net: dsa: felix: replace tabs with spaces

Over the time, some patches have introduced structures aligned with
spaces, near structures aligned with tabs. Fix the inconsistencies.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/ocelot/felix.c

@@ -797,7 +797,7 @@ const struct dsa_switch_ops felix_switch_ops = {
 	.cls_flower_add		= felix_cls_flower_add,
 	.cls_flower_del		= felix_cls_flower_del,
 	.cls_flower_stats	= felix_cls_flower_stats,
-	.port_setup_tc          = felix_port_setup_tc,
+	.port_setup_tc		= felix_port_setup_tc,
 };
 
 static int __init felix_init(void)

drivers/net/dsa/ocelot/felix.h

@@ -20,7 +20,7 @@ struct felix_info {
 	const struct ocelot_stat_layout	*stats_layout;
 	unsigned int			num_stats;
 	int				num_ports;
-	int                             num_tx_queues;
+	int				num_tx_queues;
 	struct vcap_field		*vcap_is2_keys;
 	struct vcap_field		*vcap_is2_actions;
 	const struct vcap_props		*vcap;

drivers/net/dsa/ocelot/felix_vsc9959.c

@@ -296,15 +296,15 @@ static const u32 vsc9959_sys_regmap[] = {
 };
 
 static const u32 vsc9959_ptp_regmap[] = {
-	REG(PTP_PIN_CFG,                   0x000000),
-	REG(PTP_PIN_TOD_SEC_MSB,           0x000004),
-	REG(PTP_PIN_TOD_SEC_LSB,           0x000008),
-	REG(PTP_PIN_TOD_NSEC,              0x00000c),
-	REG(PTP_PIN_WF_HIGH_PERIOD,        0x000014),
-	REG(PTP_PIN_WF_LOW_PERIOD,         0x000018),
-	REG(PTP_CFG_MISC,                  0x0000a0),
-	REG(PTP_CLK_CFG_ADJ_CFG,           0x0000a4),
-	REG(PTP_CLK_CFG_ADJ_FREQ,          0x0000a8),
+	REG(PTP_PIN_CFG,			0x000000),
+	REG(PTP_PIN_TOD_SEC_MSB,		0x000004),
+	REG(PTP_PIN_TOD_SEC_LSB,		0x000008),
+	REG(PTP_PIN_TOD_NSEC,			0x00000c),
+	REG(PTP_PIN_WF_HIGH_PERIOD,		0x000014),
+	REG(PTP_PIN_WF_LOW_PERIOD,		0x000018),
+	REG(PTP_CFG_MISC,			0x0000a0),
+	REG(PTP_CLK_CFG_ADJ_CFG,		0x0000a4),
+	REG(PTP_CLK_CFG_ADJ_FREQ,		0x0000a8),
 };
 
 static const u32 vsc9959_gcb_regmap[] = {
@@ -1173,8 +1173,8 @@ static const struct felix_info felix_info_vsc9959 = {
 	.mdio_bus_free		= vsc9959_mdio_bus_free,
 	.phylink_validate	= vsc9959_phylink_validate,
 	.prevalidate_phy_mode	= vsc9959_prevalidate_phy_mode,
-	.port_setup_tc          = vsc9959_port_setup_tc,
-	.port_sched_speed_set   = vsc9959_sched_speed_set,
+	.port_setup_tc		= vsc9959_port_setup_tc,
+	.port_sched_speed_set	= vsc9959_sched_speed_set,
 	.xmit_template_populate	= vsc9959_xmit_template_populate,
 };