Commit fa3e7036 authored by Andy Walls's avatar Andy Walls Committed by Mauro Carvalho Chehab

V4L/DVB (10757): cx18, v4l2-chip-ident: Finish conversion of AV decoder core to v4l2_subdev

Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast
decoder core internal to the CX23418.  Completed separation and encapsulation
of the A/V decoder core interface as a v4l2_subdevice.  The cx18 driver now
compiles and links again.
Signed-off-by: default avatarAndy Walls <awalls@radix.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 5811cf99
......@@ -201,15 +201,45 @@ static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
return 0;
}
static int cx18_av_init_hardware(struct v4l2_subdev *sd, u32 val)
static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
{
struct cx18_av_state *state = to_cx18_av_state(sd);
struct cx18 *cx = v4l2_get_subdevdata(sd);
if (!state->is_initialized) {
/* initialize on first use */
state->is_initialized = 1;
cx18_av_initialize(cx);
switch (val) {
case CX18_AV_INIT_PLLS:
/*
* The crystal freq used in calculations in this driver will be
* 28.636360 MHz.
* Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
*/
/*
* VDCLK Integer = 0x0f, Post Divider = 0x04
* AIMCLK Integer = 0x0e, Post Divider = 0x16
*/
cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
/* VDCLK Fraction = 0x2be2fe */
/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
/* AIMCLK Fraction = 0x05227ad */
/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
break;
case CX18_AV_INIT_NORMAL:
default:
if (!state->is_initialized) {
/* initialize on first use */
state->is_initialized = 1;
cx18_av_initialize(cx);
}
break;
}
return 0;
}
......@@ -1095,14 +1125,11 @@ static inline int cx18_av_dbg_match(const struct v4l2_dbg_match *match)
static int cx18_av_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *chip)
{
struct cx18_av_state *state = to_cx18_av_state(sd);
if (cx18_av_dbg_match(&chip->match)) {
/*
* Nothing else is going to claim to be this combination,
* and the real host chip revision will be returned by a host
* match on address 0.
*/
chip->ident = V4L2_IDENT_CX25843;
chip->revision = V4L2_IDENT_CX23418; /* Why not */
chip->ident = state->id;
chip->revision = state->rev;
}
return 0;
}
......@@ -1143,7 +1170,7 @@ static int cx18_av_s_register(struct v4l2_subdev *sd,
static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
.g_chip_ident = cx18_av_g_chip_ident,
.log_status = cx18_av_log_status,
.init = cx18_av_init_hardware,
.init = cx18_av_init,
.reset = cx18_av_reset,
.queryctrl = cx18_av_queryctrl,
.g_ctrl = cx18_av_g_ctrl,
......@@ -1182,19 +1209,31 @@ static const struct v4l2_subdev_ops cx18_av_ops = {
.video = &cx18_av_video_ops,
};
int cx18_av_init(struct cx18 *cx)
int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd)
{
struct v4l2_subdev *sd = &cx->av_state.sd;
v4l2_subdev_init(sd, &cx18_av_ops);
v4l2_set_subdevdata(sd, cx);
snprintf(sd->name, sizeof(sd->name),
"%s-internal A/V decoder", cx->v4l2_dev.name);
sd->grp_id = CX18_HW_CX23418;
return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
struct cx18_av_state *state = &cx->av_state;
state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO)
? V4L2_IDENT_CX23418_843 : V4L2_IDENT_UNKNOWN;
state->vid_input = CX18_AV_COMPOSITE7;
state->aud_input = CX18_AV_AUDIO8;
state->audclk_freq = 48000;
state->audmode = V4L2_TUNER_MODE_LANG1;
state->slicer_line_delay = 0;
state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
*sd = &state->sd;
v4l2_subdev_init(*sd, &cx18_av_ops);
v4l2_set_subdevdata(*sd, cx);
snprintf((*sd)->name, sizeof((*sd)->name),
"%s internal A/V decoder", cx->v4l2_dev.name);
(*sd)->grp_id = CX18_HW_CX23418;
return v4l2_device_register_subdev(&cx->v4l2_dev, *sd);
}
void cx18_av_fini(struct cx18 *cx)
void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd)
{
v4l2_device_unregister_subdev(&cx->av_state.sd);
}
......@@ -323,6 +323,11 @@ static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd)
return container_of(sd, struct cx18_av_state, sd);
}
enum cx18_av_subdev_init_arg {
CX18_AV_INIT_NORMAL = 0,
CX18_AV_INIT_PLLS = 1,
};
/* ----------------------------------------------------------------------- */
/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
......@@ -337,9 +342,8 @@ int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
void cx18_av_std_setup(struct cx18 *cx);
int cx18_av_cmd(struct cx18 *cx, int cmd, void *arg); /* FIXME - Remove */
int cx18_av_init(struct cx18 *cx);
void cx18_av_fini(struct cx18 *cx);
int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd);
void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd);
/* ----------------------------------------------------------------------- */
/* cx18_av-firmware.c */
......
......@@ -67,7 +67,7 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl)
case V4L2_CID_HUE:
case V4L2_CID_SATURATION:
case V4L2_CID_CONTRAST:
if (cx18_av_cmd(cx, VIDIOC_QUERYCTRL, qctrl))
if (v4l2_subdev_call(cx->sd_av, core, queryctrl, qctrl))
qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
return 0;
......@@ -126,7 +126,7 @@ static int cx18_s_ctrl(struct cx18 *cx, struct v4l2_control *vctrl)
case V4L2_CID_HUE:
case V4L2_CID_SATURATION:
case V4L2_CID_CONTRAST:
return cx18_av_cmd(cx, VIDIOC_S_CTRL, vctrl);
return v4l2_subdev_call(cx->sd_av, core, s_ctrl, vctrl);
case V4L2_CID_AUDIO_VOLUME:
case V4L2_CID_AUDIO_MUTE:
......@@ -151,7 +151,7 @@ static int cx18_g_ctrl(struct cx18 *cx, struct v4l2_control *vctrl)
case V4L2_CID_HUE:
case V4L2_CID_SATURATION:
case V4L2_CID_CONTRAST:
return cx18_av_cmd(cx, VIDIOC_G_CTRL, vctrl);
return v4l2_subdev_call(cx->sd_av, core, g_ctrl, vctrl);
case V4L2_CID_AUDIO_VOLUME:
case V4L2_CID_AUDIO_MUTE:
......@@ -278,7 +278,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
fmt.fmt.pix.width = cx->params.width
/ (is_mpeg1 ? 2 : 1);
fmt.fmt.pix.height = cx->params.height;
cx18_av_cmd(cx, VIDIOC_S_FMT, &fmt);
v4l2_subdev_call(cx->sd_av, video, s_fmt, &fmt);
}
priv.cx = cx;
priv.s = &cx->streams[id->type];
......
......@@ -621,13 +621,6 @@ static void __devinit cx18_init_struct2(struct cx18 *cx)
i = 0;
cx->active_input = i;
cx->audio_input = cx->card->video_inputs[i].audio_index;
cx->av_state.vid_input = CX18_AV_COMPOSITE7;
cx->av_state.aud_input = CX18_AV_AUDIO8;
cx->av_state.audclk_freq = 48000;
cx->av_state.audmode = V4L2_TUNER_MODE_LANG1;
cx->av_state.slicer_line_delay = 0;
cx->av_state.slicer_line_offset =
(10 + cx->av_state.slicer_line_delay - 2);
}
static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
......@@ -812,6 +805,14 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
cx18_gpio_init(cx);
retval = cx18_av_probe(cx, &cx->sd_av);
if (retval) {
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
/* Initialize the A/V decoder PLLs to sane defaults */
v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_PLLS);
/* active i2c */
CX18_DEBUG_INFO("activating i2c...\n");
retval = init_cx18_i2c(cx);
......@@ -1020,6 +1021,9 @@ int cx18_init_on_first_open(struct cx18 *cx)
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
/* Init the A/V decoder, if it hasn't been already */
v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_NORMAL);
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400; /* the tuner 'baseline' frequency */
......
......@@ -448,6 +448,7 @@ struct cx18 {
int instance;
struct pci_dev *pci_dev;
struct v4l2_device v4l2_dev;
struct v4l2_subdev *sd_av;
const struct cx18_card *card; /* card information */
const char *card_name; /* full name of the card */
......
......@@ -26,7 +26,6 @@
#include "cx18-irq.h"
#include "cx18-firmware.h"
#include "cx18-cards.h"
#include "cx18-av-core.h"
#include <linux/firmware.h>
#define CX18_PROC_SOFT_RESET 0xc70010
......@@ -286,23 +285,6 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
cx18_write_reg(cx, 0x2BE2FE, CX18_MPEG_CLOCK_PLL_FRAC);
cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST);
/*
* VDCLK Integer = 0x0f, Post Divider = 0x04
* AIMCLK Integer = 0x0e, Post Divider = 0x16
*/
cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
/* VDCLK Fraction = 0x2be2fe */
/* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
/* AIMCLK Fraction = 0x05227ad */
/* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz before post-divide */
cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
/* Defaults */
/* APU = SC or SC/2 = 125/62.5 */
/* EPU = SC = 125 */
......
......@@ -304,7 +304,7 @@ int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg)
return cx18_gpio(cx, cmd, arg);
if (hw == CX18_HW_CX23418)
return cx18_av_cmd(cx, cmd, arg);
return v4l2_subdev_command(cx->sd_av, cmd, arg);
addr = cx18_i2c_hw_addr(cx, hw);
if (addr < 0) {
......@@ -322,7 +322,7 @@ void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg)
CX18_ERR("adapter is not set\n");
return;
}
cx18_av_cmd(cx, cmd, arg);
v4l2_subdev_command(cx->sd_av, cmd, arg);
i2c_clients_command(&cx->i2c_adap[0], cmd, arg);
i2c_clients_command(&cx->i2c_adap[1], cmd, arg);
if (cx->hw_flags & CX18_HW_GPIO)
......
......@@ -208,7 +208,7 @@ static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh,
* digitizer/slicer. Note, cx18_av_vbi() wipes the passed in
* fmt->fmt.sliced under valid calling conditions
*/
if (cx18_av_cmd(cx, VIDIOC_G_FMT, fmt))
if (v4l2_subdev_call(cx->sd_av, video, g_fmt, fmt))
return -EINVAL;
/* Ensure V4L2 spec compliant output */
......@@ -295,7 +295,7 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh,
cx->params.width = w;
cx->params.height = h;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
return cx18_g_fmt_vid_cap(file, fh, fmt);
}
......@@ -322,7 +322,7 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
* Note cx18_av_vbi_wipes out alot of the passed in fmt under valid
* calling conditions
*/
ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
if (ret)
return ret;
......@@ -359,7 +359,7 @@ static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh,
* Note, cx18_av_vbi() wipes some "impossible" service lines in the
* passed in fmt->fmt.sliced under valid calling conditions
*/
ret = cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
ret = v4l2_subdev_call(cx->sd_av, video, s_fmt, fmt);
if (ret)
return ret;
/* Store our current v4l2 sliced VBI settings */
......@@ -516,7 +516,8 @@ static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop)
if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
return cx18_av_cmd(cx, VIDIOC_S_CROP, crop);
CX18_DEBUG_WARN("VIDIOC_S_CROP not implemented\n");
return -EINVAL;
}
static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop)
......@@ -525,7 +526,8 @@ static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop)
if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
return cx18_av_cmd(cx, VIDIOC_G_CROP, crop);
CX18_DEBUG_WARN("VIDIOC_G_CROP not implemented\n");
return -EINVAL;
}
static int cx18_enum_fmt_vid_cap(struct file *file, void *fh,
......
......@@ -348,7 +348,7 @@ static void cx18_vbi_setup(struct cx18_stream *s)
}
/* setup VBI registers */
cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in);
v4l2_subdev_call(cx->sd_av, video, s_fmt, &cx->vbi.in);
/*
* Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw
......
......@@ -154,7 +154,7 @@ static u32 compress_sliced_buf(struct cx18 *cx, u32 line, u8 *buf,
if (p[0] != 0xff || p[1] || p[2] || p[3] != eav)
continue;
vbi.p = p + 4;
cx18_av_cmd(cx, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
v4l2_subdev_call(cx->sd_av, video, decode_vbi_line, &vbi);
if (vbi.type) {
cx->vbi.sliced_data[line].id = vbi.type;
cx->vbi.sliced_data[line].field = vbi.is_second_field;
......
......@@ -32,7 +32,7 @@ void cx18_video_set_io(struct cx18 *cx)
route.input = cx->card->video_inputs[inp].video_input;
route.output = 0;
cx18_av_cmd(cx, VIDIOC_INT_S_VIDEO_ROUTING, &route);
v4l2_subdev_call(cx->sd_av, video, s_routing, &route);
type = cx->card->video_inputs[inp].video_type;
......
......@@ -64,7 +64,8 @@ enum {
/* module saa7146: reserved range 300-309 */
V4L2_IDENT_SAA7146 = 300,
/* Conexant MPEG encoder/decoders: reserved range 410-420 */
/* Conexant MPEG encoder/decoders: reserved range 400-420 */
V4L2_IDENT_CX23418_843 = 403, /* Integrated A/V Decoder on the '418 */
V4L2_IDENT_CX23415 = 415,
V4L2_IDENT_CX23416 = 416,
V4L2_IDENT_CX23418 = 418,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment