ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2)

* Fix pmac_ide_dma_check() to use pmac_ide_tune_chipset() and remove no longer
  necessary pmac_ide_{m,u}dma_enable().

* While at it remove some dead code from pmac_ide_dma_check() (leftovers from
  conversion to use ide_max_dma_mode()).

There should be no functionality changes caused by this patch.

v2:
* Fix compile by replacing "id" with "drive->id" in pmac_ide_dma_check()
  (Noticed by Ben).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 78103940
...@@ -1670,94 +1670,6 @@ pmac_ide_destroy_dmatable (ide_drive_t *drive) ...@@ -1670,94 +1670,6 @@ pmac_ide_destroy_dmatable (ide_drive_t *drive)
} }
} }
/*
* Pick up best MDMA timing for the drive and apply it
*/
static int
pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
u32 *timings, *timings2;
u32 timing_local[2];
int ret;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
/* Copy timings to local image */
timing_local[0] = *timings;
timing_local[1] = *timings2;
/* Calculate controller timings */
set_timings_mdma(drive, pmif->kind, &timing_local[0], &timing_local[1], mode);
/* Set feature on drive */
printk(KERN_INFO "%s: Enabling MultiWord DMA %d\n", drive->name, mode & 0xf);
ret = pmac_ide_do_setfeature(drive, mode);
if (ret) {
printk(KERN_WARNING "%s: Failed !\n", drive->name);
return 0;
}
/* Apply timings to controller */
*timings = timing_local[0];
*timings2 = timing_local[1];
return 1;
}
/*
* Pick up best UDMA timing for the drive and apply it
*/
static int
pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
u32 *timings, *timings2;
u32 timing_local[2];
int ret;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
/* Copy timings to local image */
timing_local[0] = *timings;
timing_local[1] = *timings2;
/* Calculate timings for interface */
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6)
ret = set_timings_udma_ata6( &timing_local[0],
&timing_local[1],
mode);
else if (pmif->kind == controller_sh_ata6)
ret = set_timings_udma_shasta( &timing_local[0],
&timing_local[1],
mode);
else
ret = set_timings_udma_ata4(&timing_local[0], mode);
if (ret)
return 0;
/* Set feature on drive */
printk(KERN_INFO "%s: Enabling Ultra DMA %d\n", drive->name, mode & 0x0f);
ret = pmac_ide_do_setfeature(drive, mode);
if (ret) {
printk(KERN_WARNING "%s: Failed !\n", drive->name);
return 0;
}
/* Apply timings to controller */
*timings = timing_local[0];
*timings2 = timing_local[1];
return 1;
}
/* /*
* Check what is the best DMA timing setting for the drive and * Check what is the best DMA timing setting for the drive and
* call appropriate functions to apply it. * call appropriate functions to apply it.
...@@ -1765,14 +1677,13 @@ pmac_ide_udma_enable(ide_drive_t *drive, u16 mode) ...@@ -1765,14 +1677,13 @@ pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
static int static int
pmac_ide_dma_check(ide_drive_t *drive) pmac_ide_dma_check(ide_drive_t *drive)
{ {
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
int enable = 1; int enable = 1;
drive->using_dma = 0; drive->using_dma = 0;
if (drive->media == ide_floppy) if (drive->media == ide_floppy)
enable = 0; enable = 0;
if (((id->capability & 1) == 0) && !__ide_dma_good_drive(drive)) if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive))
enable = 0; enable = 0;
if (__ide_dma_bad_drive(drive)) if (__ide_dma_bad_drive(drive))
enable = 0; enable = 0;
...@@ -1780,13 +1691,8 @@ pmac_ide_dma_check(ide_drive_t *drive) ...@@ -1780,13 +1691,8 @@ pmac_ide_dma_check(ide_drive_t *drive)
if (enable) { if (enable) {
u8 mode = ide_max_dma_mode(drive); u8 mode = ide_max_dma_mode(drive);
if (mode >= XFER_UDMA_0) if (mode && pmac_ide_tune_chipset(drive, mode) == 0)
drive->using_dma = pmac_ide_udma_enable(drive, mode); drive->using_dma = 1;
else if (mode >= XFER_MW_DMA_0)
drive->using_dma = pmac_ide_mdma_enable(drive, mode);
/* Apply settings to controller */
pmac_ide_do_update_timings(drive);
} }
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment