Commit f69aa390 authored by Akeem G. Abodunrin's avatar Akeem G. Abodunrin Committed by Jeff Kirsher

igb: Support to read and export SFF-8472/8079 data

This patch adds support to read and export SFF-8472/8079 (SFP data)
over i2c, through Ethtool.

v2: Changed implementation to accommodate any offset within SFF module
    length boundary.
Reported-by: default avatarAurélien Guillaume <footplus@gmail.com>
CC: Aurélien Guillaume <footplus@gmail.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: default avatarAkeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent f502ef7d
......@@ -178,6 +178,14 @@ enum igb_tx_flags {
#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD)
#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
/* EEPROM byte offsets */
#define IGB_SFF_8472_SWAP 0x5C
#define IGB_SFF_8472_COMP 0x5E
/* Bitmasks */
#define IGB_SFF_ADDRESSING_MODE 0x4
#define IGB_SFF_8472_UNSUP 0x00
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct igb_tx_buffer {
......
......@@ -2622,6 +2622,85 @@ static int igb_set_eee(struct net_device *netdev,
return 0;
}
static int igb_get_module_info(struct net_device *netdev,
struct ethtool_modinfo *modinfo)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 status = E1000_SUCCESS;
u16 sff8472_rev, addr_mode;
bool page_swap = false;
if ((hw->phy.media_type == e1000_media_type_copper) ||
(hw->phy.media_type == e1000_media_type_unknown))
return -EOPNOTSUPP;
/* Check whether we support SFF-8472 or not */
status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev);
if (status != E1000_SUCCESS)
return -EIO;
/* addressing mode is not supported */
status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode);
if (status != E1000_SUCCESS)
return -EIO;
/* addressing mode is not supported */
if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) {
hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
page_swap = true;
}
if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) {
/* We have an SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else {
/* We have an SFP which supports a revision of SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
}
return 0;
}
static int igb_get_module_eeprom(struct net_device *netdev,
struct ethtool_eeprom *ee, u8 *data)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 status = E1000_SUCCESS;
u16 *dataword;
u16 first_word, last_word;
int i = 0;
if (ee->len == 0)
return -EINVAL;
first_word = ee->offset >> 1;
last_word = (ee->offset + ee->len - 1) >> 1;
dataword = kmalloc(sizeof(u16) * (last_word - first_word + 1),
GFP_KERNEL);
if (!dataword)
return -ENOMEM;
/* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
for (i = 0; i < last_word - first_word + 1; i++) {
status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
if (status != E1000_SUCCESS)
/* Error occurred while reading module */
return -EIO;
be16_to_cpus(&dataword[i]);
}
memcpy(data, (u8 *)dataword + (ee->offset & 1), ee->len);
kfree(dataword);
return 0;
}
static int igb_ethtool_begin(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
......@@ -2666,6 +2745,8 @@ static const struct ethtool_ops igb_ethtool_ops = {
.set_rxnfc = igb_set_rxnfc,
.get_eee = igb_get_eee,
.set_eee = igb_set_eee,
.get_module_info = igb_get_module_info,
.get_module_eeprom = igb_get_module_eeprom,
.begin = igb_ethtool_begin,
.complete = igb_ethtool_complete,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment