Commit f5b8aa78 authored by Boris BREZILLON's avatar Boris BREZILLON Committed by Brian Norris

mtd: kill the ecclayout->oobavail field

ecclayout->oobavail is just redundant with the mtd->oobavail field.
Moreover, it prevents static const definition of ecc layouts since the
NAND framework is calculating this value based on the ecclayout->oobfree
field.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent 9ebfdf5b
......@@ -72,13 +72,11 @@ MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
* @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
* @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
* @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
* @oobavail: 8 available bytes remaining after ECC toll
*/
static struct nand_ecclayout docg3_oobinfo = {
.eccbytes = 8,
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
.oobfree = {{0, 7}, {15, 1} },
.oobavail = 8,
};
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
......@@ -1438,7 +1436,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
oobdelta = mtd->oobsize;
break;
case MTD_OPS_AUTO_OOB:
oobdelta = mtd->ecclayout->oobavail;
oobdelta = mtd->oobavail;
break;
default:
return -EINVAL;
......@@ -1860,6 +1858,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->_write_oob = doc_write_oob;
mtd->_block_isbad = doc_block_isbad;
mtd->ecclayout = &docg3_oobinfo;
mtd->oobavail = 8;
mtd->ecc_strength = DOC_ECC_BCH_T;
return 0;
......
......@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset))
return MTDSWAP_SCANNED_BAD;
ops.ooblen = 2 * d->mtd->ecclayout->oobavail;
ops.ooblen = 2 * d->mtd->oobavail;
ops.oobbuf = d->oob_buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
......@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
data = (struct mtdswap_oobdata *)d->oob_buf;
data2 = (struct mtdswap_oobdata *)
(d->oob_buf + d->mtd->ecclayout->oobavail);
(d->oob_buf + d->mtd->oobavail);
if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
eb->erase_count = le32_to_cpu(data->count);
......@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooblen = mtd->oobavail;
ops.ooboffs = 0;
ops.datbuf = d->page_buf;
ops.oobbuf = d->oob_buf;
......@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
for (i = 0; i < mtd_pages; i++) {
patt = mtdswap_test_patt(test + i);
memset(d->page_buf, patt, mtd->writesize);
memset(d->oob_buf, patt, mtd->ecclayout->oobavail);
memset(d->oob_buf, patt, mtd->oobavail);
ret = mtd_write_oob(mtd, pos, &ops);
if (ret)
goto error;
......@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
if (p1[j] != patt)
goto error;
for (j = 0; j < mtd->ecclayout->oobavail; j++)
for (j = 0; j < mtd->oobavail; j++)
if (p2[j] != (unsigned char)patt)
goto error;
......@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_dev *d, unsigned int eblocks,
if (!d->page_buf)
goto page_buf_fail;
d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL);
d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL);
if (!d->oob_buf)
goto oob_buf_fail;
......@@ -1454,10 +1454,10 @@ static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
return;
}
if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) {
if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) {
printk(KERN_ERR "%s: Not enough free bytes in OOB, "
"%d available, %zu needed.\n",
MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE);
return;
}
......
......@@ -828,7 +828,8 @@ static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
break;
}
goto out;
return layout;
}
/*
......@@ -879,10 +880,7 @@ static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
break;
}
out:
/* Sum available OOB */
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE; i++)
layout->oobavail += layout->oobfree[i].length;
return layout;
}
......
......@@ -225,7 +225,6 @@ struct docg4_priv {
static struct nand_ecclayout docg4_oobinfo = {
.eccbytes = 9,
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
.oobavail = 5,
.oobfree = { {.offset = 2, .length = 5} }
};
......
......@@ -632,7 +632,6 @@ static void hisi_nfc_host_init(struct hinfc_host *host)
}
static struct nand_ecclayout nand_ecc_2K_16bits = {
.oobavail = 6,
.oobfree = { {2, 6} },
};
......
......@@ -2076,7 +2076,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
stats = mtd->ecc_stats;
if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
len = mtd->oobavail;
else
len = mtd->oobsize;
......@@ -2767,7 +2767,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
__func__, (unsigned int)to, (int)ops->ooblen);
if (ops->mode == MTD_OPS_AUTO_OOB)
len = chip->ecc.layout->oobavail;
len = mtd->oobavail;
else
len = mtd->oobsize;
......@@ -4325,11 +4325,11 @@ int nand_scan_tail(struct mtd_info *mtd)
* The number of bytes available for a client to place data into
* the out of band area.
*/
ecc->layout->oobavail = 0;
for (i = 0; ecc->layout->oobfree[i].length
&& i < ARRAY_SIZE(ecc->layout->oobfree); i++)
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
mtd->oobavail = 0;
if (ecc->layout) {
for (i = 0; ecc->layout->oobfree[i].length; i++)
mtd->oobavail += ecc->layout->oobfree[i].length;
}
/* ECC sanity check: warn if it's too weak */
if (!nand_ecc_strength_good(mtd))
......
......@@ -1125,7 +1125,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
(int)len);
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
......@@ -1230,7 +1230,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
(int)len);
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
......@@ -1365,7 +1365,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
......@@ -1887,7 +1887,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
return 0;
if (ops->mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
......@@ -2063,7 +2063,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
oobsize = this->ecclayout->oobavail;
oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
......@@ -4050,12 +4050,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
* The number of bytes available for a client to place data into
* the out of band area
*/
this->ecclayout->oobavail = 0;
mtd->oobavail = 0;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
this->ecclayout->oobfree[i].length; i++)
this->ecclayout->oobavail +=
this->ecclayout->oobfree[i].length;
mtd->oobavail = this->ecclayout->oobavail;
mtd->oobavail += this->ecclayout->oobfree[i].length;
mtd->ecclayout = this->ecclayout;
mtd->ecc_strength = 1;
......
......@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum)
pr_info("ignoring error as within bitflip_limit\n");
}
if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
if (use_offset != 0 || use_len < mtd->oobavail) {
int k;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
if (err || ops.oobretlen != mtd->oobavail) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
errcnt += 1;
......@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum)
/* verify post-(use_offset + use_len) area for 0xff */
k = use_offset + use_len;
bitflips += memffshow(addr, k, readbuf + k,
mtd->ecclayout->oobavail - k);
mtd->oobavail - k);
if (bitflips > bitflip_limit) {
pr_err("error: verify failed at %#llx\n",
......@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(int ebnum)
struct mtd_oob_ops ops;
int err = 0;
loff_t addr = (loff_t)ebnum * mtd->erasesize;
size_t len = mtd->ecclayout->oobavail * pgcnt;
size_t oobavail = mtd->ecclayout->oobavail;
size_t len = mtd->oobavail * pgcnt;
size_t oobavail = mtd->oobavail;
size_t bitflips;
int i;
......@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
use_len = mtd->oobavail;
use_len_max = mtd->oobavail;
vary_offset = 0;
/* First test: write all OOB, read it back and verify */
......@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void)
/* Write all eraseblocks */
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
use_len = mtd->oobavail;
use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
......@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void)
/* Check all eraseblocks */
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
use_len = mtd->oobavail;
use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
err = verify_all_eraseblocks();
......@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
use_len = mtd->ecclayout->oobavail;
use_len_max = mtd->ecclayout->oobavail;
use_len = mtd->oobavail;
use_len_max = mtd->oobavail;
vary_offset = 0;
/* Fourth test: try to write off end of device */
......@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
ops.ooboffs = mtd->ecclayout->oobavail;
ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
pr_info("attempting to start write past end of OOB\n");
......@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
ops.ooboffs = mtd->ecclayout->oobavail;
ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
pr_info("attempting to start read past end of OOB\n");
......@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
......@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail + 1;
ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
......@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
......@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail;
ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
......@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
int cnt = 2;
int pg;
size_t sz = mtd->ecclayout->oobavail;
size_t sz = mtd->oobavail;
if (bbt[i] || bbt[i + 1])
continue;
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
......@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
if (bbt[i] || bbt[i + 1])
continue;
prandom_bytes_state(&rnd_state, writebuf,
mtd->ecclayout->oobavail * 2);
prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2);
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
ops.ooblen = mtd->ecclayout->oobavail * 2;
ops.ooblen = mtd->oobavail * 2;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
......@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void)
if (err)
goto out;
if (memcmpshow(addr, readbuf, writebuf,
mtd->ecclayout->oobavail * 2)) {
mtd->oobavail * 2)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
......
......@@ -49,7 +49,6 @@ static struct nand_ecclayout spinand_oob_64 = {
17, 18, 19, 20, 21, 22,
33, 34, 35, 36, 37, 38,
49, 50, 51, 52, 53, 54, },
.oobavail = 32,
.oobfree = {
{.offset = 8,
.length = 8},
......
......@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb_info *c)
int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
struct nand_ecclayout *oinfo = c->mtd->ecclayout;
if (!c->mtd->oobsize)
return 0;
/* Cleanmarker is out-of-band, so inline size zero */
c->cleanmarker_size = 0;
if (!oinfo || oinfo->oobavail == 0) {
if (c->mtd->oobavail == 0) {
pr_err("inconsistent device description\n");
return -EINVAL;
}
jffs2_dbg(1, "using OOB on NAND\n");
c->oobavail = oinfo->oobavail;
c->oobavail = c->mtd->oobavail;
/* Initialise write buffer */
init_rwsem(&c->wbuf_sem);
......
......@@ -105,7 +105,6 @@ struct mtd_oob_ops {
struct nand_ecclayout {
__u32 eccbytes;
__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
__u32 oobavail;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment