ide-floppy: remove IDEFLOPPY_DEBUG_INFO

This info is already available through ioctl() and /proc

Bart:
- dump 'gcw.packet_size' for unsupported packet sizes
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-floppy.c

@@ -47,11 +47,8 @@
 #include <linux/io.h>
 #include <asm/unaligned.h>
 
-/*
- *	The following are used to debug the driver.
- */
+/* define to see debug info */
 #define IDEFLOPPY_DEBUG_LOG		0
-#define IDEFLOPPY_DEBUG_INFO		0
 
 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
 #define IDEFLOPPY_DEBUG( fmt, args... )
@@ -1303,15 +1300,12 @@ static sector_t idefloppy_capacity (ide_drive_t *drive)
 }
 
 /*
- *	idefloppy_identify_device checks if we can support a drive,
- *	based on the ATAPI IDENTIFY command results.
+ * Check whether we can support a drive, based on the ATAPI IDENTIFY command
+ * results.
  */
-static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
+static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
 {
 	struct idefloppy_id_gcw gcw;
-#if IDEFLOPPY_DEBUG_INFO
-	char buffer[80];
-#endif /* IDEFLOPPY_DEBUG_INFO */
 
 	*((u16 *) &gcw) = id->config;
 
@@ -1320,54 +1314,23 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
 	if ((gcw.device_type == 5) &&
 	    !strstr(id->model, "CD-ROM") &&
 	    strstr(id->model, "ZIP"))
-		gcw.device_type = 0;			
+		gcw.device_type = 0;
 #endif
 
-#if IDEFLOPPY_DEBUG_INFO
-	printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n");
-	switch (gcw.protocol) {
-		case 0: case 1: sprintf(buffer, "ATA");break;
-		case 2:	sprintf(buffer, "ATAPI");break;
-		case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break;
-	}
-	printk(KERN_INFO "Protocol Type: %s\n", buffer);
-	switch (gcw.device_type) {
-		case 0: sprintf(buffer, "Direct-access Device");break;
-		case 1: sprintf(buffer, "Streaming Tape Device");break;
-		case 2: case 3: case 4: sprintf (buffer, "Reserved");break;
-		case 5: sprintf(buffer, "CD-ROM Device");break;
-		case 6: sprintf(buffer, "Reserved");
-		case 7: sprintf(buffer, "Optical memory Device");break;
-		case 0x1f: sprintf(buffer, "Unknown or no Device type");break;
-		default: sprintf(buffer, "Reserved");
-	}
-	printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer);
-	printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");	
-	switch (gcw.drq_type) {
-		case 0: sprintf(buffer, "Microprocessor DRQ");break;
-		case 1: sprintf(buffer, "Interrupt DRQ");break;
-		case 2: sprintf(buffer, "Accelerated DRQ");break;
-		case 3: sprintf(buffer, "Reserved");break;
-	}
-	printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer);
-	switch (gcw.packet_size) {
-		case 0: sprintf(buffer, "12 bytes");break;
-		case 1: sprintf(buffer, "16 bytes");break;
-		default: sprintf(buffer, "Reserved");break;
-	}
-	printk(KERN_INFO "Command Packet Size: %s\n", buffer);
-#endif /* IDEFLOPPY_DEBUG_INFO */
-
 	if (gcw.protocol != 2)
-		printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n");
+		printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
+				gcw.protocol);
 	else if (gcw.device_type != 0)
-		printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n");
+		printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
+				"to floppy\n", gcw.device_type);
 	else if (!gcw.removable)
 		printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
 	else if (gcw.drq_type == 3) {
-		printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type);
+		printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
+				"supported\n", gcw.drq_type);
 	} else if (gcw.packet_size != 0) {
-		printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n");
+		printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
+				"bytes long\n", gcw.packet_size);
 	} else
 		return 1;
 	return 0;