 old_scratch2;
 	int qos;
 	int i;
 	enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
@@ -576,7 +576,7 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
 	 * calculation may add a little extra, but that doesn't
 	 * hurt.
 	 */
-	copy_location = packet_buffer + sizeof(uint64_t);
+	copy_location = packet_buffer + sizeof(u64);
 	copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6;
 
 	/*

drivers/staging/octeon/ethernet.c

@@ -382,11 +382,11 @@ static int cvm_oct_set_mac_filter(struct net_device *dev)
 	    && (cvmx_helper_interface_get_mode(interface) !=
 		CVMX_HELPER_INTERFACE_MODE_SPI)) {
 		int i;
-		uint8_t *ptr = dev->dev_addr;
-		uint64_t mac = 0;
+		u8 *ptr = dev->dev_addr;
+		u64 mac = 0;
 
 		for (i = 0; i < 6; i++)
-			mac = (mac << 8) | (uint64_t)ptr[i];
+			mac = (mac << 8) | (u64)ptr[i];
 
 		gmx_cfg.u64 =
 		    cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
@@ -835,7 +835,7 @@ static int cvm_oct_probe(struct platform_device *pdev)
 				cvm_oct_device[priv->port] = dev;
 				fau -=
 				    cvmx_pko_get_num_queues(priv->port) *
-				    sizeof(uint32_t);
+				    sizeof(u32);
 				queue_delayed_work(cvm_oct_poll_queue,
 						&priv->port_periodic_work, HZ);
 			}

drivers/staging/octeon/octeon-ethernet.h

@@ -43,7 +43,7 @@ struct octeon_ethernet {
 	struct phy_device *phydev;
 	unsigned int last_link;
 	/* Last negotiated link state */
-	uint64_t link_info;
+	u64 link_info;
 	/* Called periodically to check link status */
 	void (*poll)(struct net_device *dev);
 	struct delayed_work	port_periodic_work;