Commit faf57162 authored by Inaky Perez-Gonzalez's avatar Inaky Perez-Gonzalez

wimax/i2400m: handle USB stalls

When the device stalls, clear it and retry; if it keeps failing too
often, reset the device.

This specially happens when running on virtual machines; the real
hardware doesn't seem to trip on stalls too much, except for a few
reports in the mailing list (still to be confirmed this is the cause,
although it seems likely.

NOTE: it is not clear if the URB has to be resubmitted fully or start
only at the offset of the first transaction sent. Can't find
documentation to clarify one end or the other.

Tests that just resubmit the whole URB seemed to work in my
environment.
Signed-off-by: default avatarInaky Perez-Gonzalez <inaky@linux.intel.com>
parent fae92216
......@@ -113,6 +113,28 @@ ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size)
}
result = len;
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "BM-CMD: too many stalls in "
"URB; resetting device\n");
usb_queue_reset_device(i2400mu->usb_iface);
/* fallthrough */
} else {
usb_clear_halt(i2400mu->usb_dev, pipe);
msleep(10); /* give the device some time */
goto retry;
}
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
......
......@@ -222,6 +222,26 @@ struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
goto retry; /* ZLP, just resubmit */
skb_put(rx_skb, read_size);
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "BM-CMD: too many stalls in "
"URB; resetting device\n");
goto do_reset;
}
usb_clear_halt(i2400mu->usb_dev, usb_pipe);
msleep(10); /* give the device some time */
goto retry;
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
......@@ -283,6 +303,7 @@ struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
error_reset:
dev_err(dev, "RX: maximum errors in URB exceeded; "
"resetting device\n");
do_reset:
usb_queue_reset_device(i2400mu->usb_iface);
rx_skb = ERR_PTR(result);
goto out;
......
......@@ -115,6 +115,28 @@ int i2400mu_tx(struct i2400mu *i2400mu, struct i2400m_msg_hdr *tx_msg,
result = -EIO;
}
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "BM-CMD: too many stalls in "
"URB; resetting device\n");
usb_queue_reset_device(i2400mu->usb_iface);
/* fallthrough */
} else {
usb_clear_halt(i2400mu->usb_dev, usb_pipe);
msleep(10); /* give the device some time */
goto retry;
}
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
......
......@@ -172,14 +172,59 @@ int __i2400mu_send_barker(struct i2400mu *i2400mu,
epd = usb_get_epd(i2400mu->usb_iface, endpoint);
pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
memcpy(buffer, barker, barker_size);
retry:
ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size,
&actual_len, 200);
if (ret < 0) {
if (ret != -EINVAL)
dev_err(dev, "E: barker error: %d\n", ret);
} else if (actual_len != barker_size) {
dev_err(dev, "E: only %d bytes transmitted\n", actual_len);
ret = -EIO;
switch (ret) {
case 0:
if (actual_len != barker_size) { /* Too short? drop it */
dev_err(dev, "E: %s: short write (%d B vs %zu "
"expected)\n",
__func__, actual_len, barker_size);
ret = -EIO;
}
break;
case -EPIPE:
/*
* Stall -- maybe the device is choking with our
* requests. Clear it and give it some time. If they
* happen to often, it might be another symptom, so we
* reset.
*
* No error handling for usb_clear_halt(0; if it
* works, the retry works; if it fails, this switch
* does the error handling for us.
*/
if (edc_inc(&i2400mu->urb_edc,
10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "E: %s: too many stalls in "
"URB; resetting device\n", __func__);
usb_queue_reset_device(i2400mu->usb_iface);
/* fallthrough */
} else {
usb_clear_halt(i2400mu->usb_dev, pipe);
msleep(10); /* give the device some time */
goto retry;
}
case -EINVAL: /* while removing driver */
case -ENODEV: /* dev disconnect ... */
case -ENOENT: /* just ignore it */
case -ESHUTDOWN: /* and exit */
case -ECONNRESET:
ret = -ESHUTDOWN;
break;
default: /* Some error? */
if (edc_inc(&i2400mu->urb_edc,
EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
dev_err(dev, "E: %s: maximum errors in URB "
"exceeded; resetting device\n",
__func__);
usb_queue_reset_device(i2400mu->usb_iface);
} else {
dev_warn(dev, "W: %s: cannot send URB: %d\n",
__func__, ret);
goto retry;
}
}
kfree(buffer);
error_kzalloc:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment