Commit ee581ae8 authored by Nicolas Pitre's avatar Nicolas Pitre Committed by Nicolas Pitre

ARM: OMAP: move OMAP1 memory config from plat/memory.h to its mach/memory.h

Signed-off-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 8fce8b20
...@@ -2,4 +2,55 @@ ...@@ -2,4 +2,55 @@
* arch/arm/mach-omap1/include/mach/memory.h * arch/arm/mach-omap1/include/mach/memory.h
*/ */
#include <plat/memory.h> #ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x10000000)
/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET UL(0x30000000)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (is_lbus_device(dev)) \
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
#define __arch_dma_to_pfn(dev, addr) \
({ dma_addr_t __dma = addr; \
if (is_lbus_device(dev)) \
__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
__phys_to_pfn(__dma); \
})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
__virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
#endif
...@@ -37,53 +37,10 @@ ...@@ -37,53 +37,10 @@
* Physical DRAM offset. * Physical DRAM offset.
*/ */
#if defined(CONFIG_ARCH_OMAP1) #if defined(CONFIG_ARCH_OMAP1)
#define PLAT_PHYS_OFFSET UL(0x10000000) #error "OMAP1 should not be including this"
#else #else
#define PLAT_PHYS_OFFSET UL(0x80000000) #define PLAT_PHYS_OFFSET UL(0x80000000)
#endif #endif
/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* OMAP bus type is lbus. We do the address translation based on the
* device overriding the defaults used in the dma-mapping API.
* Note that the is_lbus_device() test is not very efficient on 1510
* because of the strncmp().
*/
#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET UL(0x30000000)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
#define __arch_pfn_to_dma(dev, pfn) \
({ dma_addr_t __dma = __pfn_to_phys(pfn); \
if (is_lbus_device(dev)) \
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
#define __arch_dma_to_pfn(dev, addr) \
({ dma_addr_t __dma = addr; \
if (is_lbus_device(dev)) \
__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
__phys_to_pfn(__dma); \
})
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
(dma_addr_t) (is_lbus_device(dev) ? \
virt_to_lbus(__addr) : \
__virt_to_phys(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment