HID: i2c-hid: Reset ALPS touchpads on resume

Commit 52cf93e6 ("HID: i2c-hid: Don't reset device upon system
resume") fixes many touchpads and touchscreens, however ALPS touchpads
start to trigger IRQ storm after system resume.

Since it's total silence from ALPS, let's bring the old behavior back
to ALPS touchpads.

Fixes: 52cf93e6 ("HID: i2c-hid: Don't reset device upon system resume")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/i2c-hid/i2c-hid-core.c

@@ -48,6 +48,7 @@
 #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
 #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(1)
 #define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
+#define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
 
 /* flags */
 #define I2C_HID_STARTED		0
@@ -174,6 +175,8 @@ static const struct i2c_hid_quirks {
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
 		 I2C_HID_QUIRK_BOGUS_IRQ },
+	{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
+		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ 0, 0 }
 };
 
@@ -1214,8 +1217,15 @@ static int i2c_hid_resume(struct device *dev)
 	 * solves "incomplete reports" on Raydium devices 2386:3118 and
 	 * 2386:4B33 and fixes various SIS touchscreens no longer sending
 	 * data after a suspend/resume.
+	 *
+	 * However some ALPS touchpads generate IRQ storm without reset, so
+	 * let's still reset them here.
 	 */
-	ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+	if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
+		ret = i2c_hid_hwreset(client);
+	else
+		ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+
 	if (ret)
 		return ret;