Commit f2e60041 authored by David Lechner's avatar David Lechner Committed by Kishon Vijay Abraham I

phy: da8xx-usb: new driver for DA8xx SoC USB PHY

This is a new phy driver for the SoC USB controllers on the TI DA8xx
family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
The USB 2.0 PHY also allows overriding the VBUS and ID pins.
Signed-off-by: default avatarDavid Lechner <david@lechnology.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 5358aa3e
......@@ -44,6 +44,16 @@ config ARMADA375_USBCLUSTER_PHY
depends on OF && HAS_IOMEM
select GENERIC_PHY
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
depends on ARCH_DAVINCI_DA8XX
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the USB PHY on DA8xx SoCs.
This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
depends on ARCH_OMAP2PLUS
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
......
/*
* phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
*
* Copyright (C) 2016 David Lechner <david@lechnology.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
struct da8xx_usb_phy {
struct phy_provider *phy_provider;
struct phy *usb11_phy;
struct phy *usb20_phy;
struct clk *usb11_clk;
struct clk *usb20_clk;
struct regmap *regmap;
};
static int da8xx_usb11_phy_power_on(struct phy *phy)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(d_phy->usb11_clk);
if (ret)
return ret;
regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
CFGCHIP2_USB1SUSPENDM);
return 0;
}
static int da8xx_usb11_phy_power_off(struct phy *phy)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
clk_disable_unprepare(d_phy->usb11_clk);
return 0;
}
static const struct phy_ops da8xx_usb11_phy_ops = {
.power_on = da8xx_usb11_phy_power_on,
.power_off = da8xx_usb11_phy_power_off,
.owner = THIS_MODULE,
};
static int da8xx_usb20_phy_power_on(struct phy *phy)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(d_phy->usb20_clk);
if (ret)
return ret;
regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
return 0;
}
static int da8xx_usb20_phy_power_off(struct phy *phy)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
CFGCHIP2_OTGPWRDN);
clk_disable_unprepare(d_phy->usb20_clk);
return 0;
}
static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
u32 val;
switch (mode) {
case PHY_MODE_USB_HOST: /* Force VBUS valid, ID = 0 */
val = CFGCHIP2_OTGMODE_FORCE_HOST;
break;
case PHY_MODE_USB_DEVICE: /* Force VBUS valid, ID = 1 */
val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
break;
case PHY_MODE_USB_OTG: /* Don't override the VBUS/ID comparators */
val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
break;
default:
return -EINVAL;
}
regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK,
val);
return 0;
}
static const struct phy_ops da8xx_usb20_phy_ops = {
.power_on = da8xx_usb20_phy_power_on,
.power_off = da8xx_usb20_phy_power_off,
.set_mode = da8xx_usb20_phy_set_mode,
.owner = THIS_MODULE,
};
static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
if (!d_phy)
return ERR_PTR(-ENODEV);
switch (args->args[0]) {
case 0:
return d_phy->usb20_phy;
case 1:
return d_phy->usb11_phy;
default:
return ERR_PTR(-EINVAL);
}
}
static int da8xx_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
struct da8xx_usb_phy *d_phy;
d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
if (!d_phy)
return -ENOMEM;
if (node)
d_phy->regmap = syscon_regmap_lookup_by_compatible(
"ti,da830-cfgchip");
else
d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
if (IS_ERR(d_phy->regmap)) {
dev_err(dev, "Failed to get syscon\n");
return PTR_ERR(d_phy->regmap);
}
d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
if (IS_ERR(d_phy->usb11_clk)) {
dev_err(dev, "Failed to get usb11_phy clock\n");
return PTR_ERR(d_phy->usb11_clk);
}
d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
if (IS_ERR(d_phy->usb20_clk)) {
dev_err(dev, "Failed to get usb20_phy clock\n");
return PTR_ERR(d_phy->usb20_clk);
}
d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
if (IS_ERR(d_phy->usb11_phy)) {
dev_err(dev, "Failed to create usb11 phy\n");
return PTR_ERR(d_phy->usb11_phy);
}
d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
if (IS_ERR(d_phy->usb20_phy)) {
dev_err(dev, "Failed to create usb20 phy\n");
return PTR_ERR(d_phy->usb20_phy);
}
platform_set_drvdata(pdev, d_phy);
phy_set_drvdata(d_phy->usb11_phy, d_phy);
phy_set_drvdata(d_phy->usb20_phy, d_phy);
if (node) {
d_phy->phy_provider = devm_of_phy_provider_register(dev,
da8xx_usb_phy_of_xlate);
if (IS_ERR(d_phy->phy_provider)) {
dev_err(dev, "Failed to create phy provider\n");
return PTR_ERR(d_phy->phy_provider);
}
} else {
int ret;
ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
if (ret)
dev_warn(dev, "Failed to create usb11 phy lookup\n");
ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
"musb-da8xx");
if (ret)
dev_warn(dev, "Failed to create usb20 phy lookup\n");
}
return 0;
}
static int da8xx_usb_phy_remove(struct platform_device *pdev)
{
struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev);
if (!pdev->dev.of_node) {
phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
}
return 0;
}
static const struct of_device_id da8xx_usb_phy_ids[] = {
{ .compatible = "ti,da830-usb-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids);
static struct platform_driver da8xx_usb_phy_driver = {
.probe = da8xx_usb_phy_probe,
.remove = da8xx_usb_phy_remove,
.driver = {
.name = "da8xx-usb-phy",
.of_match_table = da8xx_usb_phy_ids,
},
};
module_platform_driver(da8xx_usb_phy_driver);
MODULE_ALIAS("platform:da8xx-usb-phy");
MODULE_AUTHOR("David Lechner <david@lechnology.com>");
MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment