Commit fca6825a authored by Bjorn Helgaas's avatar Bjorn Helgaas Committed by Jesse Barnes

PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge

We always look up hotplug_params with decode_hpp() immediately before using
them, so we don't need to save them in the acpiphp_bridge struct.  This
patch follows the example of program_fw_provided_values() in pciehp_pci.c
and shpchp_pci.c by just keeping the params on the stack while we need them.
Signed-off-by: default avatarBjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: default avatarAlex Chiang <achiang@hp.com>
Reviewed-by: default avatarKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: default avatarKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent dffb4bb5
......@@ -91,9 +91,6 @@ struct acpiphp_bridge {
/* PCI-to-PCI bridge device */
struct pci_dev *pci_dev;
/* ACPI 2.0 _HPP parameters */
struct hotplug_params hpp;
spinlock_t res_lock;
};
......
......@@ -59,7 +59,7 @@ static DEFINE_SPINLOCK(ioapic_list_lock);
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
static void acpiphp_sanitize_bus(struct pci_bus *bus);
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
static void acpiphp_set_hpp_values(struct pci_bus *bus);
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
/* callback routine to check for the existence of a pci dock device */
......@@ -273,23 +273,23 @@ static int detect_ejectable_slots(acpi_handle handle)
/* decode ACPI 2.0 _HPP hot plug parameters */
static void decode_hpp(struct acpiphp_bridge *bridge)
static void decode_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
{
acpi_status status;
status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp);
status = acpi_get_hp_params_from_firmware(dev->bus, hpp);
if (ACPI_FAILURE(status) ||
!bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) {
!hpp->t0 || (hpp->t0->revision > 1)) {
/* use default numbers */
printk(KERN_WARNING
"%s: Could not get hotplug parameters. Use defaults\n",
__func__);
bridge->hpp.t0 = &bridge->hpp.type0_data;
bridge->hpp.t0->revision = 0;
bridge->hpp.t0->cache_line_size = 0x10;
bridge->hpp.t0->latency_timer = 0x40;
bridge->hpp.t0->enable_serr = 0;
bridge->hpp.t0->enable_perr = 0;
hpp->t0 = &hpp->type0_data;
hpp->t0->revision = 0;
hpp->t0->cache_line_size = 0x10;
hpp->t0->latency_timer = 0x40;
hpp->t0->enable_serr = 0;
hpp->t0->enable_perr = 0;
}
}
......@@ -1037,7 +1037,7 @@ static int __ref enable_device(struct acpiphp_slot *slot)
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
acpiphp_set_hpp_values(slot->bridge->handle, bus);
acpiphp_set_hpp_values(bus);
list_for_each_entry(func, &slot->funcs, sibling)
acpiphp_configure_ioapics(func->handle);
pci_enable_bridges(bus);
......@@ -1248,7 +1248,7 @@ static int acpiphp_check_bridge(struct acpiphp_bridge *bridge)
return retval;
}
static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
static void program_hpp(struct pci_dev *dev, struct hotplug_params *hpp)
{
u16 pci_cmd, pci_bctl;
struct pci_dev *cdev;
......@@ -1263,15 +1263,15 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
return;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
bridge->hpp.t0->cache_line_size);
hpp->t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
bridge->hpp.t0->latency_timer);
hpp->t0->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
if (bridge->hpp.t0->enable_serr)
if (hpp->t0->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
if (bridge->hpp.t0->enable_perr)
if (hpp->t0->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
......@@ -1280,13 +1280,13 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
/* Program bridge control value and child devices */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
bridge->hpp.t0->latency_timer);
hpp->t0->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
if (bridge->hpp.t0->enable_serr)
if (hpp->t0->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
if (bridge->hpp.t0->enable_perr)
if (hpp->t0->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
......@@ -1294,24 +1294,20 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
if (dev->subordinate) {
list_for_each_entry(cdev, &dev->subordinate->devices,
bus_list)
program_hpp(cdev, bridge);
program_hpp(cdev, hpp);
}
}
}
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus)
static void acpiphp_set_hpp_values(struct pci_bus *bus)
{
struct acpiphp_bridge bridge;
struct pci_dev *dev;
struct hotplug_params hpp;
memset(&bridge, 0, sizeof(bridge));
bridge.handle = handle;
bridge.pci_bus = bus;
bridge.pci_dev = bus->self;
decode_hpp(&bridge);
list_for_each_entry(dev, &bus->devices, bus_list)
program_hpp(dev, &bridge);
list_for_each_entry(dev, &bus->devices, bus_list) {
decode_hpp(dev, &hpp);
program_hpp(dev, &hpp);
}
}
/*
......@@ -1355,7 +1351,7 @@ static int acpiphp_configure_bridge (acpi_handle handle)
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
acpiphp_set_hpp_values(handle, bus);
acpiphp_set_hpp_values(bus);
pci_enable_bridges(bus);
acpiphp_configure_ioapics(handle);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment