[ARM] S3C: Add USB high-speed/OtG device definitions

Add platform device definitions for the high-speed and OtG
capable device block on the newer Samsung parts.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c6400/include/mach/map.h

@@ -39,6 +39,7 @@
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
 #define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
@@ -70,5 +71,6 @@
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 
 #endif /* __ASM_ARCH_6400_MAP_H */

arch/arm/plat-s3c/Kconfig

@@ -186,4 +186,9 @@ config S3C_DEV_USB_HOST
 	help
 	  Compile in platform device definition for USB host.
 
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
 endif

arch/arm/plat-s3c/Makefile

@@ -32,3 +32,4 @@ obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o

arch/arm/plat-s3c/dev-usb-hsotg.c

+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+};

arch/arm/plat-s3c/include/plat/devs.h

@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
 
 /* s3c2440 specific devices */
 

arch/arm/plat-s3c/include/plat/udc-hs.h

+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hostg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};