staging: rtl8188eu: Fix typo in rtl8188eu/include

Correct spelling typo in rtl8188eu/include
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h

@@ -26,7 +26,7 @@
 /*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /*  3. RF register 0x00-2E */
 /*  4. Bit Mask for BB/RF register */
-/*  5. Other defintion for BB/RF R/W */
+/*  5. Other definition for BB/RF R/W */
 /*  */
 
 

drivers/staging/rtl8188eu/include/odm_debug.h

@@ -27,7 +27,7 @@
 /*	Define the debug levels */
 /*  */
 /*	1. DBG_TRACE and DBG_LOUD are used for normal cases. */
-/*	They can help SW engineer to develope or trace states changed */
+/*	They can help SW engineer to develop or trace states changed */
 /*	and also help HW enginner to trace every operation to and from HW, */
 /*	e.g IO, Tx, Rx. */
 /*  */

drivers/staging/rtl8188eu/include/rtw_cmd.h

@@ -745,7 +745,7 @@ struct TDLSoption_param
 
 Result:
 0x00: success
-0x01: sucess, and check Response.
+0x01: success, and check Response.
 0x02: cmd ignored due to duplicated sequcne number
 0x03: cmd dropped due to invalid cmd code
 0x04: reserved.

drivers/staging/rtl8188eu/include/rtw_led.h

@@ -163,14 +163,14 @@ enum LED_STRATEGY_871x {
 void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
 
 struct led_priv{
-	/* add for led controll */
+	/* add for led control */
 	struct LED_871x			SwLed0;
 	struct LED_871x			SwLed1;
 	enum LED_STRATEGY_871x	LedStrategy;
 	u8	bRegUseLed;
 	void (*LedControlHandler)(struct adapter *padapter,
 				  enum LED_CTL_MODE LedAction);
-	/* add for led controll */
+	/* add for led control */
 };
 
 #define rtw_led_control(adapt, action) \

drivers/staging/rtl8188eu/include/rtw_mlme.h

@@ -53,11 +53,11 @@
 #define	WIFI_SITE_MONITOR		0x00000800	/* to indicate the station is under site surveying */
 
 #define	WIFI_MP_STATE			0x00010000
-#define	WIFI_MP_CTX_BACKGROUND		0x00020000	/*  in continous tx background */
-#define	WIFI_MP_CTX_ST			0x00040000	/*  in continous tx with single-tone */
-#define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000	/*  pending in continous tx background due to out of skb */
-#define	WIFI_MP_CTX_CCK_HW		0x00100000	/*  in continous tx */
-#define	WIFI_MP_CTX_CCK_CS		0x00200000	/*  in continous tx with carrier suppression */
+#define	WIFI_MP_CTX_BACKGROUND		0x00020000	/*  in continuous tx background */
+#define	WIFI_MP_CTX_ST			0x00040000	/*  in continuous tx with single-tone */
+#define	WIFI_MP_CTX_BACKGROUND_PENDING	0x00080000	/*  pending in continuous tx background due to out of skb */
+#define	WIFI_MP_CTX_CCK_HW		0x00100000	/*  in continuous tx */
+#define	WIFI_MP_CTX_CCK_CS		0x00200000	/*  in continuous tx with carrier suppression */
 #define WIFI_MP_LPBK_STATE		0x00400000
 
 #define _FW_UNDER_LINKING	WIFI_UNDER_LINKING
@@ -239,7 +239,7 @@ struct wifidirect_info {
 	u8 profileindex; /* Used to point to the index of profileinfo array */
 	u8 peer_operating_ch;
 	u8 find_phase_state_exchange_cnt;
-	/* The device password ID for group negotation */
+	/* The device password ID for group negotiation */
 	u16 device_password_id_for_nego;
 	u8 negotiation_dialog_token;
 	/* SSID information for group negotitation */

drivers/staging/rtl8188eu/include/rtw_mlme_ext.h

@@ -107,7 +107,7 @@ extern unsigned char WMM_PARA_OUI[];
 /*  Note: */
 /*	We just add new channel plan when the new channel plan is different
  *      from any of the following channel plan. */
-/*	If you just wnat to customize the acitions(scan period or join actions)
+/*	If you just want to customize the actions(scan period or join actions)
  *      about one of the channel plan, */
 /*	customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
 enum RT_CHANNEL_DOMAIN {

drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h

@@ -56,7 +56,7 @@
 /*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /*  3. RF register 0x00-2E */
 /*  4. Bit Mask for BB/RF register */
-/*  5. Other defintion for BB/RF R/W */
+/*  5. Other definition for BB/RF R/W */
 /*  */
 
 

drivers/staging/rtl8188eu/include/rtw_rf.h

@@ -119,7 +119,7 @@ enum ht_channel_width {
 };
 
 /*  */
-/*  Represent Extention Channel Offset in HT Capabilities */
+/*  Represent Extension Channel Offset in HT Capabilities */
 /*  This is available only in 40Mhz mode. */
 /*  */
 enum ht_extchnl_offset {

drivers/staging/rtl8188eu/include/sta_info.h

@@ -338,7 +338,7 @@ struct	sta_priv {
 	 */
 	struct sta_info *sta_aid[NUM_STA];
 
-	u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap
+	u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
 			   * for sleeping sta. */
 	u16 tim_bitmap;	/* only support 15 stations, aid=0~15 mapping
 			 * bit0~bit15 */

drivers/staging/rtl8188eu/include/wifi.h

@@ -984,7 +984,7 @@ enum ht_cap_ampdu_factor {
 #define	P2P_PROVISION_TIMEOUT		5000
 /* 3 seconds timeout for sending the prov disc request concurrent mode */
 #define	P2P_CONCURRENT_PROVISION_TIME	3000
-/* 5 seconds timeout for receiving the group negotation response */
+/* 5 seconds timeout for receiving the group negotiation response */
 #define	P2P_GO_NEGO_TIMEOUT		5000
 /* 3 seconds timeout for sending the negotiation request under concurrent mode */
 #define	P2P_CONCURRENT_GO_NEGO_TIME	3000