Commit f1d63a59 authored by Eyal Shapira's avatar Eyal Shapira Committed by Luciano Coelho

wl12xx: add support for HW dynamic PS

FW now supports dynamic PS so we don't need to use mac80211 support.
FW will go to PSM after a specified timeout with no Rx/Tx traffic.
- Changed FW API to include new PS mode (AUTO_MODE) and including timeout parameter
- The default PS mode would be dynamic PS
- Default timeout is 100ms (same as it used to be in mac80211)
- Avoid using mac80211 APIs to disable/enable dynamic PS as we're not
using mac80211 PS control anymore.
- COEX is handled by the FW while in dynamic PS so removed
handling of SOFT_GEMINI
Signed-off-by: default avatarEyal Shapira <eyal@wizery.com>
Signed-off-by: default avatarEliad Peller <eliad@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent d6bf9ada
......@@ -996,7 +996,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
}
int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 ps_mode)
u8 ps_mode, u16 auto_ps_timeout)
{
struct wl1271_cmd_ps_params *ps_params = NULL;
int ret = 0;
......@@ -1011,6 +1011,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
ps_params->role_id = wlvif->role_id;
ps_params->ps_mode = ps_mode;
ps_params->auto_ps_timeout = auto_ps_timeout;
ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
sizeof(*ps_params), 0);
......
......@@ -51,7 +51,7 @@ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 ps_mode);
u8 ps_mode, u16 auto_ps_timeout);
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len);
int wl1271_cmd_template_set(struct wl1271 *wl, u8 role_id,
......@@ -400,6 +400,7 @@ struct wl1271_tim {
} __packed;
enum wl1271_cmd_ps_mode {
STATION_AUTO_PS_MODE, /* Dynamic Power Save */
STATION_ACTIVE_MODE,
STATION_POWER_SAVE_MODE
};
......@@ -409,7 +410,7 @@ struct wl1271_cmd_ps_params {
u8 role_id;
u8 ps_mode; /* STATION_* */
u8 padding[2];
u16 auto_ps_timeout;
} __packed;
/* HW encryption keys */
......
......@@ -914,6 +914,12 @@ struct conf_conn_settings {
*/
u8 psm_entry_nullfunc_retries;
/*
* Specifies the dynamic PS timeout in ms that will be used
* by the FW when in AUTO_PS mode
*/
u16 dynamic_ps_timeout;
/*
*
* Specifies the interval of the connection keep-alive null-func
......
......@@ -78,21 +78,13 @@ static void wl1271_stop_ba_event(struct wl1271 *wl, struct wl12xx_vif *wlvif)
static void wl12xx_event_soft_gemini_sense(struct wl1271 *wl,
u8 enable)
{
struct ieee80211_vif *vif;
struct wl12xx_vif *wlvif;
if (enable) {
/* disable dynamic PS when requested by the firmware */
wl12xx_for_each_wlvif_sta(wl, wlvif) {
vif = wl12xx_wlvif_to_vif(wlvif);
ieee80211_disable_dyn_ps(vif);
}
set_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags);
} else {
clear_bit(WL1271_FLAG_SOFT_GEMINI, &wl->flags);
wl12xx_for_each_wlvif_sta(wl, wlvif) {
vif = wl12xx_wlvif_to_vif(wlvif);
ieee80211_enable_dyn_ps(vif);
wl1271_recalc_rx_streaming(wl, wlvif);
}
}
......
/*
* This file is part of wl1271
*
......@@ -240,6 +241,7 @@ static struct conf_drv_settings default_conf = {
.psm_entry_retries = 8,
.psm_exit_retries = 16,
.psm_entry_nullfunc_retries = 3,
.dynamic_ps_timeout = 100,
.keep_alive_interval = 55000,
.max_listen_interval = 20,
},
......@@ -2142,10 +2144,6 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
wl1271_info("down");
/* enable dyn ps just in case (if left on due to fw crash etc) */
if (wlvif->bss_type == BSS_TYPE_STA_BSS)
ieee80211_enable_dyn_ps(vif);
if (wl->scan.state != WL1271_SCAN_STATE_IDLE &&
wl->scan_vif == vif) {
wl->scan.state = WL1271_SCAN_STATE_IDLE;
......@@ -3694,9 +3692,6 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
dev_kfree_skb(wlvif->probereq);
wlvif->probereq = NULL;
/* re-enable dynamic ps - just in case */
ieee80211_enable_dyn_ps(vif);
/* revert back to minimum rates for the current band */
wl1271_set_band_rate(wl, wlvif);
wlvif->basic_rate =
......@@ -3827,10 +3822,9 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
/* If we want to go in PSM but we're not there yet */
if (test_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags) &&
!test_bit(WLVIF_FLAG_PSM, &wlvif->flags)) {
enum wl1271_cmd_ps_mode mode;
mode = STATION_POWER_SAVE_MODE;
ret = wl1271_ps_set_mode(wl, wlvif, mode,
ret = wl1271_ps_set_mode(wl, wlvif,
STATION_AUTO_PS_MODE,
wlvif->basic_rate,
true);
if (ret < 0)
......@@ -4976,6 +4970,7 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
IEEE80211_HW_SUPPORTS_UAPSD |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_CONNECTION_MONITOR |
......
......@@ -163,10 +163,12 @@ int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
enum wl1271_cmd_ps_mode mode, u32 rates, bool send)
{
int ret;
u16 timeout = wl->conf.conn.dynamic_ps_timeout;
switch (mode) {
case STATION_POWER_SAVE_MODE:
wl1271_debug(DEBUG_PSM, "entering psm");
case STATION_AUTO_PS_MODE:
wl1271_debug(DEBUG_PSM, "entering psm (mode=%d,timeout=%u)",
mode, timeout);
ret = wl1271_acx_wake_up_conditions(wl, wlvif);
if (ret < 0) {
......@@ -174,14 +176,13 @@ int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
return ret;
}
ret = wl1271_cmd_ps_mode(wl, wlvif, STATION_POWER_SAVE_MODE);
ret = wl1271_cmd_ps_mode(wl, wlvif, mode, timeout);
if (ret < 0)
return ret;
set_bit(WLVIF_FLAG_PSM, &wlvif->flags);
break;
case STATION_ACTIVE_MODE:
default:
wl1271_debug(DEBUG_PSM, "leaving psm");
/* disable beacon early termination */
......@@ -191,12 +192,16 @@ int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
return ret;
}
ret = wl1271_cmd_ps_mode(wl, wlvif, STATION_ACTIVE_MODE);
ret = wl1271_cmd_ps_mode(wl, wlvif, mode, 0);
if (ret < 0)
return ret;
clear_bit(WLVIF_FLAG_PSM, &wlvif->flags);
break;
case STATION_POWER_SAVE_MODE:
default:
wl1271_warning("trying to set ps to unsupported mode %d", mode);
ret = -EINVAL;
}
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment