ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-names

According to Documentation/devicetree/bindings/iio/accel/mma8452.txt,
the correct interrupt-names are "INT1" and "INT2", so fix them
accordingly.

While at it, modify the node to only specify "INT2" since providing
two interrupts is not necessary or useful (the driver will only use
one).
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[andrew.smirnov@gmail.com modified the patch to drop INT1]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi

@@ -358,8 +358,8 @@ accel@1c {
 		compatible = "fsl,mma8451";
 		reg = <0x1c>;
 		interrupt-parent = <&gpio1>;
-		interrupt-names = "int1", "int2";
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	hpa2: amp@60 {
@@ -849,7 +849,6 @@ &wdog1 {
 &iomuxc {
 	pinctrl_accel: accelgrp {
 		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x4001b000
 			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
 		>;
 	};