Commit edb403fb authored by Eric Miao's avatar Eric Miao Committed by Russell King

[ARM] pxa/corgi: use SPI-based driver for ads7846, corgi-lcd and max1111

Signed-off-by: default avatarEric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 9ae808d8
......@@ -28,7 +28,7 @@ obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
......
......@@ -22,6 +22,9 @@
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <video/w100fb.h>
#include <asm/setup.h>
......@@ -43,6 +46,7 @@
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl.h>
......@@ -151,53 +155,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = {
EXPORT_SYMBOL(corgiscoop_device);
/*
* Corgi SSP Device
*
* Set the parent as the scoop device because a lot of SSP devices
* also use scoop functions and this makes the power up/down order
* work correctly.
*/
struct platform_device corgissp_device = {
.name = "corgi-ssp",
.dev = {
.parent = &corgiscoop_device.dev,
},
.id = -1,
};
struct corgissp_machinfo corgi_ssp_machinfo = {
.port = 1,
.cs_lcdcon = CORGI_GPIO_LCDCON_CS,
.cs_ads7846 = CORGI_GPIO_ADS7846_CS,
.cs_max1111 = CORGI_GPIO_MAX1111_CS,
.clk_lcdcon = 76,
.clk_ads7846 = 2,
.clk_max1111 = 8,
};
/*
* LCD/Framebuffer
*/
static void w100_lcdtg_suspend(struct w100fb_par *par)
{
corgi_lcdtg_suspend();
}
static void w100_lcdtg_init(struct w100fb_par *par)
{
corgi_lcdtg_hw_init(par->xres);
}
static struct w100_tg_info corgi_lcdtg_info = {
.change = w100_lcdtg_init,
.suspend = w100_lcdtg_suspend,
.resume = w100_lcdtg_init,
};
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
......@@ -276,7 +233,6 @@ static struct w100_mode corgi_fb_modes[] = {
};
static struct w100fb_mach_info corgi_fb_info = {
.tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
......@@ -302,60 +258,10 @@ static struct platform_device corgifb_device = {
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
.parent = &corgissp_device.dev,
},
};
/*
* Corgi Backlight Device
*/
static void corgi_bl_kick_battery(void)
{
void (*kick_batt)(void);
kick_batt = symbol_get(sharpsl_battery_kick);
if (kick_batt) {
kick_batt();
symbol_put(sharpsl_battery_kick);
}
}
static void corgi_bl_set_intensity(int intensity)
{
if (intensity > 0x10)
intensity += 0x10;
/* Bits 0-4 are accessed via the SSP interface */
corgi_ssp_blduty_set(intensity & 0x1f);
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
}
static struct generic_bl_info corgi_bl_machinfo = {
.name = "corgi-bl",
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
.kick_battery = corgi_bl_kick_battery,
};
static struct platform_device corgibl_device = {
.name = "generic-bl",
.dev = {
.parent = &corgifb_device.dev,
.platform_data = &corgi_bl_machinfo,
},
.id = -1,
};
/*
* Corgi Keyboard Device
*/
......@@ -373,66 +279,6 @@ static struct platform_device corgiled_device = {
.id = -1,
};
/*
* Corgi Touch Screen Device
*/
static unsigned long (*get_hsync_invperiod)(struct device *dev);
static void inline sharpsl_wait_sync(int gpio)
{
while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
}
static unsigned long corgi_get_hsync_invperiod(void)
{
if (!get_hsync_invperiod)
get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
if (!get_hsync_invperiod)
return 0;
return get_hsync_invperiod(&corgifb_device.dev);
}
static void corgi_put_hsync(void)
{
if (get_hsync_invperiod)
symbol_put(w100fb_get_hsynclen);
get_hsync_invperiod = NULL;
}
static void corgi_wait_hsync(void)
{
sharpsl_wait_sync(CORGI_GPIO_HSYNC);
}
static struct resource corgits_resources[] = {
[0] = {
.start = CORGI_IRQ_GPIO_TP_INT,
.end = CORGI_IRQ_GPIO_TP_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct corgits_machinfo corgi_ts_machinfo = {
.get_hsync_invperiod = corgi_get_hsync_invperiod,
.put_hsync = corgi_put_hsync,
.wait_hsync = corgi_wait_hsync,
};
static struct platform_device corgits_device = {
.name = "corgi-ts",
.dev = {
.parent = &corgissp_device.dev,
.platform_data = &corgi_ts_machinfo,
},
.id = -1,
.num_resources = ARRAY_SIZE(corgits_resources),
.resource = corgits_resources,
};
/*
* MMC/SD Device
*
......@@ -555,14 +401,137 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
};
static void corgi_ads7846_cs(u32 command)
{
gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
}
static struct pxa2xx_spi_chip corgi_ads7846_chip = {
.cs_control = corgi_ads7846_cs,
};
static void corgi_notify_intensity(int intensity)
{
/* Bit 5 is via SCOOP */
if (intensity & 0x0020)
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
}
static void corgi_bl_kick_battery(void)
{
void (*kick_batt)(void);
kick_batt = symbol_get(sharpsl_battery_kick);
if (kick_batt) {
kick_batt();
symbol_put(sharpsl_battery_kick);
}
}
static struct corgi_lcd_platform_data corgi_lcdcon_info = {
.init_mode = CORGI_LCD_MODE_VGA,
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.notify = corgi_notify_intensity,
.kick_battery = corgi_bl_kick_battery,
};
static void corgi_lcdcon_cs(u32 command)
{
gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
}
static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
.cs_control = corgi_lcdcon_cs,
};
static void corgi_max1111_cs(u32 command)
{
gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
}
static struct pxa2xx_spi_chip corgi_max1111_chip = {
.cs_control = corgi_max1111_cs,
};
static struct spi_board_info corgi_spi_devices[] = {
{
.modalias = "ads7846",
.max_speed_hz = 1200000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &corgi_ads7846_info,
.controller_data= &corgi_ads7846_chip,
.irq = gpio_to_irq(CORGI_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
.bus_num = 1,
.chip_select = 1,
.platform_data = &corgi_lcdcon_info,
.controller_data= &corgi_lcdcon_chip,
}, {
.modalias = "max1111",
.max_speed_hz = 450000,
.bus_num = 1,
.chip_select = 2,
.controller_data= &corgi_max1111_chip,
},
};
static void __init corgi_init_spi(void)
{
int err;
err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
if (err)
return;
err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
if (err)
goto err_free_1;
err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
if (err)
goto err_free_2;
gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
pxa2xx_set_spi_info(1, &corgi_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
return;
err_free_2:
gpio_free(CORGI_GPIO_LCDCON_CS);
err_free_1:
gpio_free(CORGI_GPIO_ADS7846_CS);
}
#else
static inline void corgi_init_spi(void) {}
#endif
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgissp_device,
&corgifb_device,
&corgikbd_device,
&corgibl_device,
&corgits_device,
&corgiled_device,
};
......@@ -592,7 +561,7 @@ static void __init corgi_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
corgi_init_spi();
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment