Commit faf7b0b0 authored by Kai Germaschewski's avatar Kai Germaschewski

Merge http://linus.bkbits.net/linux-2.5

into hostme.bitkeeper.com:/ua/repos/l/linux-isdn/linux-2.5.make
parents bbe302ee 4fd5bb5d
......@@ -2,30 +2,6 @@
# This file contains rules which are shared between multiple Makefiles.
#
#
# Special variables which should not be exported
#
unexport EXTRA_AFLAGS
unexport EXTRA_CFLAGS
unexport EXTRA_LDFLAGS
unexport EXTRA_ARFLAGS
unexport SUBDIRS
unexport SUB_DIRS
unexport ALL_SUB_DIRS
unexport MOD_SUB_DIRS
unexport O_TARGET
unexport obj-y
unexport obj-m
unexport obj-n
unexport obj-
unexport export-objs
unexport subdir-y
unexport subdir-m
unexport subdir-n
unexport subdir-
unexport mod-subdirs
# Some standard vars
comma := ,
......@@ -76,7 +52,7 @@ obj-m := $(filter-out %/, $(obj-m))
# add it to $(subdir-m)
both-m := $(filter $(mod-subdirs), $(subdir-y))
SUB_DIRS := $(subdir-y)
SUB_DIRS := $(subdir-y) $(if $(BUILD_MODULES),$(subdir-m))
MOD_SUB_DIRS := $(sort $(subdir-m) $(both-m))
ALL_SUB_DIRS := $(sort $(subdir-y) $(subdir-m) $(subdir-n) $(subdir-))
......@@ -107,14 +83,14 @@ multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)))
subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)))
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m))) $(EXTRA_TARGETS)
real-objs-m := $(foreach m, $(obj-m), $(if $($(m:.o=-objs)),$($(m:.o=-objs)),$(m)))
# ==========================================================================
#
# Get things started.
#
first_rule: all_targets
first_rule: vmlinux $(if $(BUILD_MODULES),$(obj-m))
#
# Common rules
......@@ -197,7 +173,7 @@ endif
# Build the compiled-in targets
# ---------------------------------------------------------------------------
all_targets: $(O_TARGET) $(L_TARGET) sub_dirs
vmlinux: $(O_TARGET) $(L_TARGET) $(EXTRA_TARGETS) sub_dirs
# To build objects in subdirs, we need to descend into the directories
$(sort $(subdir-obj-y)): sub_dirs ;
......@@ -282,8 +258,7 @@ $(patsubst %,_modinst_%,$(MOD_SUB_DIRS)) : FORCE
endif
.PHONY: modules
modules: $(obj-m) FORCE \
$(patsubst %,_modsubdir_%,$(MOD_SUB_DIRS))
modules: $(obj-m) FORCE $(patsubst %,_modsubdir_%,$(MOD_SUB_DIRS))
.PHONY: _modinst__
_modinst__: FORCE
......@@ -293,8 +268,7 @@ ifneq "$(strip $(obj-m))" ""
endif
.PHONY: modules_install
modules_install: _modinst__ \
$(patsubst %,_modinst_%,$(MOD_SUB_DIRS))
modules_install: _modinst__ $(patsubst %,_modinst_%,$(MOD_SUB_DIRS))
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o
EXTRA_AFLAGS := $(CFLAGS)
EXTRA_AFLAGS := $(CFLAGS)
export-objs := alpha_ksyms.o
......@@ -97,7 +93,7 @@ endif
endif # GENERIC
all: kernel.o head.o
include $(TOPDIR)/Rules.make
ASM_OFFSETS_H = $(TOPDIR)/include/asm-alpha/asm_offsets.h
asm_offsets:
......@@ -112,4 +108,3 @@ asm_offsets:
clean::
rm -f check_asm
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
O_TARGET := kernel.o
ENTRY_OBJ = entry-$(PROCESSOR).o
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
O_TARGET := kernel.o
# Object file lists.
obj-y := arch.o compat.o dma.o $(ENTRY_OBJ) entry-common.o irq.o \
......@@ -43,7 +40,7 @@ head-y := head.o
obj-$(CONFIG_DEBUG_LL) += debug.o
endif
all: kernel.o $(head-y) init_task.o
EXTRA_TARGETS := $(head-y) init_task.o
include $(TOPDIR)/Rules.make
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
O_TARGET := arc.o
......@@ -19,8 +16,8 @@ export-objs := oldlatches.o
obj-$(CONFIG_DEBUG_LL) += debug.o
all: arc.o head.o
EXTRA_TARGETS := head.o
include $(TOPDIR)/Rules.make
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR)
include $(TOPDIR)/Rules.make
......@@ -2,15 +2,9 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o
export-objs := ksyms.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
all: kernel.o head.o init_task.o
EXTRA_TARGETS := head.o init_task.o
O_TARGET := kernel.o
......@@ -36,4 +29,6 @@ obj-y += setup-visws.o
obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
endif
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
......@@ -5,13 +5,9 @@
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
#
all: dig.a
O_TARGET := dig.a
obj-y := setup.o
obj-$(CONFIG_IA64_GENERIC) += machvec.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,13 +2,9 @@
# Makefile for the ia32 kernel emulation subsystem.
#
all: ia32.o
O_TARGET := ia32.o
obj-y := ia32_entry.o sys_ia32.o ia32_ioctl.o ia32_signal.o ia32_support.o ia32_traps.o \
binfmt_elf32.o ia32_ldt.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,9 +2,8 @@
# Makefile for the linux kernel.
#
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := ia64_ksyms.o
......
......@@ -32,14 +32,10 @@
# http://oss.sgi.com/projects/GenInfo/NoticeExplan
#
EXTRA_CFLAGS := -DLITTLE_ENDIAN
O_TARGET := sn1.a
all: sn1.a
obj-y := cache.o error.o iomv.o synergy.o sn1_smp.o
O_TARGET = sn1.a
obj-y = cache.o error.o iomv.o synergy.o sn1_smp.o
clean::
EXTRA_CFLAGS := -DLITTLE_ENDIAN
include $(TOPDIR)/Rules.make
......@@ -32,14 +32,11 @@
# http://oss.sgi.com/projects/GenInfo/NoticeExplan
#
EXTRA_CFLAGS := -DLITTLE_ENDIAN
all: sn2.a
O_TARGET = sn2.a
O_TARGET := sn2.a
obj-y = cache.o iomv.o sn2_smp.o
obj-y := cache.o iomv.o sn2_smp.o
clean::
EXTRA_CFLAGS := -DLITTLE_ENDIAN
include $(TOPDIR)/Rules.make
#
# Makefile for Linux arch/m68k/fpsp040 source directory
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
OS_TARGET := fpsp.o
O_TARGET := fpsp.o
OS_OBJS := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
obj-y := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
kernel_ex.o res_func.o round.o sacos.o sasin.o satan.o satanh.o \
scosh.o setox.o sgetem.o sint.o slog2.o slogn.o \
smovecr.o srem_mod.o scale.o \
......@@ -19,11 +12,9 @@ OS_OBJS := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
all: $(OS_TARGET)
EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
include $(TOPDIR)/Rules.make
$(OS_OBJS): fpsp.h
$(OS_TARGET): $(OS_OBJS) fpsp.h
$(LD) -x -r -o $(OS_TARGET) $(OS_OBJS)
......@@ -4,17 +4,11 @@
# License. See the file "README.legal" in the main directory of this archive
# for more details.
EXTRA_AFLAGS := -traditional
OS_TARGET := ifpsp.o
O_TARGET := ifpsp.o
OS_OBJS := fskeleton.o iskeleton.o os.o
obj-y := fskeleton.o iskeleton.o os.o
all: $(OS_TARGET)
EXTRA_AFLAGS := -traditional
EXTRA_LDFLAGS := -x
include $(TOPDIR)/Rules.make
$(OS_OBJS):
$(OS_TARGET): $(OS_OBJS)
$(LD) -x -r -o $(OS_TARGET) $(OS_OBJS)
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := -traditional
O_TARGET := kernel.o
ifndef CONFIG_SUN3
all: head.o kernel.o
EXTRA_TARGETS := head.o
else
all: sun3-head.o kernel.o
EXTRA_TARGETS := sun3-head.o
endif
O_TARGET := kernel.o
export-objs := setup.o m68k_ksyms.o
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \
......@@ -24,6 +17,10 @@ obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o \
obj-$(CONFIG_PCI) += bios32.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
head.o: head.S m68k_defs.h
entry.o: entry.S m68k_defs.h
......@@ -39,4 +36,3 @@ m68k_defs.h: m68k_defs.c m68k_defs.head
rm m68k_defs.s
-include m68k_defs.d
include $(TOPDIR)/Rules.make
......@@ -5,14 +5,6 @@
#
# Makefile for the Alchemy Au1000 CPU, generic files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: au1000.o
O_TARGET := au1000.o
......@@ -22,7 +14,9 @@ obj-$(CONFIG_AU1000_UART) += serial.o
obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
obj-$(CONFIG_BLK_DEV_INITRD) += ramdisk.o
ramdisk.o:
mkramobj ramdisk ramdisk.o
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
ramdisk.o:
mkramobj ramdisk ramdisk.o
......@@ -5,12 +5,6 @@
#
# Makefile for the Alchemy Semiconductor PB1000 board.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: pb1000.o
O_TARGET := pb1000.o
......
......@@ -2,13 +2,6 @@
# Makefile for the Baget specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: baget.a
O_TARGET := baget.a
......@@ -18,10 +11,11 @@ obj-y := baget.o print.o setup.o time.o irq.o bagetIRQ.o \
obj-$(CONFIG_SERIAL) += vacserial.o
obj-$(CONFIG_VAC_RTC) += vacrtc.o
include $(TOPDIR)/Rules.make
bagetIRQ.o : bagetIRQ.S
$(CC) $(CFLAGS) -c -o $@ $<
##################### Baget Loader stuff ########################
image: ../../../vmlinux
......@@ -61,4 +55,3 @@ balo: balo.o dummy.o balo_supp.o print.o
clean:
rm -f balo balo.h dummy.c image image.bin
include $(TOPDIR)/Rules.make
#
# Makefile for the DECstation family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := dec.o
all: dec.o
export-objs := wbflush.o
obj-y := int-handler.o setup.o irq.o time.o reset.o rtc-dec.o wbflush.o
obj-$(CONFIG_PROM_CONSOLE) += promcon.o
int-handler.o: int-handler.S
include $(TOPDIR)/Rules.make
#
# Makefile for the DECstation family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
netboot: all
mipsel-linux-ld -N -G 0 -T ld.ecoff ../../boot/zImage \
dec_boot.o ramdisk.img -o nbImage
all: dec_boot.o
O_TARGET := dec_boot.o
obj-y := decstation.o
......
......@@ -2,25 +2,14 @@
# Makefile for the DECstation prom monitor library routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
OBJS = init.o memory.o cmdline.o identify.o locore.o
L_TARGET := rexlib.a
all: rexlib.a
obj-y := init.o memory.o cmdline.o identify.o locore.o
rexlib.a: $(OBJS)
$(AR) rcs rexlib.a $(OBJS)
sync
EXTRA_AFLAGS := $(CFLAGS)
locore.o: locore.S
include $(TOPDIR)/Rules.make
dep:
$(CPP) $(CPPFLAGS) -M *.c > .depend
include $(TOPDIR)/Rules.make
......@@ -5,14 +5,6 @@
#
# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: it8172.o
O_TARGET := it8172.o
......@@ -30,4 +22,6 @@ ifdef CONFIG_REMOTE_DEBUG
obj-y += dbg_io.o
endif
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -6,18 +6,12 @@
# Makefile for the Globespan IVR board,
# board-specific files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: ivr.o
O_TARGET := ivr.o
obj-y := init.o
obj-CONFIG_PCI += pci_fixup.o
obj-CONFIG_BLK_DEV_INITRD += le_ramdisk.o
obj-$(CONFIG_PCI) += pci_fixup.o
obj-$(CONFIG_BLK_DEV_INITRD) += le_ramdisk.o
include $(TOPDIR)/Rules.make
......@@ -6,27 +6,14 @@
# Makefile for the ITE 8172 (qed-4n-s01b) board, board
# specific files.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: ite.o
O_TARGET := ite.o
obj-y := init.o
obj-$(CONFIG_PCI) += pci_fixup.o
obj-$(CONFIG_BLK_DEV_INITRD) += le_ramdisk.o
ifdef CONFIG_PCI
obj-y += pci_fixup.o
endif
ifdef CONFIG_BLK_DEV_INITRD
obj-y += le_ramdisk.o
endif
include $(TOPDIR)/Rules.make
dep:
$(CPP) -M *.c > .depend
include $(TOPDIR)/Rules.make
#
# Makefile for the Jazz family specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: jazz.o
O_TARGET := jazz.o
obj-y := int-handler.o irq.o jazzdma.o reset.o rtc-jazz.o setup.o \
floppy-jazz.o kbd-jazz.o
int-handler.o: int-handler.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/MIPS kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# EXTRA_AFLAGS = -mips3 -mcpu=r4000 # not used?
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
obj-y += branch.o process.o signal.o entry.o \
traps.o ptrace.o vm86.o ioport.o reset.o \
......@@ -54,7 +49,4 @@ obj-$(CONFIG_NEW_PCI) += pci.o
obj-$(CONFIG_PCI_AUTO) += pci_auto.o
endif
entry.o: entry.S
head.o: head.S
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Atlas specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: atlas.o
O_TARGET := atlas.o
......
#
# Makefile for the Philips Nino specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
O_TARGET := nino.o
all: nino.o
obj-y := int-handler.o setup.o irq.o time.o reset.o rtc.o prom.o power.o
int-handler.o: int-handler.S
obj-$(CONFIG_REMOTE_DEBUG) += kgdb.o
obj-$(CONFIG_BLK_DEV_INITRD) += ramdisk.o
include $(TOPDIR)/Rules.make
ramdisk.o:
$(MAKE) -C ramdisk
mv ramdisk/ramdisk.o ramdisk.o
......@@ -25,4 +19,3 @@ ramdisk.o:
clean:
rm -f *.o
include $(TOPDIR)/Rules.make
......@@ -2,21 +2,12 @@
# Makefile for the SGI specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
O_TARGET := ip22-kern.o
all: ip22-kern.o indyIRQ.o
obj-y += indy_mc.o indy_sc.o indy_hpc.o indy_int.o indy_rtc.o system.o \
indyIRQ.o reset.o setup.o time.o
indyIRQ.o: indyIRQ.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the SNI specific part of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: sni.o int-handler.o
O_TARGET := sni.o
obj-y := int-handler.o io.o irq.o pci.o pcimt_scache.o reset.o setup.o
int-handler.o: int-handler.S
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/MIPS kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
EXTRA_AFLAGS := $(CFLAGS)
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
O_TARGET := kernel.o
export-objs = mips64_ksyms.o
export-objs := mips64_ksyms.o
obj-y := branch.o entry.o proc.o process.o ptrace.o r4k_cache.o r4k_fpu.o \
r4k_genex.o r4k_switch.o r4k_tlb.o r4k_tlb_debug.o r4k_tlb_glue.o \
......@@ -26,5 +19,6 @@ obj-$(CONFIG_SMP) += smp.o
AFLAGS_r4k_genex.o := -P
AFLAGS_r4k_tlb_glue.o := -P
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Atlas specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: atlas.o
O_TARGET := atlas.o
......
......@@ -21,15 +21,6 @@
#
# Makefile for the MIPS boards generic routines under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
all: mipsboards.o
O_TARGET := mipsboards.o
......@@ -37,4 +28,6 @@ obj-y := mipsIRQ.o pci.o reset.o display.o init.o \
memory.o printf.o cmdline.o time.o
obj-$(CONFIG_REMOTE_DEBUG) += gdb_hook.o
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
......@@ -22,13 +22,6 @@
# Makefile for the MIPS Malta specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: malta.o
O_TARGET := malta.o
......
......@@ -2,23 +2,15 @@
# Makefile for the SGI specific kernel interface routines
# under Linux.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_AFLAGS := $(CFLAGS)
O_TARGET := ip32-kern.a
O_TARGET := ip32-kern.a
EXTRA_TARGETS := ip32-irq-glue.o
all: ip32-kern.a ip32-irq-glue.o
obj-y += ip32-irq.o ip32-rtc.o ip32-setup.o ip32-irq-glue.o \
ip32-berr.o ip32-timer.o crime.o
obj-y += ip32-irq.o ip32-rtc.o ip32-setup.o ip32-irq-glue.o \
ip32-berr.o ip32-timer.o crime.o
obj-$(CONFIG_PCI) += ip32-pci.o ip32-pci-dma.o
ifdef CONFIG_PCI
obj-y += ip32-pci.o ip32-pci-dma.o
endif
EXTRA_AFLAGS := $(CFLAGS)
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: hpux.o
O_TARGET = hpux.o
O_OBJS = entry_hpux.o gate.o wrappers.o fs.o ioctl.o sys_hpux.o
O_TARGET := hpux.o
obj-y := entry_hpux.o gate.o wrappers.o fs.o ioctl.o sys_hpux.o
.o.S: $(CC) -D__ASSEMBLY__ $(AFLAGS) -traditional -c $*.S -o $*.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o init_task.o pdc_cons.o process.o head.o
O_TARGET = kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o process.o pdc_cons.o
# Object file lists.
obj-y += cache.o setup.o traps.o time.o irq.o \
syscall.o entry.o sys_parisc.o pdc.o ptrace.o hardware.o \
inventory.o drivers.o semaphore.o pa7300lc.o pci-dma.o \
signal.o hpmc.o \
real1.o real2.o led.o parisc_ksyms.o
obj-y := cache.o setup.o traps.o time.o irq.o \
syscall.o entry.o sys_parisc.o pdc.o ptrace.o hardware.o \
inventory.o drivers.o semaphore.o pa7300lc.o pci-dma.o \
signal.o hpmc.o \
real1.o real2.o led.o parisc_ksyms.o
export-objs := parisc_ksyms.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_VT) += keyboard.o
obj-$(CONFIG_PCI_LBA) += lba_pci.o
......@@ -32,6 +26,6 @@ obj-$(CONFIG_IOMMU_SBA) += sba_iommu.o
# obj-$(CONFIG_IOMMU_CCIO) += ccio-rm-dma.o
obj-$(CONFIG_IOMMU_CCIO) += ccio-dma.o
EXTRA_AFLAGS := -traditional
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# Makefile for Linux arch/ppc/iSeries source directory
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
O_TARGET := iSeries.o
export-objs := iSeries_ksyms.o
......@@ -13,7 +8,7 @@ obj-y += LparData.o ItLpQueue.o HvLpEvent.o HvCall.o mf.o iSeries_proc.o mf_pr
obj-$(CONFIG_PCI) += XmPciLpEvent.o iSeries_FlightRecorder.o iSeries_IoMmTable.o iSeries_VpdInfo.o iSeries_fixup.o iSeries_irq.o iSeries_pci.o iSeries_pci_proc.o iSeries_reset_device.o
all: iSeries.o
include $(TOPDIR)/Rules.make
LparData.c:: ReleaseData.h
......@@ -23,4 +18,3 @@ ReleaseData.h: $(TOPDIR)/Makefile
clean:
rm -f ReleaseData.h
include $(TOPDIR)/Rules.make
......@@ -3,11 +3,6 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
ifdef CONFIG_PPC64BRIDGE
EXTRA_AFLAGS := -Wa,-mppc64bridge
......@@ -25,9 +20,8 @@ HEAD-$(CONFIG_4xx) := head_4xx.o
HEAD-$(CONFIG_8xx) := head_8xx.o
HEAD-$(CONFIG_PPC_ISERIES) := iSeries_head.o
all: $(HEAD-y) kernel.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := $(HEAD-y)
export-objs := ppc_ksyms.o time.o ppc405_dma.o
......
......@@ -3,11 +3,6 @@
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
ifdef CONFIG_PPC64BRIDGE
EXTRA_AFLAGS := -Wa,-mppc64bridge
......@@ -19,8 +14,6 @@ endif
# Extra CFLAGS so we don't have to do relative includes
CFLAGS_pmac_setup.o += -I$(TOPDIR)/arch/$(ARCH)/mm
all: platform.o
O_TARGET := platform.o
export-objs := prep_setup.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
EXTRA_CFLAGS = -mno-minimal-toc
KHEAD := head.o
all: $(KHEAD) kernel.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := $(KHEAD)
export-objs := ppc_ksyms.o setup.o
......
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_AFLAGS := -traditional
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := debug.o ebcdic.o irq.o s390_ext.o smp.o s390_ksyms.o
obj-y := entry.o bitmap.o traps.o time.o process.o irq.o \
......@@ -26,5 +18,7 @@ obj-$(CONFIG_SMP) += smp.o
#
obj-$(CONFIG_REMOTE_DEBUG) += gdb-stub.o #gdb-low.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
EXTRA_AFLAGS := -traditional
EXTRA_TARGETS := head.o init_task.o
export-objs := debug.o ebcdic.o irq.o s390_ext.o smp.o s390_ksyms.o \
exec32.o
......@@ -31,9 +23,12 @@ obj-$(CONFIG_REMOTE_DEBUG) += gdb-stub.o #gdb-low.o
obj-$(CONFIG_S390_SUPPORT) += linux32.o signal32.o ioctl32.o wrapper32.o exec32.o
obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
#
# This is just to get the dependencies...
#
binfmt_elf32.o: $(TOPDIR)/fs/binfmt_elf.c
include $(TOPDIR)/Rules.make
#
# Makefile for the Linux/SuperH kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: kernel.o head.o init_task.o
clean:
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := io.o io_generic.o io_hd64461.o setup_hd64461.o sh_ksyms.o
......
#
# Makefile for STMicroelectronics board specific parts of the kernel
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
all: stboards.o
O_TARGET := stboards.o
obj-y := irq.o setup.o mach.o led.o
clean:
obj-y := irq.o setup.o mach.o led.o
include $(TOPDIR)/Rules.make
# $Id: Makefile,v 1.62 2000/12/15 00:41:17 davem Exp $
# Makefile for the linux kernel.
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#
# Note 2! The CFLAGS definitions are now in the main makefile...
SH = $(CONFIG_SHELL)
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
EXTRA_AFLAGS := -ansi
......@@ -34,8 +28,7 @@ ifdef CONFIG_SUNOS_EMUL
obj-y += sys_sunos.o sunos_ioctl.o
endif
head.o: head.S
$(CC) $(AFLAGS) -ansi -c $*.S -o $*.o
include $(TOPDIR)/Rules.make
check_asm: FORCE
@if [ ! -r $(HPATH)/asm/asm_offsets.h ] ; then \
......@@ -126,6 +119,3 @@ check_asm: FORCE
else \
mv -f asm_offsets.h $(HPATH)/asm/asm_offsets.h; \
fi
include $(TOPDIR)/Rules.make
......@@ -6,9 +6,8 @@ SH = $(CONFIG_SHELL)
EXTRA_AFLAGS := -ansi
all: kernel.o head.o init_task.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o init_task.o
export-objs := sparc64_ksyms.o
obj-y := process.o setup.o cpu.o idprom.o \
......@@ -32,10 +31,6 @@ else
endif
endif
head.o: head.S ttable.S itlb_base.S dtlb_base.S dtlb_backend.S dtlb_prot.S \
etrap.S rtrap.S winfixup.S entry.S
$(CC) $(AFLAGS) -ansi -c $*.S -o $*.o
#
# This is just to get the dependencies...
#
......@@ -48,3 +43,6 @@ else
endif
include $(TOPDIR)/Rules.make
head.o: head.S ttable.S itlb_base.S dtlb_base.S dtlb_backend.S dtlb_prot.S \
etrap.S rtrap.S winfixup.S entry.S
......@@ -2,14 +2,11 @@
# Makefile for the ia32 kernel emulation subsystem.
#
export-objs := ia32_ioctl.o
O_TARGET := ia32.o
all: ia32.o
export-objs := ia32_ioctl.o
O_TARGET := ia32.o
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o ia32_signal.o \
ia32_binfmt.o fpu32.o socket32.o ptrace32.o
clean::
include $(TOPDIR)/Rules.make
......@@ -2,12 +2,8 @@
# Makefile for the linux kernel.
#
EXTRA_AFLAGS := -traditional
all: kernel.o head.o head64.o init_task.o
O_TARGET := kernel.o
O_TARGET := kernel.o
EXTRA_TARGETS := head.o head64.o init_task.o
export-objs := mtrr.o msr.o cpuid.o x8664_ksyms.o
......@@ -31,5 +27,7 @@ obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o
#obj-$(CONFIG_ACPI_SLEEP) += acpi_wakeup.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
EXTRA_AFLAGS := -traditional
include $(TOPDIR)/Rules.make
......@@ -12,6 +12,10 @@ include $(TOPDIR)/Rules.make
version.o: ../include/linux/compile.h
# 'make dep' may add a dependency on $(TOPDIR)/include/linux/compile.h
$(TOPDIR)/include/linux/compile.h: ../include/linux/compile.h ;
# compile.h changes depending on hostname, generation number, etc,
# so we regenerate it always.
# mkcompile_h will make sure to only update the
......
......@@ -49,7 +49,6 @@
#include <linux/file.h>
#include <linux/utsname.h>
#include <linux/version.h>
#include <linux/compile.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/init.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment