Commit ed7740e3 authored by Peter Senna Tschudin's avatar Peter Senna Tschudin Committed by Shawn Guo

ARM: dts: imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges (LVDS-DP++)

Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
B850v3 dts file.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarPeter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent fd1eb46c
...@@ -72,6 +72,14 @@ lvds0: lvds-channel@0 { ...@@ -72,6 +72,14 @@ lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg"; fsl,data-mapping = "spwg";
fsl,data-width = <24>; fsl,data-width = <24>;
status = "okay"; status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&stdp4028_in>;
};
};
}; };
}; };
...@@ -142,3 +150,65 @@ ads7830@4a { ...@@ -142,3 +150,65 @@ ads7830@4a {
reg = <0x4a>; reg = <0x4a>;
}; };
}; };
&mux2_i2c2 {
clock-frequency = <100000>;
stdp2690@72 {
compatible = "megachips,stdp2690-ge-b850v3-fw";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
stdp2690_in: endpoint {
remote-endpoint = <&stdp4028_out>;
};
};
port@1 {
reg = <1>;
stdp2690_out: endpoint {
/* Connector for external display */
};
};
};
};
stdp4028@73 {
compatible = "megachips,stdp4028-ge-b850v3-fw";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
interrupt-parent = <&gpio2>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
stdp4028_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@1 {
reg = <1>;
stdp4028_out: endpoint {
remote-endpoint = <&stdp2690_in>;
};
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment