Commit f72d6f60 authored by Helmut Klein's avatar Helmut Klein Committed by Kevin Hilman

ARM64: dts: meson-gx: use stable UART bindings with correct gate clock

This patch switches to the stable UART bindings but also add the correct
gate clock to the non-AO UART nodes for GXBB and GXL SoCs.
Acked-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarHelmut Klein <hgkr.klein@gmail.com>
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent 12ada051
......@@ -225,7 +225,7 @@ reset: reset-controller@4404 {
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
......@@ -233,7 +233,7 @@ uart_A: serial@84c0 {
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
......@@ -279,7 +279,7 @@ pwm_ef: pwm@86c0 {
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
......@@ -381,18 +381,16 @@ sec_AO: ao-secure@140 {
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart";
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
......
......@@ -682,6 +682,31 @@ &spifc {
clocks = <&clkc CLKID_SPI>;
};
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
......@@ -623,6 +623,31 @@ &spifc {
clocks = <&clkc CLKID_SPI>;
};
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_AO {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_AO_B {
clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
};
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment