drm/nouveau/clk/gk20a: setup slide once during init

Slide setup needs to be performed only once, during init. Also
use the proper parameters for different clock speeds.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.c

@@ -274,12 +274,6 @@ gk20a_pllg_slide(struct gk20a_clk *clk, u32 n)
 	if (n == ((val >> GPCPLL_COEFF_N_SHIFT) & MASK(GPCPLL_COEFF_N_WIDTH)))
 		return 0;
 
-	/* setup */
-	nvkm_mask(device, GPCPLL_CFG2, 0xff << GPCPLL_CFG2_PLL_STEPA_SHIFT,
-		0x2b << GPCPLL_CFG2_PLL_STEPA_SHIFT);
-	nvkm_mask(device, GPCPLL_CFG3, 0xff << GPCPLL_CFG3_PLL_STEPB_SHIFT,
-		0xb << GPCPLL_CFG3_PLL_STEPB_SHIFT);
-
 	/* pll slowdown mode */
 	nvkm_mask(device, GPCPLL_NDIV_SLOWDOWN,
 		BIT(GPCPLL_NDIV_SLOWDOWN_SLOWDOWN_USING_PLL_SHIFT),
@@ -581,6 +575,42 @@ gk20a_clk_tidy(struct nvkm_clk *base)
 {
 }
 
+int
+gk20a_clk_setup_slide(struct gk20a_clk *clk)
+{
+	struct nvkm_subdev *subdev = &clk->base.subdev;
+	struct nvkm_device *device = subdev->device;
+	u32 step_a, step_b;
+
+	switch (clk->parent_rate) {
+	case 12000000:
+	case 12800000:
+	case 13000000:
+		step_a = 0x2b;
+		step_b = 0x0b;
+		break;
+	case 19200000:
+		step_a = 0x12;
+		step_b = 0x08;
+		break;
+	case 38400000:
+		step_a = 0x04;
+		step_b = 0x05;
+		break;
+	default:
+		nvkm_error(subdev, "invalid parent clock rate %u KHz",
+			   clk->parent_rate / KHZ);
+		return -EINVAL;
+	}
+
+	nvkm_mask(device, GPCPLL_CFG2, 0xff << GPCPLL_CFG2_PLL_STEPA_SHIFT,
+		step_a << GPCPLL_CFG2_PLL_STEPA_SHIFT);
+	nvkm_mask(device, GPCPLL_CFG3, 0xff << GPCPLL_CFG3_PLL_STEPB_SHIFT,
+		step_b << GPCPLL_CFG3_PLL_STEPB_SHIFT);
+
+	return 0;
+}
+
 void
 gk20a_clk_fini(struct nvkm_clk *base)
 {
@@ -617,6 +647,10 @@ gk20a_clk_init(struct nvkm_clk *base)
 	nvkm_mask(device, GPC2CLK_OUT, GPC2CLK_OUT_INIT_MASK,
 		  GPC2CLK_OUT_INIT_VAL);
 
+	ret = gk20a_clk_setup_slide(clk);
+	if (ret)
+		return ret;
+
 	/* Start with lowest frequency */
 	base->func->calc(base, &base->func->pstates[0].base);
 	ret = base->func->prog(&clk->base);

drivers/gpu/drm/nouveau/nvkm/subdev/clk/gk20a.h

@@ -62,4 +62,6 @@ int gk20a_clk_calc(struct nvkm_clk *, struct nvkm_cstate *);
 int gk20a_clk_prog(struct nvkm_clk *);
 void gk20a_clk_tidy(struct nvkm_clk *);
 
+int gk20a_clk_setup_slide(struct gk20a_clk *);
+
 #endif

drivers/gpu/drm/nouveau/nvkm/subdev/clk/gm20b.c

@@ -144,6 +144,10 @@ gm20b_clk_init(struct nvkm_clk *base)
 	struct nvkm_device *device = subdev->device;
 	int ret;
 
+	ret = gk20a_clk_setup_slide(clk);
+	if (ret)
+		return ret;
+
 	/* Set the global bypass control to VCO */
 	nvkm_mask(device, BYPASSCTRL_SYS,
 	       MASK(BYPASSCTRL_SYS_GPCPLL_WIDTH) << BYPASSCTRL_SYS_GPCPLL_SHIFT,