Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

This is a dependency for imx/dt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -184,6 +184,19 @@ clocks and IDs.
 	cko2			170
 	srtc_gate		171
 	pata_gate		172
+	sata_gate		173
+	spdif_xtal_sel		174
+	spdif0_sel		175
+	spdif1_sel		176
+	spdif0_pred		177
+	spdif0_podf		178
+	spdif1_pred		179
+	spdif1_podf		180
+	spdif0_com_sel		181
+	spdif1_com_sel		182
+	spdif0_gate		183
+	spdif1_gate		184
+	spdif_ipg_gate		185
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -208,6 +208,7 @@ clocks and IDs.
 	pll4_post_div		193
 	pll5_post_div		194
 	pll5_video_div		195
+	eim_slow      		196
 
 Examples:
 

Documentation/devicetree/bindings/clock/imx6sl-clock.txt

+* Clock bindings for Freescale i.MX6 SoloLite
+
+Required properties:
+- compatible: Should be "fsl,imx6sl-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sl-clock.h
+for the full list of i.MX6 SoloLite clock IDs.

Documentation/devicetree/bindings/clock/vf610-clock.txt

+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+	compatible = "fsl,vf610-ccm";
+	reg = <0x4006b000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@40028000 {
+	compatible = "fsl,vf610-uart";
+	reg = <0x40028000 0x1000>;
+	interrupts = <0 62 0x04>;
+	clocks = <&clks VF610_CLK_UART1>;
+	clock-names = "ipg";
+};

arch/arm/Kconfig.debug

@@ -251,6 +251,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q/DL.
 
+	config DEBUG_IMX6SL_UART
+		bool "i.MX6SL Debug UART"
+		depends on SOC_IMX6SL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6SL.
+
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
 		depends on ARCH_MMP
@@ -532,7 +539,8 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
 						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART
+						DEBUG_IMX6Q_UART || \
+						DEBUG_IMX6SL_UART
 	default 1
 	depends on ARCH_MXC
 	help
@@ -631,7 +639,8 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX53_UART ||\
-				 DEBUG_IMX6Q_UART
+				 DEBUG_IMX6Q_UART || \
+				 DEBUG_IMX6SL_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default "debug/nomadik.S" if DEBUG_NOMADIK_UART

arch/arm/configs/imx_v6_v7_defconfig

@@ -37,6 +37,8 @@ CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_VF610=y
 CONFIG_MXC_PWM=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
@@ -47,6 +49,7 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
+CONFIG_PM_RUNTIME=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -170,6 +173,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FONTS=y
@@ -182,6 +186,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_IMX_SOC=y
 CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
@@ -208,10 +213,15 @@ CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_FB_HELPER=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/include/debug/imx-uart.h

@@ -65,6 +65,14 @@
 #define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
 #define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
 
+#define IMX6SL_UART1_BASE_ADDR	0x02020000
+#define IMX6SL_UART2_BASE_ADDR	0x02024000
+#define IMX6SL_UART3_BASE_ADDR	0x02034000
+#define IMX6SL_UART4_BASE_ADDR	0x02038000
+#define IMX6SL_UART5_BASE_ADDR	0x02018000
+#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
+#define IMX6SL_UART_BASE(n)	IMX6SL_UART_BASE_ADDR(n)
+
 #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
 
 #ifdef CONFIG_DEBUG_IMX1_UART
@@ -83,6 +91,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX53)
 #elif defined(CONFIG_DEBUG_IMX6Q_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6Q)
+#elif defined(CONFIG_DEBUG_IMX6SL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
 #endif
 
 #endif /* __DEBUG_IMX_UART_H */

arch/arm/mach-imx/Kconfig

@@ -56,9 +56,6 @@ config MXC_USE_EPIT
 	  uses the same clocks as the GPT. Anyway, on some systems the GPT
 	  may be in use for other purposes.
 
-config MXC_ULPI
-	bool
-
 config ARCH_HAS_RNGA
 	bool
 
@@ -233,7 +230,7 @@ config MACH_EUKREA_CPUIMX25SD
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX25
 
 choice
@@ -284,7 +281,7 @@ config MACH_PCM038
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -314,7 +311,7 @@ config MACH_CPUIMX27
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
@@ -369,7 +366,7 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for MX27PDK platform. This includes specific
@@ -414,7 +411,7 @@ config MACH_PCA100
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX27
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
@@ -481,7 +478,7 @@ config MACH_MX31LILLY
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -497,7 +494,7 @@ config MACH_MX31LITE
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
@@ -514,7 +511,7 @@ config MACH_PCM037
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -544,7 +541,7 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
@@ -571,7 +568,7 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -595,7 +592,7 @@ config MACH_ARMADILLO5X0
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX31
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -639,7 +636,7 @@ config MACH_PCM043
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX35
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -673,7 +670,7 @@ config MACH_EUKREA_CPUIMX35SD
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
+	select USB_ULPI_VIEWPORT if USB_ULPI
 	select SOC_IMX35
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
@@ -816,6 +813,40 @@ config SOC_IMX6Q
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
+config SOC_IMX6SL
+	bool "i.MX6 SoloLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select CPU_V7
+	select HAVE_IMX_ANATOP
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select PINCTRL
+	select PINCTRL_IMX6SL
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+
+	help
+	  This enables support for Freescale i.MX6 SoloLite processor.
+
+config SOC_VF610
+	bool "Vybrid Family VF610 support"
+	select CPU_V7
+	select ARM_GIC
+	select CLKSRC_OF
+	select PINCTRL
+	select PINCTRL_VF610
+	select VF_PIT_TIMER
+	select PL310_ERRATA_588369 if CACHE_PL310
+	select PL310_ERRATA_727915 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+
+	help
+	  This enable support for Freescale Vybrid VF610 processor.
+
 endif
 
 source "arch/arm/mach-imx/devices/Kconfig"

arch/arm/mach-imx/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
-obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 
@@ -98,6 +97,7 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
@@ -111,4 +111,6 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+
 obj-y += devices/

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -73,6 +73,12 @@ static const char *mx53_cko2_sel[] = {
 	"tve_sel", "lp_apm",
 	"uart_root", "dummy"/* spdif0_clk_root */,
 	"dummy", "dummy", };
+static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", };
+static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", };
+static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
+static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
+static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
+
 
 enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
@@ -110,7 +116,9 @@ enum imx5_clks {
 	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
 	cko1_sel, cko1_podf, cko1,
 	cko2_sel, cko2_podf, cko2,
-	srtc_gate, pata_gate,
+	srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
+	spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
+	spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
 	clk_max
 };
 
@@ -123,11 +131,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 {
 	int i;
 
+	of_clk_init(NULL);
+
 	clk[dummy] = imx_clk_fixed("dummy", 0);
-	clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
-	clk[osc] = imx_clk_fixed("osc", rate_osc);
-	clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
-	clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+	clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
+	clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
+	clk[ckih1] = imx_obtain_fixed_clock("ckih1", rate_ckih1);
+	clk[ckih2] = imx_obtain_fixed_clock("ckih2", rate_ckih2);
 
 	clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
 				lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -267,6 +277,13 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
 	clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
 	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
+	clk[spdif0_sel] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel));
+	clk[spdif0_pred] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3);
+	clk[spdif0_podf] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6);
+	clk[spdif0_com_s] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1,
+				spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT);
+	clk[spdif0_gate] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26);
+	clk[spdif_ipg_gate] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -378,6 +395,15 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
 	clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
 	clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+	clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
+				mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
+	clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
+				spdif_sel, ARRAY_SIZE(spdif_sel));
+	clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+	clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
+	clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
+				mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
+	clk[spdif1_gate] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -485,6 +511,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+	clk[sata_gate] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2);
 
 	clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
 				mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
@@ -495,6 +522,8 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
 	clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
 	clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+	clk[spdif_xtal_sel] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
+				mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -542,42 +571,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	return 0;
 }
 
-#ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
-				   unsigned long *ckih1, unsigned long *ckih2)
-{
-	struct device_node *np;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			*ckil = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			*osc = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			*ckih1 = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
-			*ckih2 = rate;
-	}
-}
-
 int __init mx51_clocks_init_dt(void)
 {
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+	return mx51_clocks_init(0, 0, 0, 0);
 }
 
 int __init mx53_clocks_init_dt(void)
 {
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+	return mx53_clocks_init(0, 0, 0, 0);
 }
-#endif

arch/arm/mach-imx/clk-imx6q.c

@@ -238,7 +238,7 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -270,27 +270,16 @@ static struct clk_div_table video_div_table[] = {
 	{ }
 };
 
-int __init mx6q_clocks_init(void)
+static void __init imx6q_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			clk[ckil] = imx_clk_fixed("ckil", rate);
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			clk[ckih] = imx_clk_fixed("ckih", rate);
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			clk[osc] = imx_clk_fixed("osc", rate);
-	}
+	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
+	clk[ckih] = imx_obtain_fixed_clock("ckih1", 0);
+	clk[osc] = imx_obtain_fixed_clock("osc", 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
@@ -312,7 +301,6 @@ int __init mx6q_clocks_init(void)
 	clk[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
 	clk[pll6_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
-	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x0);
 
 	/*
 	 * Bit 20 is the reserved and read-only bit, we do this only for:
@@ -360,7 +348,7 @@ int __init mx6q_clocks_init(void)
 	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
+	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 	ccm_base = base;
@@ -481,7 +469,14 @@ int __init mx6q_clocks_init(void)
 	clk[esai]         = imx_clk_gate2("esai",          "esai_podf",         base + 0x6c, 16);
 	clk[gpt_ipg]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
 	clk[gpt_ipg_per]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
-	clk[gpu2d_core]   = imx_clk_gate2("gpu2d_core",    "gpu2d_core_podf",   base + 0x6c, 24);
+	if (cpu_is_imx6dl())
+		/*
+		 * The multiplexer and divider of imx6q clock gpu3d_shader get
+		 * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
+		 */
+		clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+	else
+		clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
 	clk[gpu3d_core]   = imx_clk_gate2("gpu3d_core",    "gpu3d_core_podf",   base + 0x6c, 26);
 	clk[hdmi_iahb]    = imx_clk_gate2("hdmi_iahb",     "ahb",               base + 0x70, 0);
 	clk[hdmi_isfr]    = imx_clk_gate2("hdmi_isfr",     "pll3_pfd1_540m",    base + 0x70, 4);
@@ -499,7 +494,14 @@ int __init mx6q_clocks_init(void)
 	clk[ldb_di1]      = imx_clk_gate2("ldb_di1",       "ldb_di1_podf",      base + 0x74, 14);
 	clk[ipu2_di1]     = imx_clk_gate2("ipu2_di1",      "ipu2_di1_sel",      base + 0x74, 10);
 	clk[hsi_tx]       = imx_clk_gate2("hsi_tx",        "hsi_tx_podf",       base + 0x74, 16);
-	clk[mlb]          = imx_clk_gate2("mlb",           "axi",               base + 0x74, 18);
+	if (cpu_is_imx6dl())
+		/*
+		 * The multiplexer and divider of the imx6q clock gpu2d get
+		 * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
+		 */
+		clk[mlb] = imx_clk_gate2("mlb",            "gpu2d_core_podf",   base + 0x74, 18);
+	else
+		clk[mlb] = imx_clk_gate2("mlb",            "axi",               base + 0x74, 18);
 	clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
 	clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
 	clk[ocram]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
@@ -528,6 +530,7 @@ int __init mx6q_clocks_init(void)
 	clk[usdhc2]       = imx_clk_gate2("usdhc2",        "usdhc2_podf",       base + 0x80, 4);
 	clk[usdhc3]       = imx_clk_gate2("usdhc3",        "usdhc3_podf",       base + 0x80, 6);
 	clk[usdhc4]       = imx_clk_gate2("usdhc4",        "usdhc4_podf",       base + 0x80, 8);
+	clk[eim_slow]     = imx_clk_gate2("eim_slow",      "emi_slow_podf",     base + 0x80, 10);
 	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
 	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
 	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
@@ -547,6 +550,8 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 	clk_register_clkdev(clk[arm], NULL, "cpu0");
+	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
+	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
 
 	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
 		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
@@ -576,6 +581,5 @@ int __init mx6q_clocks_init(void)
 	WARN_ON(!base);
 	irq = irq_of_parse_and_map(np, 0);
 	mxc_timer_init(base, irq);
-
-	return 0;
 }
+CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);

arch/arm/mach-imx/clk-pllv3.c

@@ -296,13 +296,6 @@ static const struct clk_ops clk_pllv3_enet_ops = {
 	.recalc_rate	= clk_pllv3_enet_recalc_rate,
 };
 
-static const struct clk_ops clk_pllv3_mlb_ops = {
-	.prepare	= clk_pllv3_prepare,
-	.unprepare	= clk_pllv3_unprepare,
-	.enable		= clk_pllv3_enable,
-	.disable	= clk_pllv3_disable,
-};
-
 struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 			  const char *parent_name, void __iomem *base,
 			  u32 div_mask)
@@ -330,9 +323,6 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 	case IMX_PLLV3_ENET:
 		ops = &clk_pllv3_enet_ops;
 		break;
-	case IMX_PLLV3_MLB:
-		ops = &clk_pllv3_mlb_ops;
-		break;
 	default:
 		ops = &clk_pllv3_ops;
 	}

arch/arm/mach-imx/clk.c

+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include "clk.h"
 
 DEFINE_SPINLOCK(imx_ccm_lock);
+
+static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
+{
+	struct of_phandle_args phandle;
+	struct clk *clk = ERR_PTR(-ENODEV);
+	char *path;
+
+	path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
+	if (!path)
+		return ERR_PTR(-ENOMEM);
+
+	phandle.np = of_find_node_by_path(path);
+	kfree(path);
+
+	if (phandle.np) {
+		clk = of_clk_get_from_provider(&phandle);
+		of_node_put(phandle.np);
+	}
+	return clk;
+}
+
+struct clk * __init imx_obtain_fixed_clock(
+			const char *name, unsigned long rate)
+{
+	struct clk *clk;
+
+	clk = imx_obtain_fixed_clock_from_dt(name);
+	if (IS_ERR(clk))
+		clk = imx_clk_fixed(name, rate);
+	return clk;
+}

arch/arm/mach-imx/clk.h

@@ -18,7 +18,6 @@ enum imx_pllv3_type {
 	IMX_PLLV3_USB,
 	IMX_PLLV3_AV,
 	IMX_PLLV3_ENET,
-	IMX_PLLV3_MLB,
 };
 
 struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
@@ -29,6 +28,9 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 		void __iomem *reg, u8 bit_idx,
 		u8 clk_gate_flags, spinlock_t *lock);
 
+struct clk * imx_obtain_fixed_clock(
+			const char *name, unsigned long rate);
+
 static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {

arch/arm/mach-imx/common.h

@@ -68,12 +68,12 @@ extern int mx27_clocks_init_dt(void);
 extern int mx31_clocks_init_dt(void);
 extern int mx51_clocks_init_dt(void);
 extern int mx53_clocks_init_dt(void);
-extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc_arch_reset_init_dt(void);
 extern int mx53_revision(void);
 extern int imx6q_revision(void);
 extern int mx53_display_revision(void);

arch/arm/mach-imx/hardware.h

@@ -20,6 +20,7 @@
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #define __ASM_ARCH_MXC_HARDWARE_H__
 
+#include <asm/io.h>
 #include <asm/sizes.h>
 
 #define addr_in_module(addr, mod) \

arch/arm/mach-imx/imx25-dt.c

@@ -19,6 +19,8 @@
 
 static void __init imx25_dt_init(void)
 {
+	mxc_arch_reset_init_dt();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 

arch/arm/mach-imx/imx27-dt.c

@@ -22,6 +22,8 @@ static void __init imx27_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
 
+	mxc_arch_reset_init_dt();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register_full(&devinfo);

arch/arm/mach-imx/imx31-dt.c

@@ -20,6 +20,8 @@
 
 static void __init imx31_dt_init(void)
 {
+	mxc_arch_reset_init_dt();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 

arch/arm/mach-imx/imx51-dt.c

@@ -23,6 +23,8 @@ static void __init imx51_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
 
+	mxc_arch_reset_init_dt();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	platform_device_register_full(&devinfo);
 }

arch/arm/mach-imx/irq-common.c

@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/irq.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 #include "irq-common.h"
 

arch/arm/mach-imx/mach-imx53.c

@@ -21,6 +21,7 @@
 #include <asm/mach/time.h>
 
 #include "common.h"
+#include "hardware.h"
 #include "mx53.h"
 
 static void __init imx53_qsb_init(void)
@@ -38,6 +39,8 @@ static void __init imx53_qsb_init(void)
 
 static void __init imx53_dt_init(void)
 {
+	mxc_arch_reset_init_dt();
+
 	if (of_machine_is_compatible("fsl,imx53-qsb"))
 		imx53_qsb_init();
 

arch/arm/mach-imx/mach-imx6q.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
 #include <linux/cpu.h>
@@ -145,6 +146,45 @@ static void __init imx6q_sabrelite_init(void)
 	imx6q_sabrelite_cko1_setup();
 }
 
+static void __init imx6q_sabresd_cko1_setup(void)
+{
+	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
+	unsigned long rate;
+
+	cko1_sel = clk_get_sys(NULL, "cko1_sel");
+	pll4 = clk_get_sys(NULL, "pll4_audio");
+	pll4_post = clk_get_sys(NULL, "pll4_post_div");
+	cko1 = clk_get_sys(NULL, "cko1");
+	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
+			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
+		pr_err("cko1 setup failed!\n");
+		goto put_clk;
+	}
+	/*
+	 * Setting pll4 at 768MHz (24MHz * 32)
+	 * So its child clock can get 24MHz easily
+	 */
+	clk_set_rate(pll4, 768000000);
+
+	clk_set_parent(cko1_sel, pll4_post);
+	rate = clk_round_rate(cko1, 24000000);
+	clk_set_rate(cko1, rate);
+put_clk:
+	if (!IS_ERR(cko1_sel))
+		clk_put(cko1_sel);
+	if (!IS_ERR(pll4_post))
+		clk_put(pll4_post);
+	if (!IS_ERR(pll4))
+		clk_put(pll4);
+	if (!IS_ERR(cko1))
+		clk_put(cko1);
+}
+
+static void __init imx6q_sabresd_init(void)
+{
+	imx6q_sabresd_cko1_setup();
+}
+
 static void __init imx6q_1588_init(void)
 {
 	struct regmap *gpr;
@@ -165,6 +205,9 @@ static void __init imx6q_init_machine(void)
 {
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		imx6q_sabrelite_init();
+	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
+			of_machine_is_compatible("fsl,imx6dl-sabresd"))
+		imx6q_sabresd_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
@@ -253,10 +296,44 @@ static void __init imx6q_map_io(void)
 	imx_scu_map_io();
 }
 
+#ifdef CONFIG_CACHE_L2X0
+static void __init imx6q_init_l2cache(void)
+{
+	void __iomem *l2x0_base;
+	struct device_node *np;
+	unsigned int val;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	if (!np)
+		goto out;
+
+	l2x0_base = of_iomap(np, 0);
+	if (!l2x0_base) {
+		of_node_put(np);
+		goto out;
+	}
+
+	/* Configure the L2 PREFETCH and POWER registers */
+	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val |= 0x70800000;
+	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
+	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+
+	iounmap(l2x0_base);
+	of_node_put(np);
+
+out:
+	l2x0_of_init(0, ~0UL);
+}
+#else
+static inline void imx6q_init_l2cache(void) {}
+#endif
+
 static void __init imx6q_init_irq(void)
 {
 	imx6q_init_revision();
-	l2x0_of_init(0, ~0UL);
+	imx6q_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
@@ -264,7 +341,7 @@ static void __init imx6q_init_irq(void)
 
 static void __init imx6q_timer_init(void)
 {
-	mx6q_clocks_init();
+	of_clk_init(NULL);
 	clocksource_of_init();
 	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
 			      imx6q_revision());

arch/arm/mach-imx/mach-imx6sl.c

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6sl_init_machine(void)
+{
+	mxc_arch_reset_init_dt();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init imx6sl_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	imx_src_init();
+	imx_gpc_init();
+	irqchip_init();
+}
+
+static void __init imx6sl_timer_init(void)
+{
+	of_clk_init(NULL);
+}
+
+static const char *imx6sl_dt_compat[] __initdata = {
+	"fsl,imx6sl",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
+	.map_io		= debug_ll_io_init,
+	.init_irq	= imx6sl_init_irq,
+	.init_time	= imx6sl_timer_init,
+	.init_machine	= imx6sl_init_machine,
+	.dt_compat	= imx6sl_dt_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/mach-pca100.c

@@ -398,8 +398,8 @@ static void __init pca100_init(void)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	usbh2_pdata.otg = imx_otg_ulpi_create(
+			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	if (usbh2_pdata.otg)
 		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);

arch/arm/mach-imx/mach-vf610.c

+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "common.h"
+
+static void __init vf610_init_machine(void)
+{
+	mxc_arch_reset_init_dt();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init vf610_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	irqchip_init();
+}
+
+static void __init vf610_init_time(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
+static const char *vf610_dt_compat[] __initdata = {
+	"fsl,vf610",
+	NULL,
+};
+
+DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
+	.init_irq	= vf610_init_irq,
+	.init_time	= vf610_init_time,
+	.init_machine   = vf610_init_machine,
+	.dt_compat	= vf610_dt_compat,
+	.restart	= mxc_restart,
+MACHINE_END

arch/arm/mach-imx/mm-imx1.c

@@ -39,7 +39,6 @@ void __init mx1_map_io(void)
 void __init imx1_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
 			MX1_NUM_GPIO_PORT);
 }
@@ -51,6 +50,7 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,

arch/arm/mach-imx/mm-imx21.c

@@ -66,7 +66,6 @@ void __init mx21_map_io(void)
 void __init imx21_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
 	imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
 			MX21_NUM_GPIO_PORT);
 }
@@ -82,6 +81,7 @@ static const struct resource imx21_audmux_res[] __initconst = {
 
 void __init imx21_soc_init(void)
 {
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);

arch/arm/mach-imx/mm-imx25.c

@@ -54,7 +54,6 @@ void __init imx25_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX25);
 	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 }
 
 void __init mx25_init_irq(void)
@@ -89,6 +88,7 @@ static const struct resource imx25_audmux_res[] __initconst = {
 
 void __init imx25_soc_init(void)
 {
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 	mxc_device_init();
 
 	/* i.mx25 has the i.mx35 type gpio */

arch/arm/mach-imx/mm-imx27.c

@@ -66,7 +66,6 @@ void __init mx27_map_io(void)
 void __init imx27_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 	imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
 			MX27_NUM_GPIO_PORT);
 }
@@ -82,6 +81,7 @@ static const struct resource imx27_audmux_res[] __initconst = {
 
 void __init imx27_soc_init(void)
 {
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 	mxc_device_init();
 
 	/* i.mx27 has the i.mx21 type gpio */

arch/arm/mach-imx/mm-imx3.c

@@ -138,7 +138,6 @@ void __init mx31_map_io(void)
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 	arch_ioremap_caller = imx3_ioremap_caller;
 	arm_pm_idle = imx3_idle;
 	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
@@ -174,6 +173,7 @@ void __init imx31_soc_init(void)
 
 	imx3_init_l2x0();
 
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
@@ -216,7 +216,6 @@ void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 	arm_pm_idle = imx3_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
 	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
@@ -272,6 +271,7 @@ void __init imx35_soc_init(void)
 
 	imx3_init_l2x0();
 
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);

arch/arm/mach-imx/mm-imx5.c

@@ -83,7 +83,6 @@ void __init imx51_init_early(void)
 	imx51_ipu_mipi_setup();
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
 	imx_src_init();
 }
 
@@ -91,7 +90,6 @@ void __init imx53_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX53);
 	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 	imx_src_init();
 }
 
@@ -129,6 +127,7 @@ static const struct resource imx51_audmux_res[] __initconst = {
 
 void __init imx51_soc_init(void)
 {
+	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
 	mxc_device_init();
 
 	/* i.mx51 has the i.mx35 type gpio */

arch/arm/mach-imx/system.c

@@ -21,6 +21,8 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/system_misc.h>
 #include <asm/proc-fns.h>
@@ -30,6 +32,7 @@
 #include "hardware.h"
 
 static void __iomem *wdog_base;
+static struct clk *wdog_clk;
 
 /*
  * Reset the system. It is called by machine_restart().
@@ -38,16 +41,13 @@ void mxc_restart(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
-	if (cpu_is_mx1()) {
-		wcr_enable = (1 << 0);
-	} else {
-		struct clk *clk;
+	if (wdog_clk)
+		clk_enable(wdog_clk);
 
-		clk = clk_get_sys("imx2-wdt.0", NULL);
-		if (!IS_ERR(clk))
-			clk_prepare_enable(clk);
+	if (cpu_is_mx1())
+		wcr_enable = (1 << 0);
+	else
 		wcr_enable = (1 << 2);
-	}
 
 	/* Assert SRS signal */
 	__raw_writew(wcr_enable, wdog_base);
@@ -55,7 +55,7 @@ void mxc_restart(char mode, const char *cmd)
 	/* wait for reset to assert... */
 	mdelay(500);
 
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+	pr_err("%s: Watchdog reset failed to assert reset\n", __func__);
 
 	/* delay to allow the serial port to show the message */
 	mdelay(50);
@@ -64,7 +64,34 @@ void mxc_restart(char mode, const char *cmd)
 	soft_restart(0);
 }
 
-void mxc_arch_reset_init(void __iomem *base)
+void __init mxc_arch_reset_init(void __iomem *base)
 {
 	wdog_base = base;
+
+	wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
+	if (IS_ERR(wdog_clk)) {
+		pr_warn("%s: failed to get wdog clock\n", __func__);
+		wdog_clk = NULL;
+		return;
+	}
+
+	clk_prepare(wdog_clk);
+}
+
+void __init mxc_arch_reset_init_dt(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt");
+	wdog_base = of_iomap(np, 0);
+	WARN_ON(!wdog_base);
+
+	wdog_clk = of_clk_get(np, 0);
+	if (IS_ERR(wdog_clk)) {
+		pr_warn("%s: failed to get wdog clock\n", __func__);
+		wdog_clk = NULL;
+		return;
+	}
+
+	clk_prepare(wdog_clk);
 }

arch/arm/mach-imx/ulpi.c

-/*
- * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- * Copyright 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include "ulpi.h"
-
-/* ULPIVIEW register bits */
-#define ULPIVW_WU		(1 << 31)	/* Wakeup */
-#define ULPIVW_RUN		(1 << 30)	/* read/write run */
-#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
-#define ULPIVW_SS		(1 << 27)	/* SyncState */
-#define ULPIVW_PORT_MASK	0x07	/* Port field */
-#define ULPIVW_PORT_SHIFT	24
-#define ULPIVW_ADDR_MASK	0xff	/* data address field */
-#define ULPIVW_ADDR_SHIFT	16
-#define ULPIVW_RDATA_MASK	0xff	/* read data field */
-#define ULPIVW_RDATA_SHIFT	8
-#define ULPIVW_WDATA_MASK	0xff	/* write data field */
-#define ULPIVW_WDATA_SHIFT	0
-
-static int ulpi_poll(void __iomem *view, u32 bit)
-{
-	int timeout = 10000;
-
-	while (timeout--) {
-		u32 data = __raw_readl(view);
-
-		if (!(data & bit))
-			return 0;
-
-		cpu_relax();
-	};
-
-	printk(KERN_WARNING "timeout polling for ULPI device\n");
-
-	return -ETIMEDOUT;
-}
-
-static int ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int ret;
-	void __iomem *view = otg->io_priv;
-
-	/* make sure interface is running */
-	if (!(__raw_readl(view) & ULPIVW_SS)) {
-		__raw_writel(ULPIVW_WU, view);
-
-		/* wait for wakeup */
-		ret = ulpi_poll(view, ULPIVW_WU);
-		if (ret)
-			return ret;
-	}
-
-	/* read the register */
-	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
-
-	/* wait for completion */
-	ret = ulpi_poll(view, ULPIVW_RUN);
-	if (ret)
-		return ret;
-
-	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
-}
-
-static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	int ret;
-	void __iomem *view = otg->io_priv;
-
-	/* make sure the interface is running */
-	if (!(__raw_readl(view) & ULPIVW_SS)) {
-		__raw_writel(ULPIVW_WU, view);
-		/* wait for wakeup */
-		ret = ulpi_poll(view, ULPIVW_WU);
-		if (ret)
-			return ret;
-	}
-
-	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
-		      (reg << ULPIVW_ADDR_SHIFT) |
-		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
-
-	/* wait for completion */
-	return ulpi_poll(view, ULPIVW_RUN);
-}
-
-struct usb_phy_io_ops mxc_ulpi_access_ops = {
-	.read	= ulpi_read,
-	.write	= ulpi_write,
-};
-EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
-
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
-	return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
-}

arch/arm/mach-imx/ulpi.h

 #ifndef __MACH_ULPI_H
 #define __MACH_ULPI_H
 
-#ifdef CONFIG_USB_ULPI
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
+#include <linux/usb/ulpi.h>
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
+{
+	return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
+}
 #else
 static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 {
@@ -10,7 +15,5 @@ static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
 }
 #endif
 
-extern struct usb_phy_io_ops mxc_ulpi_access_ops;
-
 #endif /* __MACH_ULPI_H */
 

include/dt-bindings/clock/imx6sl-clock.h

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SL_H
+#define __DT_BINDINGS_CLOCK_IMX6SL_H
+
+#define IMX6SL_CLK_DUMMY		0
+#define IMX6SL_CLK_CKIL			1
+#define IMX6SL_CLK_OSC			2
+#define IMX6SL_CLK_PLL1_SYS		3
+#define IMX6SL_CLK_PLL2_BUS		4
+#define IMX6SL_CLK_PLL3_USB_OTG		5
+#define IMX6SL_CLK_PLL4_AUDIO		6
+#define IMX6SL_CLK_PLL5_VIDEO		7
+#define IMX6SL_CLK_PLL6_ENET		8
+#define IMX6SL_CLK_PLL7_USB_HOST	9
+#define IMX6SL_CLK_USBPHY1		10
+#define IMX6SL_CLK_USBPHY2		11
+#define IMX6SL_CLK_USBPHY1_GATE		12
+#define IMX6SL_CLK_USBPHY2_GATE		13
+#define IMX6SL_CLK_PLL4_POST_DIV	14
+#define IMX6SL_CLK_PLL5_POST_DIV	15
+#define IMX6SL_CLK_PLL5_VIDEO_DIV	16
+#define IMX6SL_CLK_ENET_REF		17
+#define IMX6SL_CLK_PLL2_PFD0		18
+#define IMX6SL_CLK_PLL2_PFD1		19
+#define IMX6SL_CLK_PLL2_PFD2		20
+#define IMX6SL_CLK_PLL3_PFD0		21
+#define IMX6SL_CLK_PLL3_PFD1		22
+#define IMX6SL_CLK_PLL3_PFD2		23
+#define IMX6SL_CLK_PLL3_PFD3		24
+#define IMX6SL_CLK_PLL2_198M		25
+#define IMX6SL_CLK_PLL3_120M		26
+#define IMX6SL_CLK_PLL3_80M		27
+#define IMX6SL_CLK_PLL3_60M		28
+#define IMX6SL_CLK_STEP			29
+#define IMX6SL_CLK_PLL1_SW		30
+#define IMX6SL_CLK_OCRAM_ALT_SEL	31
+#define IMX6SL_CLK_OCRAM_SEL		32
+#define IMX6SL_CLK_PRE_PERIPH2_SEL	33
+#define IMX6SL_CLK_PRE_PERIPH_SEL	34
+#define IMX6SL_CLK_PERIPH2_CLK2_SEL	35
+#define IMX6SL_CLK_PERIPH_CLK2_SEL	36
+#define IMX6SL_CLK_CSI_SEL		37
+#define IMX6SL_CLK_LCDIF_AXI_SEL	38
+#define IMX6SL_CLK_USDHC1_SEL		39
+#define IMX6SL_CLK_USDHC2_SEL		40
+#define IMX6SL_CLK_USDHC3_SEL		41
+#define IMX6SL_CLK_USDHC4_SEL		42
+#define IMX6SL_CLK_SSI1_SEL		43
+#define IMX6SL_CLK_SSI2_SEL		44
+#define IMX6SL_CLK_SSI3_SEL		45
+#define IMX6SL_CLK_PERCLK_SEL		46
+#define IMX6SL_CLK_PXP_AXI_SEL		47
+#define IMX6SL_CLK_EPDC_AXI_SEL		48
+#define IMX6SL_CLK_GPU2D_OVG_SEL	49
+#define IMX6SL_CLK_GPU2D_SEL		50
+#define IMX6SL_CLK_LCDIF_PIX_SEL	51
+#define IMX6SL_CLK_EPDC_PIX_SEL		52
+#define IMX6SL_CLK_SPDIF0_SEL		53
+#define IMX6SL_CLK_SPDIF1_SEL		54
+#define IMX6SL_CLK_EXTERN_AUDIO_SEL	55
+#define IMX6SL_CLK_ECSPI_SEL		56
+#define IMX6SL_CLK_UART_SEL		57
+#define IMX6SL_CLK_PERIPH		58
+#define IMX6SL_CLK_PERIPH2		59
+#define IMX6SL_CLK_OCRAM_PODF		60
+#define IMX6SL_CLK_PERIPH_CLK2_PODF	61
+#define IMX6SL_CLK_PERIPH2_CLK2_PODF	62
+#define IMX6SL_CLK_IPG			63
+#define IMX6SL_CLK_CSI_PODF		64
+#define IMX6SL_CLK_LCDIF_AXI_PODF	65
+#define IMX6SL_CLK_USDHC1_PODF		66
+#define IMX6SL_CLK_USDHC2_PODF		67
+#define IMX6SL_CLK_USDHC3_PODF		68
+#define IMX6SL_CLK_USDHC4_PODF		69
+#define IMX6SL_CLK_SSI1_PRED		70
+#define IMX6SL_CLK_SSI1_PODF		71
+#define IMX6SL_CLK_SSI2_PRED		72
+#define IMX6SL_CLK_SSI2_PODF		73
+#define IMX6SL_CLK_SSI3_PRED		74
+#define IMX6SL_CLK_SSI3_PODF		75
+#define IMX6SL_CLK_PERCLK		76
+#define IMX6SL_CLK_PXP_AXI_PODF		77
+#define IMX6SL_CLK_EPDC_AXI_PODF	78
+#define IMX6SL_CLK_GPU2D_OVG_PODF	79
+#define IMX6SL_CLK_GPU2D_PODF		80
+#define IMX6SL_CLK_LCDIF_PIX_PRED	81
+#define IMX6SL_CLK_EPDC_PIX_PRED	82
+#define IMX6SL_CLK_LCDIF_PIX_PODF	83
+#define IMX6SL_CLK_EPDC_PIX_PODF	84
+#define IMX6SL_CLK_SPDIF0_PRED		85
+#define IMX6SL_CLK_SPDIF0_PODF		86
+#define IMX6SL_CLK_SPDIF1_PRED		87
+#define IMX6SL_CLK_SPDIF1_PODF		88
+#define IMX6SL_CLK_EXTERN_AUDIO_PRED	89
+#define IMX6SL_CLK_EXTERN_AUDIO_PODF	90
+#define IMX6SL_CLK_ECSPI_ROOT		91
+#define IMX6SL_CLK_UART_ROOT		92
+#define IMX6SL_CLK_AHB			93
+#define IMX6SL_CLK_MMDC_ROOT		94
+#define IMX6SL_CLK_ARM			95
+#define IMX6SL_CLK_ECSPI1		96
+#define IMX6SL_CLK_ECSPI2		97
+#define IMX6SL_CLK_ECSPI3		98
+#define IMX6SL_CLK_ECSPI4		99
+#define IMX6SL_CLK_EPIT1		100
+#define IMX6SL_CLK_EPIT2		101
+#define IMX6SL_CLK_EXTERN_AUDIO		102
+#define IMX6SL_CLK_GPT			103
+#define IMX6SL_CLK_GPT_SERIAL		104
+#define IMX6SL_CLK_GPU2D_OVG		105
+#define IMX6SL_CLK_I2C1			106
+#define IMX6SL_CLK_I2C2			107
+#define IMX6SL_CLK_I2C3			108
+#define IMX6SL_CLK_OCOTP		109
+#define IMX6SL_CLK_CSI			110
+#define IMX6SL_CLK_PXP_AXI		111
+#define IMX6SL_CLK_EPDC_AXI		112
+#define IMX6SL_CLK_LCDIF_AXI		113
+#define IMX6SL_CLK_LCDIF_PIX		114
+#define IMX6SL_CLK_EPDC_PIX		115
+#define IMX6SL_CLK_OCRAM		116
+#define IMX6SL_CLK_PWM1			117
+#define IMX6SL_CLK_PWM2			118
+#define IMX6SL_CLK_PWM3			119
+#define IMX6SL_CLK_PWM4			120
+#define IMX6SL_CLK_SDMA			121
+#define IMX6SL_CLK_SPDIF		122
+#define IMX6SL_CLK_SSI1			123
+#define IMX6SL_CLK_SSI2			124
+#define IMX6SL_CLK_SSI3			125
+#define IMX6SL_CLK_UART			126
+#define IMX6SL_CLK_UART_SERIAL		127
+#define IMX6SL_CLK_USBOH3		128
+#define IMX6SL_CLK_USDHC1		129
+#define IMX6SL_CLK_USDHC2		130
+#define IMX6SL_CLK_USDHC3		131
+#define IMX6SL_CLK_USDHC4		132
+#define IMX6SL_CLK_CLK_END		133
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */

include/dt-bindings/clock/vf610-clock.h

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_VF610_H
+#define __DT_BINDINGS_CLOCK_VF610_H
+
+#define VF610_CLK_DUMMY			0
+#define VF610_CLK_SIRC_128K		1
+#define VF610_CLK_SIRC_32K		2
+#define VF610_CLK_FIRC			3
+#define VF610_CLK_SXOSC			4
+#define VF610_CLK_FXOSC			5
+#define VF610_CLK_FXOSC_HALF		6
+#define VF610_CLK_SLOW_CLK_SEL		7
+#define VF610_CLK_FASK_CLK_SEL		8
+#define VF610_CLK_AUDIO_EXT		9
+#define VF610_CLK_ENET_EXT		10
+#define VF610_CLK_PLL1_MAIN		11
+#define VF610_CLK_PLL1_PFD1		12
+#define VF610_CLK_PLL1_PFD2		13
+#define VF610_CLK_PLL1_PFD3		14
+#define VF610_CLK_PLL1_PFD4		15
+#define VF610_CLK_PLL2_MAIN		16
+#define VF610_CLK_PLL2_PFD1		17
+#define VF610_CLK_PLL2_PFD2		18
+#define VF610_CLK_PLL2_PFD3		19
+#define VF610_CLK_PLL2_PFD4		20
+#define VF610_CLK_PLL3_MAIN		21
+#define VF610_CLK_PLL3_PFD1		22
+#define VF610_CLK_PLL3_PFD2		23
+#define VF610_CLK_PLL3_PFD3		24
+#define VF610_CLK_PLL3_PFD4		25
+#define VF610_CLK_PLL4_MAIN		26
+#define VF610_CLK_PLL5_MAIN		27
+#define VF610_CLK_PLL6_MAIN		28
+#define VF610_CLK_PLL3_MAIN_DIV		29
+#define VF610_CLK_PLL4_MAIN_DIV		30
+#define VF610_CLK_PLL6_MAIN_DIV		31
+#define VF610_CLK_PLL1_PFD_SEL		32
+#define VF610_CLK_PLL2_PFD_SEL		33
+#define VF610_CLK_SYS_SEL		34
+#define VF610_CLK_DDR_SEL		35
+#define VF610_CLK_SYS_BUS		36
+#define VF610_CLK_PLATFORM_BUS		37
+#define VF610_CLK_IPG_BUS		38
+#define VF610_CLK_UART0			39
+#define VF610_CLK_UART1			40
+#define VF610_CLK_UART2			41
+#define VF610_CLK_UART3			42
+#define VF610_CLK_UART4			43
+#define VF610_CLK_UART5			44
+#define VF610_CLK_PIT			45
+#define VF610_CLK_I2C0			46
+#define VF610_CLK_I2C1			47
+#define VF610_CLK_I2C2			48
+#define VF610_CLK_I2C3			49
+#define VF610_CLK_FTM0_EXT_SEL		50
+#define VF610_CLK_FTM0_FIX_SEL		51
+#define VF610_CLK_FTM0_EXT_FIX_EN	52
+#define VF610_CLK_FTM1_EXT_SEL		53
+#define VF610_CLK_FTM1_FIX_SEL		54
+#define VF610_CLK_FTM1_EXT_FIX_EN	55
+#define VF610_CLK_FTM2_EXT_SEL		56
+#define VF610_CLK_FTM2_FIX_SEL		57
+#define VF610_CLK_FTM2_EXT_FIX_EN	58
+#define VF610_CLK_FTM3_EXT_SEL		59
+#define VF610_CLK_FTM3_FIX_SEL		60
+#define VF610_CLK_FTM3_EXT_FIX_EN	61
+#define VF610_CLK_FTM0			62
+#define VF610_CLK_FTM1			63
+#define VF610_CLK_FTM2			64
+#define VF610_CLK_FTM3			65
+#define VF610_CLK_ENET_50M		66
+#define VF610_CLK_ENET_25M		67
+#define VF610_CLK_ENET_SEL		68
+#define VF610_CLK_ENET			69
+#define VF610_CLK_ENET_TS_SEL		70
+#define VF610_CLK_ENET_TS		71
+#define VF610_CLK_DSPI0			72
+#define VF610_CLK_DSPI1			73
+#define VF610_CLK_DSPI2			74
+#define VF610_CLK_DSPI3			75
+#define VF610_CLK_WDT			76
+#define VF610_CLK_ESDHC0_SEL		77
+#define VF610_CLK_ESDHC0_EN		78
+#define VF610_CLK_ESDHC0_DIV		79
+#define VF610_CLK_ESDHC0		80
+#define VF610_CLK_ESDHC1_SEL		81
+#define VF610_CLK_ESDHC1_EN		82
+#define VF610_CLK_ESDHC1_DIV		83
+#define VF610_CLK_ESDHC1		84
+#define VF610_CLK_DCU0_SEL		85
+#define VF610_CLK_DCU0_EN		86
+#define VF610_CLK_DCU0_DIV		87
+#define VF610_CLK_DCU0			88
+#define VF610_CLK_DCU1_SEL		89
+#define VF610_CLK_DCU1_EN		90
+#define VF610_CLK_DCU1_DIV		91
+#define VF610_CLK_DCU1			92
+#define VF610_CLK_ESAI_SEL		93
+#define VF610_CLK_ESAI_EN		94
+#define VF610_CLK_ESAI_DIV		95
+#define VF610_CLK_ESAI			96
+#define VF610_CLK_SAI0_SEL		97
+#define VF610_CLK_SAI0_EN		98
+#define VF610_CLK_SAI0_DIV		99
+#define VF610_CLK_SAI0			100
+#define VF610_CLK_SAI1_SEL		101
+#define VF610_CLK_SAI1_EN		102
+#define VF610_CLK_SAI1_DIV		103
+#define VF610_CLK_SAI1			104
+#define VF610_CLK_SAI2_SEL		105
+#define VF610_CLK_SAI2_EN		106
+#define VF610_CLK_SAI2_DIV		107
+#define VF610_CLK_SAI2			108
+#define VF610_CLK_SAI3_SEL		109
+#define VF610_CLK_SAI3_EN		110
+#define VF610_CLK_SAI3_DIV		111
+#define VF610_CLK_SAI3			112
+#define VF610_CLK_USBC0			113
+#define VF610_CLK_USBC1			114
+#define VF610_CLK_QSPI0_SEL		115
+#define VF610_CLK_QSPI0_EN		116
+#define VF610_CLK_QSPI0_X4_DIV		117
+#define VF610_CLK_QSPI0_X2_DIV		118
+#define VF610_CLK_QSPI0_X1_DIV		119
+#define VF610_CLK_QSPI1_SEL		120
+#define VF610_CLK_QSPI1_EN		121
+#define VF610_CLK_QSPI1_X4_DIV		122
+#define VF610_CLK_QSPI1_X2_DIV		123
+#define VF610_CLK_QSPI1_X1_DIV		124
+#define VF610_CLK_QSPI0			125
+#define VF610_CLK_QSPI1			126
+#define VF610_CLK_NFC_SEL		127
+#define VF610_CLK_NFC_EN		128
+#define VF610_CLK_NFC_PRE_DIV		129
+#define VF610_CLK_NFC_FRAC_DIV		130
+#define VF610_CLK_NFC_INV		131
+#define VF610_CLK_NFC			132
+#define VF610_CLK_VADC_SEL		133
+#define VF610_CLK_VADC_EN		134
+#define VF610_CLK_VADC_DIV		135
+#define VF610_CLK_VADC_DIV_HALF		136
+#define VF610_CLK_VADC			137
+#define VF610_CLK_ADC0			138
+#define VF610_CLK_ADC1			139
+#define VF610_CLK_DAC0			140
+#define VF610_CLK_DAC1			141
+#define VF610_CLK_FLEXCAN0		142
+#define VF610_CLK_FLEXCAN1		143
+#define VF610_CLK_ASRC			144
+#define VF610_CLK_GPU_SEL		145
+#define VF610_CLK_GPU_EN		146
+#define VF610_CLK_GPU2D			147
+#define VF610_CLK_END			148
+
+#endif /* __DT_BINDINGS_CLOCK_VF610_H */