ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs

This makes the API the same as used with OMAP2, and makes it possible
to implement a generic driver API for the functionality.
Signed-off-by: Tero Kristo <t-kristo@ti.com>

arch/arm/mach-omap2/pm34xx.c

@@ -137,9 +137,8 @@ static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					~(OMAP3430_ST_IO_MASK |
-					  OMAP3430_ST_IO_CHAIN_MASK));
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+					OMAP3430_ST_IO_CHAIN_MASK);
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -154,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * IO events before parsing in mux code
 	 */
 	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
-					OMAP3430_ST_IO_MASK |
-					OMAP3430_ST_IO_CHAIN_MASK);
-	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+					~(OMAP3430_ST_IO_MASK |
+					  OMAP3430_ST_IO_CHAIN_MASK));
+	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1,
+						 ~0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;

arch/arm/mach-omap2/prm3xxx.c

@@ -217,7 +217,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
  * @module: PRM module to clear wakeups from
  * @regs: register set to clear, 1 or 3
- * @ignore_bits: wakeup status bits to ignore
+ * @wkst_mask: wkst bits to clear
  *
  * The purpose of this function is to clear any wake-up events latched
  * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
@@ -226,7 +226,7 @@ static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
  * that any peripheral wake-up events occurring while attempting to
  * clear the PM_WKST_x are detected and cleared.
  */
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
 {
 	u32 wkst, fclk, iclk, clken;
 	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
@@ -238,7 +238,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 
 	wkst = omap2_prm_read_mod_reg(module, wkst_off);
 	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
+	wkst &= wkst_mask;
 	if (wkst) {
 		iclk = omap2_cm_read_mod_reg(module, iclk_off);
 		fclk = omap2_cm_read_mod_reg(module, fclk_off);
@@ -254,7 +254,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
 			omap2_prm_write_mod_reg(wkst, module, wkst_off);
 			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
+			wkst &= wkst_mask;
 			c++;
 		}
 		omap2_cm_write_mod_reg(iclk, module, iclk_off);

arch/arm/mach-omap2/prm3xxx.h

@@ -145,7 +145,7 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);