Commit f28d7de6 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Jason Cooper

ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER

DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
driver. As expected for irqchip drivers, it uses a C-style
interrupt handler and therefore selects MULTI_IRQ_HANDLER.

Now, compiling a kernel with both non-DT and DT support enabled,
selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
non-DT boards.

Therefore, we provide a C-style irq handler even for non-DT boards,
if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
in orion_irq_init this is transparent to all non-DT board files.

While the regression report was filed on Marvell Kirkwood, also
Marvell Dove non-DT boards are affected and fixed by this patch.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: default avatarIan Campbell <ijc@hellion.org.uk>
Reported-by: default avatarIan Campbell <ijc@hellion.org.uk>
Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 2326f043 ("ARM: kirkwood: convert to DT irqchip and clocksource")
Fixes: f07d73e3 ("ARM: dove: convert to DT irqchip and clocksource")
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent f8b94beb
...@@ -15,8 +15,51 @@ ...@@ -15,8 +15,51 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/of_address.h> #include <linux/of_address.h>
#include <linux/of_irq.h> #include <linux/of_irq.h>
#include <asm/exception.h>
#include <plat/irq.h> #include <plat/irq.h>
#include <plat/orion-gpio.h> #include <plat/orion-gpio.h>
#include <mach/bridge-regs.h>
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*
* Notes:
* - this is prepared for Kirkwood and Dove only, update
* accordingly if you add Orion5x or MV78x00.
* - Orion5x uses different macro names and has only one
* set of CAUSE/MASK registers.
* - MV78x00 uses the same macro names but has a third
* set of CAUSE/MASK registers.
*
*/
static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
asmlinkage void
__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
{
u32 stat;
stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
if (stat) {
unsigned int hwirq = __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
if (stat) {
unsigned int hwirq = 32 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
}
#endif
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{ {
...@@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ...@@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion_legacy_handle_irq);
#endif
} }
#ifdef CONFIG_OF #ifdef CONFIG_OF
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment