iwl3945: use iwl_isr

iwl3945 uses iwl_isr and deletes duplicated iwl3945_isr.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Acked-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -1280,64 +1280,6 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static irqreturn_t iwl_isr(int irq, void *data)
-{
-	struct iwl_priv *priv = data;
-	u32 inta, inta_mask;
-	u32 inta_fh;
-	if (!priv)
-		return IRQ_NONE;
-
-	spin_lock(&priv->lock);
-
-	/* Disable (but don't clear!) interrupts here to avoid
-	 *    back-to-back ISRs and sporadic interrupts from our NIC.
-	 * If we have something to service, the tasklet will re-enable ints.
-	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* Discover which interrupts are active/pending */
-	inta = iwl_read32(priv, CSR_INT);
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
-	/* Ignore interrupt if there's nothing in NIC to service.
-	 * This may be due to IRQ shared with another device,
-	 * or due to sporadic interrupts thrown from our NIC. */
-	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
-		goto none;
-	}
-
-	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared. It might have already raised
-		 * an interrupt */
-		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
-		goto unplugged;
-	}
-
-	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-		      inta, inta_mask, inta_fh);
-
-	inta &= ~CSR_INT_BIT_SCD;
-
-	/* iwl_irq_tasklet() will service interrupts and re-enable them */
-	if (likely(inta || inta_fh))
-		tasklet_schedule(&priv->irq_tasklet);
-
- unplugged:
-	spin_unlock(&priv->lock);
-	return IRQ_HANDLED;
-
- none:
-	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if diabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	spin_unlock(&priv->lock);
-	return IRQ_NONE;
-}
-
 /******************************************************************************
  *
  * uCode download functions

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -1444,6 +1444,65 @@ void iwl_enable_interrupts(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwl_enable_interrupts);
 
+irqreturn_t iwl_isr(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 inta_fh;
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock(&priv->lock);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta && !inta_fh) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+		      inta, inta_mask, inta_fh);
+
+	inta &= ~CSR_INT_BIT_SCD;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta || inta_fh))
+		tasklet_schedule(&priv->irq_tasklet);
+
+ unplugged:
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl_enable_interrupts(priv);
+	spin_unlock(&priv->lock);
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr);
+
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
 	struct iwl_bt_cmd bt_cmd = {

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -421,6 +421,7 @@ int iwl_send_card_state(struct iwl_priv *priv, u32 flags,
  *****************************************************/
 void iwl_disable_interrupts(struct iwl_priv *priv);
 void iwl_enable_interrupts(struct iwl_priv *priv);
+irqreturn_t iwl_isr(int irq, void *data);
 static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 {
 	int pos;

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -2325,63 +2325,6 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static irqreturn_t iwl3945_isr(int irq, void *data)
-{
-	struct iwl_priv *priv = data;
-	u32 inta, inta_mask;
-	u32 inta_fh;
-	if (!priv)
-		return IRQ_NONE;
-
-	spin_lock(&priv->lock);
-
-	/* Disable (but don't clear!) interrupts here to avoid
-	 *    back-to-back ISRs and sporadic interrupts from our NIC.
-	 * If we have something to service, the tasklet will re-enable ints.
-	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* Discover which interrupts are active/pending */
-	inta = iwl_read32(priv, CSR_INT);
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
-	/* Ignore interrupt if there's nothing in NIC to service.
-	 * This may be due to IRQ shared with another device,
-	 * or due to sporadic interrupts thrown from our NIC. */
-	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
-		goto none;
-	}
-
-	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared */
-		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
-		goto unplugged;
-	}
-
-	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-		      inta, inta_mask, inta_fh);
-
-	inta &= ~CSR_INT_BIT_SCD;
-
-	/* iwl3945_irq_tasklet() will service interrupts and re-enable them */
-	if (likely(inta || inta_fh))
-		tasklet_schedule(&priv->irq_tasklet);
-unplugged:
-	spin_unlock(&priv->lock);
-
-	return IRQ_HANDLED;
-
- none:
-	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	spin_unlock(&priv->lock);
-	return IRQ_NONE;
-}
-
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
 					 enum ieee80211_band band,
 				     u8 is_active, u8 n_probes,
@@ -5235,7 +5178,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED,
+	err = request_irq(priv->pci_dev->irq, iwl_isr, IRQF_SHARED,
 			  DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);