Commit ef4afc62 authored by Maxime Ripard's avatar Maxime Ripard

ARM: dts: sunxi: Add missing dmas properties to TCON

The TCON binding mandates a dmas phandle to the DMAengine channel used for
that controller. However, since it's not used in the driver, some device
trees have been missing it. Let's add it.
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent c36ffe4d
...@@ -275,6 +275,7 @@ tcon0: lcd-controller@1c0c000 { ...@@ -275,6 +275,7 @@ tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun5i-a13-tcon"; compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>; reg = <0x01c0c000 0x1000>;
interrupts = <44>; interrupts = <44>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
resets = <&ccu RST_LCD>; resets = <&ccu RST_LCD>;
reset-names = "lcd"; reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD>, clocks = <&ccu CLK_AHB_LCD>,
......
...@@ -285,6 +285,7 @@ tcon0: lcd-controller@1c0c000 { ...@@ -285,6 +285,7 @@ tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun6i-a31-tcon"; compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0c000 0x1000>; reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 11>;
resets = <&ccu RST_AHB1_LCD0>; resets = <&ccu RST_AHB1_LCD0>;
reset-names = "lcd"; reset-names = "lcd";
clocks = <&ccu CLK_AHB1_LCD0>, clocks = <&ccu CLK_AHB1_LCD0>,
...@@ -334,6 +335,7 @@ tcon1: lcd-controller@1c0d000 { ...@@ -334,6 +335,7 @@ tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun6i-a31-tcon"; compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0d000 0x1000>; reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12>;
resets = <&ccu RST_AHB1_LCD1>; resets = <&ccu RST_AHB1_LCD1>;
reset-names = "lcd"; reset-names = "lcd";
clocks = <&ccu CLK_AHB1_LCD1>, clocks = <&ccu CLK_AHB1_LCD1>,
......
...@@ -182,6 +182,7 @@ tcon0: lcd-controller@1c0c000 { ...@@ -182,6 +182,7 @@ tcon0: lcd-controller@1c0c000 {
/* compatible gets set in SoC specific dtsi file */ /* compatible gets set in SoC specific dtsi file */
reg = <0x01c0c000 0x1000>; reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12>;
clocks = <&ccu CLK_BUS_LCD>, clocks = <&ccu CLK_BUS_LCD>,
<&ccu CLK_LCD_CH0>; <&ccu CLK_LCD_CH0>;
clock-names = "ahb", clock-names = "ahb",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment