IB/ipath: Remove support for QLogic PCIe QLE devices

The ib_qib driver is taking over support for QLogic PCIe QLE devices,
so remove support for them from ib_ipath.  The ib_ipath driver now
supports only the obsolete QLogic Hyper-Transport IB host channel
adapter (model QHT7140).
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ipath/Kconfig

 config INFINIBAND_IPATH
-	tristate "QLogic InfiniPath Driver"
-	depends on 64BIT && NET
+	tristate "QLogic HTX HCA support"
+	depends on 64BIT && NET && HT_IRQ
 	---help---
-	This is a driver for QLogic InfiniPath host channel adapters,
+	This is a driver for the obsolete QLogic Hyper-Transport
+	IB host channel adapter (model QHT7140),
 	including InfiniBand verbs support.  This driver allows these
 	devices to be used with both kernel upper level protocols such
 	as IP-over-InfiniBand as well as with userspace applications
 	(in conjunction with InfiniBand userspace access).
+	For QLogic PCIe QLE based cards, use the QIB driver instead.

drivers/infiniband/hw/ipath/Makefile

@@ -29,13 +29,9 @@ ib_ipath-y := \
 	ipath_user_pages.o \
 	ipath_user_sdma.o \
 	ipath_verbs_mcast.o \
-	ipath_verbs.o \
-	ipath_iba7220.o \
-	ipath_sd7220.o \
-	ipath_sd7220_img.o
+	ipath_verbs.o
 
 ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
-ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
 
 ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
 ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o

drivers/infiniband/hw/ipath/ipath_7220.h

-#ifndef _IPATH_7220_H
-#define _IPATH_7220_H
-/*
- * Copyright (c) 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This header file provides the declarations and common definitions
- * for (mostly) manipulation of the SerDes blocks within the IBA7220.
- * the functions declared should only be called from within other
- * 7220-related files such as ipath_iba7220.c or ipath_sd7220.c.
- */
-int ipath_sd7220_presets(struct ipath_devdata *dd);
-int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset);
-int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, u8 *img,
-	int len, int offset);
-int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, const u8 *img,
-	int len, int offset);
-/*
- * Below used for sdnum parameter, selecting one of the two sections
- * used for PCIe, or the single SerDes used for IB, which is the
- * only one currently used
- */
-#define IB_7220_SERDES 2
-
-int ipath_sd7220_ib_load(struct ipath_devdata *dd);
-int ipath_sd7220_ib_vfy(struct ipath_devdata *dd);
-
-#endif /* _IPATH_7220_H */

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -132,18 +132,13 @@ static int __devinit ipath_init_one(struct pci_dev *,
 
 /* Only needed for registration, nothing else needs this info */
 #define PCI_VENDOR_ID_PATHSCALE 0x1fc1
-#define PCI_VENDOR_ID_QLOGIC 0x1077
 #define PCI_DEVICE_ID_INFINIPATH_HT 0xd
-#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
-#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220
 
 /* Number of seconds before our card status check...  */
 #define STATUS_TIMEOUT 60
 
 static const struct pci_device_id ipath_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) },
 	{ 0, }
 };
 
@@ -521,30 +516,9 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	/* setup the chip-specific functions, as early as possible. */
 	switch (ent->device) {
 	case PCI_DEVICE_ID_INFINIPATH_HT:
-#ifdef CONFIG_HT_IRQ
 		ipath_init_iba6110_funcs(dd);
 		break;
-#else
-		ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if "
-			      "CONFIG_HT_IRQ is not enabled\n", ent->device);
-		return -ENODEV;
-#endif
-	case PCI_DEVICE_ID_INFINIPATH_PE800:
-#ifdef CONFIG_PCI_MSI
-		ipath_init_iba6120_funcs(dd);
-		break;
-#else
-		ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if "
-			      "CONFIG_PCI_MSI is not enabled\n", ent->device);
-		return -ENODEV;
-#endif
-	case PCI_DEVICE_ID_INFINIPATH_7220:
-#ifndef CONFIG_PCI_MSI
-		ipath_dbg("CONFIG_PCI_MSI is not enabled, "
-			  "using INTx for unit %u\n", dd->ipath_unit);
-#endif
-		ipath_init_iba7220_funcs(dd);
-		break;
+
 	default:
 		ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
 			      "failing\n", ent->device);

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -1030,8 +1030,6 @@ void ipath_free_data(struct ipath_portdata *dd);
 u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
 void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
 				unsigned len, int avail);
-void ipath_init_iba7220_funcs(struct ipath_devdata *);
-void ipath_init_iba6120_funcs(struct ipath_devdata *);
 void ipath_init_iba6110_funcs(struct ipath_devdata *);
 void ipath_get_eeprom_info(struct ipath_devdata *);
 int ipath_update_eeprom_log(struct ipath_devdata *dd);