Merge tag 'omap-for-v3.20/dt-pt3-v2' of...

Merge tag 'omap-for-v3.20/dt-pt3-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap device tree changes for v3.20, part 3" from Tony Lindgren:

Device tree related chages for omaps to fix dm816x syscon,
fix various devices for gta04, and add USB nodes for am57xx
and dra7.

* tag 'omap-for-v3.20/dt-pt3-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: Fix dm816x pinctrl and syscon so they are children of SCM
  ARM: dts: omap3-gta04: Disable keypad
  ARM: dts: omap3-gta04: only power DSS when necessary.
  ARM: dts: omap3-gta04: add gyroscope
  ARM: dts: omap3-gta04: enable power-off for wifi card.
  ARM: dts: omap3-gta04: add comments about gpios
  ARM: dts: omap3-gta04: Add ramp value for twl4030 audio
  ARM: dts: omap3-gta04: Enable power-off using twl4030
  ARM: dts: omap3-gta04: Fix a GPIO line for bma180 node
  ARM: dts: omap3-gta04: Enable twl audio vibra support
  ARM: dts: omap3-gta04: Enable mcbps2 necessary for audio
  ARM: dts: omap3-gta04: Fix audio node malformatting
  ARM: dts: omap3-gta04: Fix backup-battery charging in devicetree file.
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -88,6 +88,20 @@ gpio_fan: gpio_fan {
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb1_pins>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb2_pins>;
+	};
 };
 
 &dra7_pmx_core {
@@ -252,6 +266,17 @@ usb1_pins: pinmux_usb1_pins {
 		>;
 	};
 
+	extcon_usb1_pins: extcon_usb1_pins {
+		pinctrl-single,pins = <
+			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+		>;
+	};
+
+	extcon_usb2_pins: extcon_usb2_pins {
+		pinctrl-single,pins = <
+			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -523,3 +548,15 @@ &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
 };
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "peripheral";
+};

arch/arm/boot/dts/dm816x.dtsi

@@ -50,15 +50,6 @@ mpu {
 		};
 	};
 
-	dm816x_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x48140800 0x50a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <16>;
-		pinctrl-single,function-mask = <0xf>;
-	};
-
 	/*
 	 * XXX: Use a flat representation of the dm816x interconnect.
 	 * The real dm816x interconnect network is quite complex. Since
@@ -89,12 +80,29 @@ prcm_clockdomains: clockdomains {
 		};
 
 		scrm: scrm@48140000 {
-			compatible = "ti,dm816-scrm";
+			compatible = "ti,dm816-scrm", "simple-bus";
 			reg = <0x48140000 0x21000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x48140000 0x21000>;
 
+			dm816x_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon@600 {
+				compatible = "syscon";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
 			scrm_clocks: clocks {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -104,11 +112,6 @@ scrm_clockdomains: clockdomains {
 			};
 		};
 
-		cm: syscon@44e10000 {
-			compatible = "ti,am33xx-controlmodule", "syscon";
-			reg = <0x44e10000 0x800>;
-		};
-
 		edma: edma@49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
@@ -213,6 +216,7 @@ eth0: ethernet@4a100000 {
 			reg = <0x4a100000 0x800
 			       0x4a100900 0x3700>;
 			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0>;
 			ti,davinci-ctrl-mod-reg-offset = <0x900>;
 			ti,davinci-ctrl-ram-offset = <0x2000>;
@@ -226,6 +230,7 @@ eth1: ethernet@4a120000 {
 			ti,hwmods = "emac1";
 			reg = <0x4a120000 0x4000>;
 			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0>;
 			ti,davinci-ctrl-mod-reg-offset = <0x900>;
 			ti,davinci-ctrl-ram-offset = <0x2000>;

arch/arm/boot/dts/dra7-evm.dts

@@ -26,6 +26,16 @@ mmc2_3v3: fixedregulator-mmc2 {
 		regulator-max-microvolt = <3300000>;
 	};
 
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -391,6 +401,19 @@ ldousb_reg: ldousb {
 			};
 		};
 	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 };
 
 &i2c2 {
@@ -520,6 +543,14 @@ partition@9 {
 	};
 };
 
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra72-evm.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI DRA722";
@@ -24,6 +25,16 @@ evm_3v3: fixedregulator-evm_3v3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dra7_pmx_core {
@@ -255,6 +266,18 @@ tps65917_power_button {
 			ti,palmas-long-press-seconds = <6>;
 		};
 	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };
 
 &uart1 {
@@ -357,6 +380,14 @@ &usb2_phy2 {
 	phy-supply = <&ldo4_reg>;
 };
 
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb1 {
 	dr_mode = "peripheral";
 	pinctrl-names = "default";

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -237,11 +237,18 @@ twl: twl@48 {
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
-	};
 
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		codec {
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			ti,enable-vibra = <1>;
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
 		};
 	};
 };
@@ -257,15 +264,23 @@ bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 	};
 
 	/* accelerometer */
 	bma180@41 {
 		compatible = "bosch,bma180";
 		reg = <0x41>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
+	};
+
+	/* gyroscope */
+	itg3200@68 {
+		compatible = "invensense,itg3200";
+		reg = <0x68>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 0>; /* GPIO_56 */
 	};
 
 	/* leds */
@@ -316,7 +331,7 @@ tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <600>;
 	};
@@ -355,12 +370,17 @@ &mmc2 {
 	vmmc-supply = <&vaux4>;
 	bus-width = <4>;
 	ti,non-removable;
+	cap-power-off-card;
 };
 
 &mmc3 {
 	status = "disabled";
 };
 
+&twl_keypad {
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
@@ -377,8 +397,8 @@ &uart3 {
 };
 
 &charger {
-	bb_uvolt = <3200000>;
-	bb_uamp = <150>;
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
 };
 
 /* spare */
@@ -412,16 +432,12 @@ &vsim {
 	regulator-max-microvolt = <3150000>;
 };
 
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
 
 	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
 
 	port {
 		dpi_out: endpoint {
@@ -498,3 +514,7 @@ filesystem@680000 {
 		};
 	};
 };
+
+&mcbsp2 {
+	status = "okay";
+};