powerpc/83xx: Add support for MPC8377E-WLAN boards

MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/platforms/83xx/Kconfig

@@ -75,11 +75,11 @@ config MPC837x_MDS
 	  This option enables support for the MPC837x MDS Processor Board.
 
 config MPC837x_RDB
-	bool "Freescale MPC837x RDB"
+	bool "Freescale MPC837x RDB/WLAN"
 	select DEFAULT_UIMAGE
 	select PPC_MPC837x
 	help
-	  This option enables support for the MPC837x RDB Board.
+	  This option enables support for the MPC837x RDB and WLAN Boards.
 
 config SBC834x
 	bool "Wind River SBC834x"

arch/powerpc/platforms/83xx/mpc837x_rdb.c

@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void)
 
 	return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
 	       of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
-	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
+	       of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
 }
 
 define_machine(mpc837x_rdb) {
-	.name			= "MPC837x RDB",
+	.name			= "MPC837x RDB/WLAN",
 	.probe			= mpc837x_rdb_probe,
 	.setup_arch		= mpc837x_rdb_setup_arch,
 	.init_IRQ		= mpc837x_rdb_init_IRQ,