Commit fd7e5b7a authored by Lijun Pan's avatar Lijun Pan Committed by Scott Wood

powerpc/mpc85xx: Remove P1023 RDS support

P1023RDS is no longer supported/manufactured by Freescale while P1023RDB is.
Signed-off-by: default avatarLijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
parent aa80581d
/*
* P1023 RDS Device Tree Source
*
* Copyright 2010-2011 Freescale Semiconductor Inc.
*
* Author: Roy Zang <tie-fei.zang@freescale.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
soc: soc@ff600000 {
ranges = <0x0 0x0 0xff600000 0x200000>;
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
spi@7000 {
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db081d";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
label = "u-boot-spi";
reg = <0x00000000 0x00080000>;
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
label = "dtb-spi";
reg = <0x00080000 0x00080000>;
read-only;
};
};
};
usb@22000 {
dr_mode = "host";
phy_type = "ulpi";
};
};
lbc: localbus@ff605000 {
reg = <0 0xff605000 0 0x1000>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xe0000000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x02000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "ramdisk";
reg = <0x00000000 0x01c00000>;
};
partition@1c00000 {
label = "kernel";
reg = <0x01c00000 0x002e0000>;
};
partiton@1ee0000 {
label = "dtb";
reg = <0x01ee0000 0x00020000>;
};
partition@1f00000 {
label = "firmware";
reg = <0x01f00000 0x00080000>;
read-only;
};
partition@1f80000 {
label = "u-boot";
reg = <0x01f80000 0x00080000>;
read-only;
};
};
fpga@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1023rds-fpga";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr@20 {
compatible = "fsl,p1023rds-bcsr";
reg = <0x20 0x20>;
};
};
};
pci0: pcie@ff60a000 {
reg = <0 0xff60a000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
pcie@0 {
/* IRQ[0:3] are pulled up on board, set to active-low */
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
board_pci1: pci1: pcie@ff609000 {
reg = <0 0xff609000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
/*
* IRQ[4:6] only for PCIe, set to active-high,
* IRQ[7] is pulled up on board, set to active-low
*/
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 2 0 0
0000 0 0 2 &mpic 5 2 0 0
0000 0 0 3 &mpic 6 2 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ff60b000 {
reg = <0 0xff60b000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
/*
* IRQ[8:10] are pulled up on board, set to active-low
* IRQ[11] only for PCIe, set to active-high,
*/
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 8 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 2 0 0
>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1023si-post.dtsi"
...@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y ...@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y CONFIG_SOCRATES=y
CONFIG_KSI8560=y CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y CONFIG_XES_MPC85xx=y
......
...@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y ...@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y CONFIG_P1022_DS=y
CONFIG_P1022_RDK=y CONFIG_P1022_RDK=y
CONFIG_P1023_RDB=y CONFIG_P1023_RDB=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y CONFIG_SOCRATES=y
CONFIG_KSI8560=y CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y CONFIG_XES_MPC85xx=y
......
...@@ -117,11 +117,11 @@ config P1022_RDK ...@@ -117,11 +117,11 @@ config P1022_RDK
This option enables support for the Freescale / iVeia P1022RDK This option enables support for the Freescale / iVeia P1022RDK
reference board. reference board.
config P1023_RDS config P1023_RDB
bool "Freescale P1023 RDS/RDB" bool "Freescale P1023 RDB"
select DEFAULT_UIMAGE select DEFAULT_UIMAGE
help help
This option enables support for the P1023 RDS and RDB boards This option enables support for the P1023 RDB board.
config TWR_P102x config TWR_P102x
bool "Freescale TWR-P102x" bool "Freescale TWR-P102x"
......
...@@ -17,7 +17,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o ...@@ -17,7 +17,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_STX_GP3) += stx_gp3.o
......
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
* Author: Roy Zang <tie-fei.zang@freescale.com> * Author: Roy Zang <tie-fei.zang@freescale.com>
* *
* Description: * Description:
* P1023 RDS Board Setup * P1023 RDB Board Setup
* *
* This program is free software; you can redistribute it and/or modify it * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the * under the terms of the GNU General Public License as published by the
...@@ -41,12 +41,12 @@ ...@@ -41,12 +41,12 @@
* Setup the architecture * Setup the architecture
* *
*/ */
static void __init mpc85xx_rds_setup_arch(void) static void __init mpc85xx_rdb_setup_arch(void)
{ {
struct device_node *np; struct device_node *np;
if (ppc_md.progress) if (ppc_md.progress)
ppc_md.progress("p1023_rds_setup_arch()", 0); ppc_md.progress("p1023_rdb_setup_arch()", 0);
/* Map BCSR area */ /* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr"); np = of_find_node_by_name(NULL, "bcsr");
...@@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void) ...@@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void)
fsl_pci_assign_primary(); fsl_pci_assign_primary();
} }
machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices); machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
static void __init mpc85xx_rds_pic_init(void) static void __init mpc85xx_rdb_pic_init(void)
{ {
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU, MPIC_SINGLE_DEST_CPU,
...@@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void) ...@@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void)
mpic_init(mpic); mpic_init(mpic);
} }
static int __init p1023_rds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
}
static int __init p1023_rdb_probe(void) static int __init p1023_rdb_probe(void)
{ {
unsigned long root = of_get_flat_dt_root(); unsigned long root = of_get_flat_dt_root();
...@@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void) ...@@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void)
} }
define_machine(p1023_rds) {
.name = "P1023 RDS",
.probe = p1023_rds_probe,
.setup_arch = mpc85xx_rds_setup_arch,
.init_IRQ = mpc85xx_rds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
#endif
};
define_machine(p1023_rdb) { define_machine(p1023_rdb) {
.name = "P1023 RDB", .name = "P1023 RDB",
.probe = p1023_rdb_probe, .probe = p1023_rdb_probe,
.setup_arch = mpc85xx_rds_setup_arch, .setup_arch = mpc85xx_rdb_setup_arch,
.init_IRQ = mpc85xx_rds_pic_init, .init_IRQ = mpc85xx_rdb_pic_init,
.get_irq = mpic_get_irq, .get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart, .restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr, .calibrate_decr = generic_calibrate_decr,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment