Merge branches 'cleanups/mxs', 'cleanups/mx3-defconfig' and...

Merge branches 'cleanups/mxs', 'cleanups/mx3-defconfig' and 'cleanups/includes' into imx-cleanups-for-arnd

arch/arm/configs/mx3_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -13,20 +12,21 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
@@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 CONFIG_VFP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -52,7 +51,6 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -62,24 +60,27 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_IMX=y
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -89,12 +90,15 @@ CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
 CONFIG_MFD_WM8350_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_WM8350=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,9 +109,26 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_FSL_USB2=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
@@ -119,6 +140,5 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -36,6 +36,7 @@
 
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"

arch/arm/mach-imx/mach-pcm038.c

@@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+	__raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
+	__raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
+	__raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
 }
 
 static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {

arch/arm/mach-imx/mach-qong.c

@@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */

arch/arm/mach-imx/pm-imx27.c

@@ -11,7 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
 {

arch/arm/plat-mxc/include/mach/mx27.h

@@ -24,10 +24,6 @@
 #ifndef __MACH_MX27_H__
 #define __MACH_MX27_H__
 
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_SIZE			SZ_1M
 #define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
@@ -131,16 +127,6 @@
 #define MX27_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX27_IO_ADDRESS(x)		IOMEM(MX27_IO_P2V(x))
 
-#ifndef __ASSEMBLER__
-static inline void mx27_setup_weimcs(size_t cs,
-		unsigned upper, unsigned lower, unsigned addional)
-{
-	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
-	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
-	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
-}
-#endif
-
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2

arch/arm/plat-mxc/include/mach/mx31.h

 #ifndef __MACH_MX31_H__
 #define __MACH_MX31_H__
 
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
 /*
  * IRAM
  */
@@ -122,16 +118,6 @@
 #define MX31_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX31_IO_ADDRESS(x)		IOMEM(MX31_IO_P2V(x))
 
-#ifndef __ASSEMBLER__
-static inline void mx31_setup_weimcs(size_t cs,
-		unsigned upper, unsigned lower, unsigned addional)
-{
-	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
-	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
-	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
-}
-#endif
-
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5

drivers/mmc/host/mxcmmc.c

@@ -40,6 +40,7 @@
 #include <mach/mmc.h>
 
 #include <mach/dma.h>
+#include <mach/hardware.h>
 
 #define DRIVER_NAME "mxc-mmc"