EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call

Reserve ECC Double Bit Error SMC call to alert U-Boot that a DBE has
occurred. Move the call from local EDAC header file to a common header.

 [ bp: Merge the two patches. ]
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Alan Tull <atull@kernel.org> # firmware
Cc: Greg KH <greg@kroah.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@kernel.org
Link: https://lkml.kernel.org/r/1553870639-23895-1-git-send-email-thor.thayer@linux.intel.comSigned-off-by: Borislav Petkov <bp@suse.de>

drivers/edac/altera_edac.c

@@ -9,6 +9,7 @@
 #include <linux/ctype.h>
 #include <linux/delay.h>
 #include <linux/edac.h>
+#include <linux/firmware/intel/stratix10-smc.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
 #include <linux/irqchip/chained_irq.h>

drivers/edac/altera_edac.h

@@ -372,87 +372,4 @@ struct altr_arria10_edac {
 	struct notifier_block	panic_notifier;
 };
 
-/*
- * Functions specified by ARM SMC Calling convention:
- *
- * FAST call executes atomic operations, returns when the requested operation
- * has completed.
- * STD call starts a operation which can be preempted by a non-secure
- * interrupt. The call can return before the requested operation has
- * completed.
- *
- * a0..a7 is used as register names in the descriptions below, on arm32
- * that translates to r0..r7 and on arm64 to w0..w7.
- */
-
-#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
-	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
-	ARM_SMCCC_OWNER_SIP, (func_num))
-
-#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
-	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
-	ARM_SMCCC_OWNER_SIP, (func_num))
-
-#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
-#define INTEL_SIP_SMC_STATUS_OK				0x0
-#define INTEL_SIP_SMC_REG_ERROR				0x5
-
-/*
- * Request INTEL_SIP_SMC_REG_READ
- *
- * Read a protected register using SMCCC
- *
- * Call register usage:
- * a0: INTEL_SIP_SMC_REG_READ.
- * a1: register address.
- * a2-7: not used.
- *
- * Return status:
- * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
- *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
- * a1: Value in the register
- * a2-3: not used.
- */
-#define INTEL_SIP_SMC_FUNCID_REG_READ 7
-#define INTEL_SIP_SMC_REG_READ \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
-
-/*
- * Request INTEL_SIP_SMC_REG_WRITE
- *
- * Write a protected register using SMCCC
- *
- * Call register usage:
- * a0: INTEL_SIP_SMC_REG_WRITE.
- * a1: register address
- * a2: value to program into register.
- * a3-7: not used.
- *
- * Return status:
- * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
- *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
- * a1-3: not used.
- */
-#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
-#define INTEL_SIP_SMC_REG_WRITE \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
-
-/*
- * Request INTEL_SIP_SMC_ECC_DBE
- *
- * Sync call used by service driver at EL1 alert EL3 that a Double Bit
- * ECC error has occurred.
- *
- * Call register usage:
- * a0 INTEL_SIP_SMC_ECC_DBE
- * a1 SysManager Double Bit Error value
- * a2-7 not used
- *
- * Return status
- * a0 INTEL_SIP_SMC_STATUS_OK
- */
-#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
-#define INTEL_SIP_SMC_ECC_DBE \
-	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
-
 #endif	/* #ifndef _ALTERA_EDAC_H */

include/linux/firmware/intel/stratix10-smc.h

@@ -309,4 +309,23 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
 #define INTEL_SIP_SMC_RSU_UPDATE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
+
+/*
+ * Request INTEL_SIP_SMC_ECC_DBE
+ *
+ * Sync call used by service driver at EL1 to alert EL3 that a Double
+ * Bit ECC error has occurred.
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_ECC_DBE
+ * a1 SysManager Double Bit Error value
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
+#define INTEL_SIP_SMC_ECC_DBE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
+
 #endif