Commit f2dde1ed authored by Changbin Du's avatar Changbin Du Committed by Rafael J. Wysocki

Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST

This converts the plain text documentation to reStructuredText format
and adds it to Sphinx TOC tree.

No essential content change.
Signed-off-by: default avatarChangbin Du <changbin.du@gmail.com>
Reviewed-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 011eed59
Graphs
.. SPDX-License-Identifier: GPL-2.0
======
Graphs
======
_DSD
----
====
_DSD (Device Specific Data) [7] is a predefined ACPI device
configuration object that can be used to convey information on
......@@ -30,7 +33,7 @@ hierarchical data extension array on each depth.
Ports and endpoints
-------------------
===================
The port and endpoint concepts are very similar to those in Devicetree
[3]. A port represents an interface in a device, and an endpoint
......@@ -38,9 +41,9 @@ represents a connection to that interface.
All port nodes are located under the device's "_DSD" node in the hierarchical
data extension tree. The data extension related to each port node must begin
with "port" and must be followed by the "@" character and the number of the port
as its key. The target object it refers to should be called "PRTX", where "X" is
the number of the port. An example of such a package would be:
with "port" and must be followed by the "@" character and the number of the
port as its key. The target object it refers to should be called "PRTX", where
"X" is the number of the port. An example of such a package would be::
Package() { "port@4", PRT4 }
......@@ -49,7 +52,7 @@ data extension key of the endpoint nodes must begin with
"endpoint" and must be followed by the "@" character and the number of the
endpoint. The object it refers to should be called "EPXY", where "X" is the
number of the port and "Y" is the number of the endpoint. An example of such a
package would be:
package would be::
Package() { "endpoint@0", EP40 }
......@@ -62,85 +65,85 @@ of that port shall be zero. Similarly, if a port may only have a single
endpoint, the number of that endpoint shall be zero.
The endpoint reference uses property extension with "remote-endpoint" property
name followed by a reference in the same package. Such references consist of the
name followed by a reference in the same package. Such references consist of
the remote device reference, the first package entry of the port data extension
reference under the device and finally the first package entry of the endpoint
data extension reference under the port. Individual references thus appear as:
data extension reference under the port. Individual references thus appear as::
Package() { device, "port@X", "endpoint@Y" }
In the above example, "X" is the number of the port and "Y" is the number of the
endpoint.
In the above example, "X" is the number of the port and "Y" is the number of
the endpoint.
The references to endpoints must be always done both ways, to the
remote endpoint and back from the referred remote endpoint node.
A simple example of this is show below:
A simple example of this is show below::
Scope (\_SB.PCI0.I2C2)
{
Device (CAM0)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "compatible", Package () { "nokia,smia" } },
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "port@0", PRT0 },
}
})
Name (PRT0, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "endpoint@0", EP00 },
}
})
Name (EP00, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
}
})
}
Device (CAM0)
{
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "compatible", Package () { "nokia,smia" } },
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "port@0", PRT0 },
}
})
Name (PRT0, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "endpoint@0", EP00 },
}
})
Name (EP00, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } },
}
})
}
}
Scope (\_SB.PCI0)
{
Device (ISP)
{
Name (_DSD, Package () {
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "port@4", PRT4 },
}
})
Name (PRT4, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 4 }, /* CSI-2 port number */
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "endpoint@0", EP40 },
}
})
Name (EP40, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
}
})
}
Device (ISP)
{
Name (_DSD, Package () {
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "port@4", PRT4 },
}
})
Name (PRT4, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 4 }, /* CSI-2 port number */
},
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "endpoint@0", EP40 },
}
})
Name (EP40, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "reg", 0 },
Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } },
}
})
}
}
Here, the port 0 of the "CAM0" device is connected to the port 4 of
......@@ -148,27 +151,27 @@ the "ISP" device and vice versa.
References
----------
==========
[1] _DSD (Device Specific Data) Implementation Guide.
<URL:http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm>,
http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm,
referenced 2016-10-03.
[2] Devicetree. <URL:http://www.devicetree.org>, referenced 2016-10-03.
[2] Devicetree. http://www.devicetree.org, referenced 2016-10-03.
[3] Documentation/devicetree/bindings/graph.txt
[4] Device Properties UUID For _DSD.
<URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf,
referenced 2016-10-04.
[5] Hierarchical Data Extension UUID For _DSD.
<URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf,
referenced 2016-10-04.
[6] Advanced Configuration and Power Interface Specification.
<URL:http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf>,
http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf,
referenced 2016-10-04.
[7] _DSD Device Properties Usage Rules.
Documentation/acpi/DSD-properties-rules.txt
:doc:`../DSD-properties-rules`
......@@ -8,6 +8,7 @@ ACPI Support
:maxdepth: 1
namespace
dsd/graph
enumeration
osi
method-customizing
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment