Staging: rt2870: remove WPA_SUPPLICANT_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2870/Makefile

@@ -5,7 +5,6 @@ EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
 EXTRA_CFLAGS += -DRT2870
 EXTRA_CFLAGS += -DDBG
 EXTRA_CFLAGS += -DDOT11_N_SUPPORT
-EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT
 
 rt2870sta-objs :=		\
 	common/md5.o		\

drivers/staging/rt2870/common/cmm_wpa.c

@@ -625,14 +625,12 @@ VOID RTMPMakeRSNIE(
 	{
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
-#ifdef WPA_SUPPLICANT_SUPPORT
 			if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
 			{
 				if (AuthMode < Ndis802_11AuthModeWPA)
 					return;
 			}
 			else
-#endif // WPA_SUPPLICANT_SUPPORT //
 			{
 				// Support WPAPSK or WPA2PSK in STA-Infra mode
 				// Support WPANone in STA-Adhoc mode

drivers/staging/rt2870/common/mlme.c

@@ -939,9 +939,7 @@ VOID STAMlmePeriodicExec(
 	ULONG	TxTotalCnt;
 	int 	i;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
-#endif // WPA_SUPPLICANT_SUPPORT //
     {
     	// WPA MIC error should block association attempt for 60 seconds
     	if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32))

drivers/staging/rt2870/common/rtmp_init.c

@@ -3316,13 +3316,10 @@ VOID	UserCfgInit(
 		NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1);
 		sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME);
 		RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE);
-#ifdef WPA_SUPPLICANT_SUPPORT
 		pAd->StaCfg.IEEE8021X = FALSE;
 		pAd->StaCfg.IEEE8021x_required_keys = FALSE;
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
 		pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
-#endif // WPA_SUPPLICANT_SUPPORT //
-
 	}
 
 	// Default for extra information is not valid

drivers/staging/rt2870/oid.h

@@ -157,7 +157,7 @@
 #define	RT_OID_802_11_QUERY_LAST_RX_RATE			0x0613
 #define	RT_OID_802_11_TX_POWER_LEVEL_1				0x0614
 #define	RT_OID_802_11_QUERY_PIDVID					0x0615
-//for WPA_SUPPLICANT_SUPPORT
+
 #define OID_SET_COUNTERMEASURES                     0x0616
 #define OID_802_11_SET_IEEE8021X                    0x0617
 #define OID_802_11_SET_IEEE8021X_REQUIRE_KEY        0x0618

drivers/staging/rt2870/rt2870.h

@@ -608,13 +608,6 @@ typedef	struct	_CmdQ	{
 	UINT32		CmdQState;
 }CmdQ, *PCmdQ;
 
-//
-// For WPA SUPPLICANT: WIRELESS EXT support wireless events: v14 or newer
-//
-#if WIRELESS_EXT >= 14
-//#define WPA_SUPPLICANT_SUPPORT  1
-#endif
-
 /* oid.h */
 // Cipher suite type for mixed mode group cipher, P802.11i-2004
 typedef enum _RT_802_11_CIPHER_SUITE_TYPE {

drivers/staging/rt2870/rt_config.h

@@ -67,10 +67,6 @@
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#ifndef WPA_SUPPLICANT_SUPPORT
-#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y"
-#endif // WPA_SUPPLICANT_SUPPORT //
-
 #ifdef IKANOS_VX_1X0
 #include	"vr_ikans.h"
 #endif // IKANOS_VX_1X0 //

drivers/staging/rt2870/rt_profile.c

@@ -1277,12 +1277,10 @@ NDIS_STATUS	RTMPReadParametersHook(
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
 							else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-#ifdef WPA_SUPPLICANT_SUPPORT
 							else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
 							else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
-#endif // WPA_SUPPLICANT_SUPPORT //
 				                        else
 				                            pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
 

drivers/staging/rt2870/rtmp.h

@@ -1949,7 +1949,6 @@ typedef struct _STA_ADMIN_CONFIG {
 	BOOLEAN		        bFastRoaming;       // 0:disable fast roaming, 1:enable fast roaming
 	CHAR		        dBmToRoam;          // the condition to roam when receiving Rssi less than this value. It's negative value.
 
-#ifdef WPA_SUPPLICANT_SUPPORT
     BOOLEAN             IEEE8021X;
     BOOLEAN             IEEE8021x_required_keys;
     CIPHER_KEY	        DesireSharedKey[4];	// Record user desired WEP keys
@@ -1960,7 +1959,6 @@ typedef struct _STA_ADMIN_CONFIG {
     // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
     UCHAR               WpaSupplicantUP;
 	UCHAR				WpaSupplicantScanCount;
-#endif // WPA_SUPPLICANT_SUPPORT //
 
     CHAR                dev_name[16];
     USHORT              OriDevType;
@@ -5851,7 +5849,6 @@ VOID QueryBATABLE(
 	OUT PQUERYBA_TABLE pBAT);
 #endif // DOT11_N_SUPPORT //
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 INT	    WpaCheckEapCode(
 	IN  PRTMP_ADAPTER   	pAd,
 	IN  PUCHAR				pFrame,
@@ -5864,7 +5861,6 @@ VOID    WpaSendMicFailureToWpaSupplicant(
 
 VOID    SendAssocIEsToWpaSupplicant(
     IN  PRTMP_ADAPTER       pAd);
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 int wext_notify_event_assoc(
 	IN  RTMP_ADAPTER *pAd);

drivers/staging/rt2870/sta/connect.c

@@ -260,9 +260,8 @@ VOID CntlIdleProc(
 			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
 			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
-#ifdef WPA_SUPPLICANT_SUPPORT
+
             if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI)
-#endif // WPA_SUPPLICANT_SUPPORT //
             {
     			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
     			// Since calling this indicate user don't want to connect to that SSID anymore.
@@ -1479,15 +1478,11 @@ VOID LinkUp(
 
 
 		// If WEP is enabled, add paiewise and shared key
-#ifdef WPA_SUPPLICANT_SUPPORT
         if (((pAd->StaCfg.WpaSupplicantUP)&&
              (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&&
              (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
             ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&&
               (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)))
-#else
-		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			PUCHAR	Key;
 			UCHAR 	CipherAlg;
@@ -1915,7 +1910,7 @@ VOID LinkDown(
 	}
 
 	// 802.1x port control
-#ifdef WPA_SUPPLICANT_SUPPORT
+
 	// Prevent clear PortSecured here with static WEP
 	// NetworkManger set security policy first then set SSID to connect AP.
 	if (pAd->StaCfg.WpaSupplicantUP &&
@@ -1925,7 +1920,6 @@ VOID LinkDown(
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
 		pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP;

drivers/staging/rt2870/sta/rtmp_data.c

@@ -49,7 +49,6 @@ VOID STARxEAPOLFrameIndicate(
 	PRXWI_STRUC		pRxWI = pRxBlk->pRxWI;
 	UCHAR			*pTmpBuf;
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 	if (pAd->StaCfg.WpaSupplicantUP)
 	{
 		// All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon)
@@ -115,7 +114,6 @@ VOID STARxEAPOLFrameIndicate(
 		}
 	}
 	else
-#endif // WPA_SUPPLICANT_SUPPORT //
 	{
 		// Special DATA frame that has to pass to MLME
 		//	 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process
@@ -235,13 +233,11 @@ BOOLEAN STACheckTkipMICValue(
 	{
 		DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n"));
 
-#ifdef WPA_SUPPLICANT_SUPPORT
 		if (pAd->StaCfg.WpaSupplicantUP)
 		{
 			WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE);
 		}
 		else
-#endif // WPA_SUPPLICANT_SUPPORT //
 		{
 			RTMPReportMicError(pAd, pWpaKey);
 		}
@@ -961,9 +957,7 @@ NDIS_STATUS STASendPacket(
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
 		 (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 		  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif // WPA_SUPPLICANT_SUPPORT //
 		  )
 		  && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2))
 		  && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE)
@@ -1218,9 +1212,7 @@ VOID	RTMPSendNullFrame(
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
          (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
-#ifdef WPA_SUPPLICANT_SUPPORT
 			  || (pAd->StaCfg.IEEE8021X == TRUE)
-#endif
         ) &&
        (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	{
@@ -1341,13 +1333,11 @@ VOID STAFindCipherAlgorithm(
 			CipherAlg = CIPHER_NONE;
 		else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0))
 			CipherAlg = CIPHER_NONE;
-#ifdef WPA_SUPPLICANT_SUPPORT
 	    else if ( pAd->StaCfg.WpaSupplicantUP &&
 	             (Cipher == Ndis802_11Encryption1Enabled) &&
 	             (pAd->StaCfg.IEEE8021X == TRUE) &&
 	             (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
 	        CipherAlg = CIPHER_NONE;
-#endif // WPA_SUPPLICANT_SUPPORT //
 		else
 		{
 			//Header_802_11.FC.Wep = 1;

drivers/staging/rt2870/sta/wpa.c

@@ -1928,8 +1928,6 @@ VOID	RTMPReportMicError(
     }
 }
 
-
-#ifdef WPA_SUPPLICANT_SUPPORT
 #define	LENGTH_EAP_H    4
 // If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)).
 INT	    WpaCheckEapCode(
@@ -1970,7 +1968,6 @@ VOID    WpaSendMicFailureToWpaSupplicant(
 
     return;
 }
-#endif // WPA_SUPPLICANT_SUPPORT //
 
 VOID	WpaMicFailureReportFrame(
 	IN  PRTMP_ADAPTER   pAd,